Uncle Pete Posted September 26, 2018 Share Posted September 26, 2018 I need a little help here, lads.... I'm in the process of beating a confession out of Italeri's 1/72 A10 and it comes with this little fella for the leading edge.... ... I'm assuming it's slats and should be fitted thusly.... Unfortunately there's no post-installation picture in the instructions and the box art seems to show them closed (and if installed closed, I'd have to cut off those little pegs). I've poked around on the internet but can't seem to find any pictures of them open. Before I get the glue out and the vicar says, "Till death do you part," any insight would be much appreciated. Link to comment Share on other sites More sharing options...
Muzz Posted September 26, 2018 Share Posted September 26, 2018 No expert but there fixed in place and don’t move so don’t remove the tabs that hold them proud of the main wing, also in the photo you show above it looks like you have them the wrong way round, the thicker leading edge should be facing forward. regards Muzz 1 1 Link to comment Share on other sites More sharing options...
72modeler Posted September 26, 2018 Share Posted September 26, 2018 1 hour ago, Muzz said: No expert but there fixed in place and don’t move so don’t remove the tabs that hold them proud of the main wing, also in the photo you show above it looks like you have them the wrong way round, the thicker leading edge should be facing forward. regards Muzz Yep! Muzz is correct. I have attached a link to some A-10 photos that show the fixed slat, as well as some that are just pretty neat! Love them Hawgs! Mike http://www.ahctv.com/a-10-warthog-photo-gallery/ 2 1 Link to comment Share on other sites More sharing options...
Creepy Pete Posted September 26, 2018 Share Posted September 26, 2018 There's also a very decent walkaround page here on BM: 1 Link to comment Share on other sites More sharing options...
Uncle Pete Posted September 27, 2018 Author Share Posted September 27, 2018 10 hours ago, Muzz said: looks like you have them the wrong way round I was afraid somebody would say that! Yesterday I realised I'd painted the ailerons upside down. Up until that point the build had been going deceptively smoothly. 9 hours ago, 72modeler said: I have attached a link Appreciate it but for some reason it says the link won't open in West London. (Actually, it wasn't quite that specific but you get the idea!) 9 hours ago, Creepy Pete said: walkaround page Cheers. I'd shoved Warthog and A10 into the search thingy but evidently that one didn't pop out high enough on the list to bring itself to my attention (or, more likely, I was asleep at the switch again) and Google Images wouldn't give me anything close enough or from the right angle to show it up. Thanks, lads, somebody always comes through on this site. It was just a matter of finding a pic from the correct angle . Onward and upward as soon as I've finished stripping and reapplying paint to the little devils. My "I gotta buy this bloke a pint" list is getting longer! 🍺 Link to comment Share on other sites More sharing options...
Tonka Posted September 27, 2018 Share Posted September 27, 2018 (edited) Hi, Some pics I found at http://www.primeportal.net/hangar/a-10_home.htm reproduced here under fair use of images for illustrations purposes only. https://www.air-and-space.com/20120503 Goldwater/20120503 BMGR_0378 A-10C 79-0108 175FW left rear in flight l.jpg . That's it !! Tonka Edited September 27, 2018 by Tonka 1 2 Link to comment Share on other sites More sharing options...
Nachtwulf Posted September 27, 2018 Share Posted September 27, 2018 14 hours ago, Muzz said: No expert but there fixed in place and don’t move so don’t remove the tabs that hold them proud of the main wing, also in the photo you show above it looks like you have them the wrong way round, the thicker leading edge should be facing forward. regards Muzz I may be mistaken but I believe they do in fact move up and down depending on angle of attack. 1 Link to comment Share on other sites More sharing options...
Uncle Pete Posted September 27, 2018 Author Share Posted September 27, 2018 5 hours ago, Tonka said: Some pics I found Thanks, those are really up close and personal. Trouble is, they are so clear you've taken away my excuse if they don't come out right! 1 Link to comment Share on other sites More sharing options...
72modeler Posted September 27, 2018 Share Posted September 27, 2018 Tonka- outstanding photos! Better than the ones in my link! I have filed these puppies away for future reference- thanks so much for the post! Uncle Pete- Sorry you couldn't open my link; not sure what's going on there, as my other modeling cohorts said it opened OK for them...gotta love cyberspace, right? Mike 1 Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted September 27, 2018 Share Posted September 27, 2018 11 hours ago, Nachtwulf said: I may be mistaken but I believe they do in fact move up and down depending on angle of attack. They are fixed. They are fitted to alleviate the problem of ingesting gun gases into the engines. Any further questions, we have our own pet Hawg. They are not painted red either. Airframe colours. 3 Link to comment Share on other sites More sharing options...
Nachtwulf Posted September 27, 2018 Share Posted September 27, 2018 13 hours ago, Tonka said: Hi, Some pics I found at http://www.primeportal.net/hangar/a-10_home.htm reproduced here under fair use of images for illustrations purposes only. These pictures would seem to indicate that they move. Please correct me if I am mistaken. Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted September 27, 2018 Share Posted September 27, 2018 See post #10. We have one in our museum. Camera angles can be misleading. 47 minutes ago, Nachtwulf said: These pictures would seem to indicate that they move. Please correct me if I am mistaken. 1 Link to comment Share on other sites More sharing options...
AV O Posted September 27, 2018 Share Posted September 27, 2018 (edited) https://www.researchgate.net/publication/299955550_Air_Force_Academy_Contributions_to_Development_of_the_A-10_Drooped_Leading_Edge_Modification https://www.researchgate.net/publication/299955549_A-10_Wing_Leading_Edge_Effects_on_Engine_Stability_Part_1_-_Analysis_and_Evaluation_of_Wing_Leading_Edge_Configurations https://www.researchgate.net/publication/299958597_A-10_Wing_Leading_Edge_Effects_on_Engine_Stability_Part_2_-_Identifying_Total_Pressure_Distortion_Sources_and_the_Effects_on_EngineAirframe_Integration http://airvectors.net/ava10_1.html The engine position does have its liabilities. At high angles of attack, the wing can block airflow to the engines, and so a short leading-edge slat was installed between the fuselage and the main gear fairings, the slat opening automatically under hydraulic control at high angles of attack. The YA-10As uncovered the problem, and were fitted with fixed slot surfaces as an interim fix. Apparently the use of the leading-edge slats introduced another drawback in turn, in that it reduced indications to the pilot that the aircraft was going into a stall. A small strip was attached to the leading edge of each wing to ensure that the descent into a stall wasn't so abrupt. Edited September 27, 2018 by AV O 2 Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted September 27, 2018 Share Posted September 27, 2018 Ours do not move. It's possible that have been de-activated, but the other controls have not. Then again, ours has not flown in nearly 30 years. I will ask our Hog pilot instructor when I next see him. You have me intrigued. 1 Link to comment Share on other sites More sharing options...
AV O Posted September 27, 2018 Share Posted September 27, 2018 Some more about it here : https://www.airliners.net/forum/viewtopic.php?t=1010945 1 Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted September 27, 2018 Share Posted September 27, 2018 Interesting exchange. So we have a combination of AOA stall and gun gas. Surprised the guy was suspicious of the gun gas. The early Hunters were the same with the ADEN gases. Not cured until the Mk6 with the Avon engine mated to the Sapphire compressor stage. Also correct about changing the charge to alleviate the gas problems. The guy was half right about gun barrel temp with a long burst. If you hold the trigger down and exhaust all the ammo in one burst, the recoil slows the aircraft to such an extent that it stalls. 1 Link to comment Share on other sites More sharing options...
Nachtwulf Posted October 1, 2018 Share Posted October 1, 2018 On 9/27/2018 at 11:46 AM, bentwaters81tfw said: See post #10. We have one in our museum. Camera angles can be misleading. Here is a link to a video on the A-10. IT is a good video but if you want to, skip to 2:45 through 2:55 and 15:50 through 16:00 to see the slats in action. it is really quick. 1 Link to comment Share on other sites More sharing options...
AV O Posted October 10, 2018 Share Posted October 10, 2018 Thank you. Also at 6:50 --> 7:10 1 Link to comment Share on other sites More sharing options...
Nachtwulf Posted October 11, 2018 Share Posted October 11, 2018 On 10/10/2018 at 10:16 AM, AV O said: Thank you. Also at 6:50 --> 7:10 That was the best example and I missed it! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now