junco Posted September 28, 2021 Share Posted September 28, 2021 If the quality of the Lancaster is as good as Borders Tiger 1 and Crusader kits you will be more than happy! But it seems there are those that want to moan about something.... Hopefully the rest of WNW range resurface under Borders label? Neil 2 Link to comment Share on other sites More sharing options...
VMA131Marine Posted September 28, 2021 Share Posted September 28, 2021 5 hours ago, Beermonster1958 said: It's all of these and, it's unaffordable too!! šš. (well, I didn't want to disappoint you! John āUnaffordableā is a relative concept. This kit is probably going to take 6 months to a year to build to do it justice and Iād bet that most modelers who build in this scale spend more than the eventual cost of this kit in 6 months. Itās a question of priorities. 4 Link to comment Share on other sites More sharing options...
VMA131Marine Posted September 28, 2021 Share Posted September 28, 2021 37 minutes ago, junco said: If the quality of the Lancaster is as good as Borders Tiger 1 and Crusader kits you will be more than happy! But it seems there are those that want to moan about something.... Hopefully the rest of WNW range resurface under Borders label? Neil Given weāre talking Wingnut Wings quality, I doubt it will disappoint. However, I would not expect the instructions to be up to WnW standard unless they got help from former WnW staff. Link to comment Share on other sites More sharing options...
Don149 Posted September 28, 2021 Share Posted September 28, 2021 I`ve got two HK Lancs , one " flying " with full crew and one being bombed up , so I`m immune to it all .Ā ( Says he , nervously ) . 5 Link to comment Share on other sites More sharing options...
janneman36 Posted September 28, 2021 Share Posted September 28, 2021 32 minutes ago, Don149 said: I`ve got two HK Lancs , one " flying " with full crew and one being bombed up , so I`m immune to it all .Ā ( Says he , nervously ) . Yeah right... 1 Link to comment Share on other sites More sharing options...
colin Posted September 28, 2021 Share Posted September 28, 2021 Wonder why there won't be a nose section kit, that would be a better earner in the long run for Border I would have thought. Glad I managed to getĀ a HK one when they were about, because the full 1/32 kit would 1- Got no where to display it when built 2-Too scared to start it because of the price 3- Take me for ever to build it, and would just give up in the end due to number 1 being in the back of my mind when building it š¤£ 1 Link to comment Share on other sites More sharing options...
Bertie McBoatface Posted September 28, 2021 Share Posted September 28, 2021 51 minutes ago, Don149 said: I`ve got two HK Lancs , one " flying " with full crew and one being bombed up , so I`m immune to it all .Ā ( Says he , nervously ) . Ā Such a shame to waste your skills, experience and knowledge, acquired on those two, by not building this one as well...Ā Ā š 2 Link to comment Share on other sites More sharing options...
keithjs Posted September 29, 2021 Share Posted September 29, 2021 I see its now available to pre order from Lucky Model at Ā£449 + Ā£55 postage. Of course that's assuming even if you tick all the right boxes you won't get clobbered for another Ā£100+ for VAT and import and handling fees. I think I 'll wait till Hannants get them (I guess they will?) Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 29, 2021 Share Posted September 29, 2021 3 minutes ago, keithjs said: I see its now available to pre order from Lucky Model at Ā£449 + Ā£55 postage. Of course that's assuming even if you tick all the right boxes you won't get clobbered for another Ā£100+ for VAT and import and handling fees. I think I 'll wait till Hannants get them (I guess they will?) I emailed Hannants earlier this week and they confirmed that they are aware of it but were waiting more details before listing it on their site and the couldn't confirm if it would be offered with the 10% pre-order discount. I also feel like this might be the right route although maybe Luck Models price includes UK Vat? I know that some Chinese sellers (via eBay) include Vat at the point of purchase. Link to comment Share on other sites More sharing options...
keithjs Posted September 29, 2021 Share Posted September 29, 2021 I wouldn't think that Ā price includes UK VAT because if you check all the other countries prices against current exchange rates there's only about Ā£6 to Ā£8 difference.. Link to comment Share on other sites More sharing options...
elderly Posted September 29, 2021 Share Posted September 29, 2021 13 minutes ago, Simon Cornes said: emailed Hannants earlier this week and they confirmed that they are aware of it but were waiting more details before listing it on their site and the couldn't confirm if it would be offered with the 10% pre-order discount. They still have the HKM @ Ā£399 and so the Border Models Lancaster will be rather more than that. Ā I want one but I'm in no hurry for it to join the stash. There wasĀ much interest in the HKM when it first appeared, but in reality I wonder how many sold? With a little patience I got mine when a well known retailer advertised a 25% discount to RRP. Link to comment Share on other sites More sharing options...
224 Peter Posted September 29, 2021 Share Posted September 29, 2021 I have to have one...Ā to go with out 1:1 scale Lancaster kit!!Ā Christmas present.Ā Ā£450... I may have to liquidate some of the stash!Ā I'll e-mail Hannants!Ā 1 Link to comment Share on other sites More sharing options...
keithjs Posted September 29, 2021 Share Posted September 29, 2021 24 minutes ago, 224 Peter said: I have to have one...Ā to go with out 1:1 scale Lancaster kit!!Ā Christmas present.Ā Ā£450... I may have to liquidate some of the stash!Ā I'll e-mail Hannants!Ā Mmm, good idea. I might let a few of my Wingnuts stash go for extortionate prices...I'm never going make them all... Link to comment Share on other sites More sharing options...
Peter Roberts Posted September 29, 2021 Share Posted September 29, 2021 (edited) 3 hours ago, keithjs said: I see its now available to pre order from Lucky Model at Ā£449 + Ā£55 postage. Of course that's assuming even if you tick all the right boxes you won't get clobbered for another Ā£100+ for VAT and import and handling fees. I think I 'll wait till Hannants get them (I guess they will?) Ā Close to 500 UKP = close to A$1,000! Then thereās the seat belts, photo etch for the cockpit, radio compartment, Navigators station,Ā bombardiers compartment andĀ bomb bay. There HAS to be sets for all the turrets. Oh, and resin weighted wheels, resin exhausts (open ended, much finer than mere plastic), metal gun barrels, canopy masks, and of course the 3D printed interior bits that complement or better some of the photo etch, photo etch radiator fronts, and the inevitable decal sheet that has āThatā scheme that I always wanted to do. Of course, Iāll change my mind a lot on the subject for the model so end up buying multiple decal sheets.Ā Hang on, I want to leave the rear fuselage door open, so thereās all that interior, shell chutes and ammo, elsan, etc. Oh dearā¦ will have to sellĀ the first AND second born. Maybe talk the missus into coming out of retirement and work two jobs. Are the coal mines still operating? Edited September 29, 2021 by Peter Roberts 4 Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 29, 2021 Share Posted September 29, 2021 2 hours ago, Peter Roberts said: Ā Close to 500 UKP = close to A$1,000! Then thereās the seat belts, photo etch for the cockpit, radio compartment, Navigators station,Ā bombardiers compartment andĀ bomb bay. There HAS to be sets for all the turrets. Oh, and resin weighted wheels, resin exhausts (open ended, much finer than mere plastic), metal gun barrels, canopy masks, and of course the 3D printed interior bits that complement or better some of the photo etch, photo etch radiator fronts, and the inevitable decal sheet that has āThatā scheme that I always wanted to do. Of course, Iāll change my mind a lot on the subject for the model so end up buying multiple decal sheets.Ā Hang on, I want to leave the rear fuselage door open, so thereās all that interior, shell chutes and ammo, elsan, etc. Oh dearā¦ will have to sellĀ the first AND second born. Maybe talk the missus into coming out of retirement and work two jobs. Are the coal mines still operating? Well, if this is the kit that Iāve seen at Telford then you might want HGW straps and possibly Master barrels but everything else should be in the box, with a caveat on the decals - you may well need something better if the Border ones arenāt Cartograph or similar. But itās still a bit expensive !! 1 Link to comment Share on other sites More sharing options...
TIGER HOBBIESLIMITED Posted September 29, 2021 Share Posted September 29, 2021 (edited) The RRP for the new Ex Wing Nut model in Europe as just been released 699.99 Euro or there about's,Ā also to muddy the waters Hong Kong Models have released a 3 in 1 version of theIrĀ 1/32 Lancaster B1/BIII/Dambusters all for Ā£399.99 RRP Edited September 29, 2021 by TIGER HOBBIESLIMITED Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 29, 2021 Share Posted September 29, 2021 8 minutes ago, TIGER HOBBIESLIMITED said: The RRP for the new Ex Wing Nut model in Europe as just been released 699.99 Euro or there about's,Ā also to muddy the waters Hong Kong Models have released a 3 in 1 version of theIrĀ 1/32 Lancaster B1/BIII/Dambusters all for Ā£399.99 RRP So thats Ā£605, give or take a few pence. I suppose that's Ā£500 plus 20% VAT. Wow! Even with 10% off for pre-order, thats pretty amazing. Almost invites you to buy it from China and risk getting zapped for duty. If you escape then you've made a killing, if you don't then you're no worse off! Link to comment Share on other sites More sharing options...
elderly Posted September 29, 2021 Share Posted September 29, 2021 It's advertised at MBK for ā¬599 including VAT. Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 29, 2021 Share Posted September 29, 2021 (edited) 12 minutes ago, elderly said: It's advertised at MBK for ā¬599 including VAT. So Ā£518. That's getting better but I bet they'd charge postage on top. This is giving Hannants loads of scope! And they expect it March 2022 Edited September 29, 2021 by Simon Cornes Availability date included Link to comment Share on other sites More sharing options...
elderly Posted September 29, 2021 Share Posted September 29, 2021 10 minutes ago, Simon Cornes said: So Ā£518. That's getting better but I bet they'd charge postage on top. This is giving Hannants loads of scope! And they expect it March 2022 Iāve purchased kits from MBK (before Brexit) and above a certain spend they did not charge me postage. There will of course now be Customs handling charges by the couriers. Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 29, 2021 Share Posted September 29, 2021 I wonder how much that would be then? I have used MBK when they were selling Wingnut last year - the last supply - and I found them very reasonable - they charged Wingnut standard RRP when they could have made a killing.Ā Ā Link to comment Share on other sites More sharing options...
jenko Posted September 29, 2021 Share Posted September 29, 2021 I'm in a quandy ......... which is cheaper. ...... thisĀ kit or a divorce ???? Ā Dick Ā SWMBO is out of the room at the momentĀ 4 Link to comment Share on other sites More sharing options...
TIGER HOBBIESLIMITED Posted September 29, 2021 Share Posted September 29, 2021 The UK RRP as not yet been released, one of the UK seller who does quite good discount normally is still out at Ā£600ishĀ Link to comment Share on other sites More sharing options...
rowmk9 Posted September 29, 2021 Share Posted September 29, 2021 As beautiful as this model is, I can't help but feel it's an expensive waste of plastic to all but a handful of people. Who has space to display a 1/32 Lancaster? I suspect 90% of the models sold will sit in stashes and then eventually get shifted around as collector's pieces. I mean if that's what you like...you do you I guess, but for me, this model doesn't make sense.Ā 1 Link to comment Share on other sites More sharing options...
Paul Thompson Posted September 29, 2021 Share Posted September 29, 2021 5 minutes ago, rowmk9 said: As beautiful as this model is, I can't help but feel it's an expensive waste of plastic to all but a handful of people. Who has space to display a 1/32 Lancaster? I suspect 90% of the models sold will sit in stashes and then eventually get shifted around as collector's pieces. I mean if that's what you like...you do you I guess, but for me, this model doesn't make sense.Ā That's not going to bother the manufacturer, so long as they do sell, so from their point of view it's perfect sense. Ā Paul. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now