Martian Posted October 1, 2018 Share Posted October 1, 2018 Nearly there Ced and she is looking good! Martian 👽 1 Link to comment Share on other sites More sharing options...
CedB Posted October 1, 2018 Author Share Posted October 1, 2018 10 hours ago, giemme said: Either way, you have a gloss surface for the transfers to adhere - so, nice going! Ciao Thanks Giorgio - yes, and you don't have to wait for the gloss coat to dry! Impatient I am 9 hours ago, Morlock said: Nice work. I think the MB kit still stands up well. Thanks Morlock - it's a nice kit and goes together pretty well 9 hours ago, Courageous said: I'll have think on that idea too . Looking goos thoug Ced, even with the odd set-back. Stuart Thanks Stuart - mostly spills! I think my clumsy period has gone now, fingers crossed! 9 hours ago, 71chally said: The triangular horizontal fins are there (in fact you can just see their shadow in your pic), but Matchbox have overdone them a tad. I believe they controlled the air around the fin base. They are more obvious in this pic. http://data3.primeportal.net/hangar/mark_hayward/phantom_fgr.2/images/phantom_fgr.2_06_of_37.jpg 8 hours ago, Ex-FAAWAFU said: A tad?! 6 hours ago, keefr22 said: That is a better pic James, they are the 'plate' I was thinking of when responding to Dave's post #132 - I have to admit Ididn't realise said 'plate' was in fact two triangular ones - I thought they were rectangular and much closer to the fuselage - every day's a school day! Cracking looking Toom Ced, looks almost as good a kit as the brand new Airfix one (can you tell I'm very disappointed with Airfix's effort...?!) Shame really that Matchbox and Fujimi kits are fetching the same if not more on flea bay - seems I'm not the only one annoyed at Airfix!! Keith 2 hours ago, 71chally said: I 'spose plate is a better word for it really Keith, for some reason I had missed your responce at #132. I have just seen that our @Tailspin Turtle has done an article on it here ( http://tailspintopics.blogspot.com/2016/01/f4hf-4-phantom-ram-air-inlet-mysteries.html ) , interesting reading like all of Tommys' articles I was offered the fin off XV500 when it was scrapped and when I surveyed it before cutting I was surprised at how obvious that plate and intake are. It doesn't look so obvious when you're stood 5 ft under it! Thanks James, Crisp and Keith - useful info 8 hours ago, Terry1954 said: I like your decisive approach Ced! She's looking really good so far. Terry Thanks Terry - I'm always looking for quick solutions! 8 hours ago, 71chally said: Superb work Ced, you really have shown what can be achieved with this kit. Thanks James, really appreciated 8 hours ago, TheBaron said: 'Black nose, grey wings I ain't missin' not a single thing And pylons, red fin When I step out I'm gonna do you in They come runnin' just as fast as they can 'Cause every girl crazy 'bout a sharp dressed man FAA Phantom.' Yikes. Is dat der rap Bro? Street, innit… 7 hours ago, bbudde said: Tony, you should grow a long white beard, find two other companions ( maybe Beard is one?) and get a yourself a 33' Ford Eleminator and visit Ced to sing him a fine lullaby for his success. Cheers Thanks Ben 6 hours ago, hendie said: I put my head down for a couple of days to get some day-job-work done and when I raise my head, Ced's built the kit, painted it, stripped it, repainted it, ripped bits off the kit, stuck them back on, did the transfers, and been on bloomin' vacation! it does look nice though - even in those colors! Thanks Hendie - nice snail, just my sort! 5 hours ago, Ex-FAAWAFU said: Are there any other Brit Toom colours worth bothering with? No. 2 minutes ago, Martian Hale said: Nearly there Ced and she is looking good! Martian 👽 Thanks Martian Actually there now with final bits… While I was waiting for the satin varnish to dry I looked at the Airfix scheme from their new Phantom and added some colour to the load from that: Than it was on with the weapons: When they're dry I'll rip of the masking, have a final check and then post a link to an RFI here. What's next I hear you ask? Time I did something that's been in the stash for a while. I've had an easy break so why not a (gulp) Valom? I'm just doing the first post so don't rush over too quickly... but it'll be here. 11 Link to comment Share on other sites More sharing options...
Terry1954 Posted October 1, 2018 Share Posted October 1, 2018 Lovely job Ced. 1 Link to comment Share on other sites More sharing options...
hendie Posted October 1, 2018 Share Posted October 1, 2018 wot he said - very nice (and very quick!) 1 Link to comment Share on other sites More sharing options...
CedB Posted October 2, 2018 Author Share Posted October 2, 2018 Thanks Terry and Hendie Now in the RFI here. Thanks as always for your help, support and companionship during this build. Much appreciated and I've learnt a lot. 2 Link to comment Share on other sites More sharing options...
stevehnz Posted October 2, 2018 Share Posted October 2, 2018 (edited) 21 hours ago, 71chally said: They are more obvious in this pic. http://data3.primeportal.net/hangar/mark_hayward/phantom_fgr.2/images/phantom_fgr.2_06_of_37.jpg I just saved this pic to my files, strictly for own use of course, captioned it Phantom phin phins, how could I not find it again.. The Phantom is phairly phabulous Ced. Steve. Edited October 2, 2018 by stevehnz 2 Link to comment Share on other sites More sharing options...
Hamden Posted October 2, 2018 Share Posted October 2, 2018 Great result - superb workmanship! As always stunning out come to an old favourite looks every inch a Phantom Roger 1 Link to comment Share on other sites More sharing options...
CedB Posted October 2, 2018 Author Share Posted October 2, 2018 Phanks Steve Thanks Roger, very kind of you 1 Link to comment Share on other sites More sharing options...
Nikolay Polyakov Posted October 2, 2018 Share Posted October 2, 2018 On 30/09/2018 at 16:33, CedB said: Masked up and a thin coat of Tamiya Smoke to darken up appropriate areas: Great idea with Smoke Ced, I need to try it too 👍 1 Link to comment Share on other sites More sharing options...
CedB Posted October 2, 2018 Author Share Posted October 2, 2018 Thanks Nikolay - actually borrowed from another build here on BM! 1 Link to comment Share on other sites More sharing options...
Biggles87 Posted October 3, 2018 Share Posted October 3, 2018 First class! John 1 Link to comment Share on other sites More sharing options...
CedB Posted October 3, 2018 Author Share Posted October 3, 2018 Thanks John Link to comment Share on other sites More sharing options...
The Spadgent Posted October 5, 2018 Share Posted October 5, 2018 Nnnnggghhhh. And another one bites the dust. Either you’re speeding up or I’m slowing down. 🏋️♀️ Brilliant stuff. Bravo sir. RFI stop first and then over to your new one before that one gets finished too. 🤨 Johnny 1 Link to comment Share on other sites More sharing options...
CedB Posted October 5, 2018 Author Share Posted October 5, 2018 Thanks Johnny! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now