TimTam27 Posted October 2, 2018 Share Posted October 2, 2018 1 hour ago, spaddad said: Instead of putting it out at £19.99 like the bulk of their current single engine fighters & undercutting & outselling Airfix it'll probably be £35 or £40 like their latest issues. HobbyEasy.com have it listed for pre-order at GBP18.66. Link to comment Share on other sites More sharing options...
JackG Posted October 2, 2018 Share Posted October 2, 2018 Yes, bright roundel colours on the decal sheet - even the blue looks to be of the pre-1937 variety, or could just be caused by the light flashing? The separate wing tips, maybe to better capture their thickness?? The red centers of the fuselage roundels are also separate, for better registration? regards, Jack Link to comment Share on other sites More sharing options...
DominikS Posted October 2, 2018 Share Posted October 2, 2018 1 hour ago, mhaselden said: Not sure I like the design of the fuselage pieces. I suspect the more ham-fisted among us (looking at myself in the mirror here!) may struggle to align the separate cockpit surround with the rest of the fuselage. Actually I don't think there will be any problems. I believe that R&D team made it easy to build. If it were any other company I could have doubts, but not in this case. Saw many of you mentioning the price. Remember that Tamiya's main market is Japan and their prices are average. It would be same here in Europe but all this castoms and taxes made their kits expensive. But if you check how much are, for example, Eduard's kits in Japan, you'll see that Japanese modellers have the same problems. I think I'll be buying one every two months as Spitfire is my favourite plane. And I keep fingers crossed for later Marks (both short nose and long nose Merlins). 1 Link to comment Share on other sites More sharing options...
JackG Posted October 2, 2018 Share Posted October 2, 2018 Dom, you make a valid point about pricing, and does make sense, but even looking at prices between Hannants and HobbyEasy, and using Eduard's 109G as a comparison - they look about even. Only when an item is out of stock does the price jump. I'd say shop and compare, but that does not seem to help UK residents when ordering out of the country. They get dinged pretty hard with customs/taxes. regards, Jack Link to comment Share on other sites More sharing options...
Tbolt Posted October 2, 2018 Share Posted October 2, 2018 (edited) 3 hours ago, mhaselden said: Not sure I like the design of the fuselage pieces. I suspect the more ham-fisted among us (looking at myself in the mirror here!) may struggle to align the separate cockpit surround with the rest of the fuselage. Looking at the way they have engineered it, if it fits well I think it will be really hard to mess it up. Edited October 2, 2018 by Tbolt Link to comment Share on other sites More sharing options...
Tbolt Posted October 2, 2018 Share Posted October 2, 2018 23 minutes ago, JackG said: Dom, you make a valid point about pricing, and does make sense, but even looking at prices between Hannants and HobbyEasy, and using Eduard's 109G as a comparison - they look about even. Only when an item is out of stock does the price jump. I'd say shop and compare, but that does not seem to help UK residents when ordering out of the country. They get dinged pretty hard with customs/taxes. regards, Jack Yes by the time we've paid import VAT and handle fee you are probably close to what you could get it for in the UK, even if it a little more expensive in this country is rather pay it as if there us somthing wrong with it or missing from the kit it could be hassle sort it out buy from the east. I've bought kits before from HLJ but that's when the shipping and exchange rates were a lot better and the savings were worth the risk. Link to comment Share on other sites More sharing options...
rod mcq Posted October 2, 2018 Share Posted October 2, 2018 (edited) The UK RRP for the Spitfire will be £34.99 with the kit currently due in mid-January 2019 Edited October 2, 2018 by rod mcq typing error 1 1 Link to comment Share on other sites More sharing options...
VMA131Marine Posted October 2, 2018 Share Posted October 2, 2018 1 hour ago, rod mcq said: The UK RRP for the Spitfire will be £34.99 with the kit currently due in mid-January 2109 Just in time for the 170th anniversary of the start of WWII! 4 Link to comment Share on other sites More sharing options...
rod mcq Posted October 2, 2018 Share Posted October 2, 2018 17 minutes ago, VMA131Marine said: Just in time for the 170th anniversary of the start of WWII! Oops - one day I will learn to type 1 Link to comment Share on other sites More sharing options...
fightersweep Posted October 2, 2018 Share Posted October 2, 2018 9 hours ago, Homebee said: Some more interesting pictures. Source: http://www.tamiya.com/japan/newstopics/2018/0928newitem/index.html Looks rather nice! Got to say that the pilot figure looks very good. I keep looking at the photo and it actually looks like a real person sitting in there....well, unless they've photoshopped a real pilot into the cockpit! Just hoping Tamiya bring us a Mk 1 in 1/32 too! Steve 1 Link to comment Share on other sites More sharing options...
JackG Posted October 3, 2018 Share Posted October 3, 2018 Found a blog with a few more photos: http://lstfazz.blogspot.com/ regards, Jack 6 Link to comment Share on other sites More sharing options...
Mike Esposito Posted October 3, 2018 Share Posted October 3, 2018 That pilot figure is awesome! Link to comment Share on other sites More sharing options...
Boman Posted October 3, 2018 Share Posted October 3, 2018 Yes it is, just wished they'd make the head with the oxygen mask like they do in 1/32 😣 Link to comment Share on other sites More sharing options...
Sturmovik Posted October 3, 2018 Share Posted October 3, 2018 I see some of the photoetch parts are for the radiators and the seat belts, I hope the other parts can be left aside without much trouble, I don´t like photoetch. Link to comment Share on other sites More sharing options...
Chaotic Mike Posted October 4, 2018 Share Posted October 4, 2018 But... But... But... The seat is the wrong colour! Clearly it's unbuilable! 3 Link to comment Share on other sites More sharing options...
fightersweep Posted October 4, 2018 Share Posted October 4, 2018 55 minutes ago, Chaotic Mike said: But... But... But... The seat is the wrong colour! Clearly it's unbuilable! It's the right colour for an early Spit. These had metal seats and were painted green. It's ok, you'll be able to build it. Edgar wrote a fair bit about this. Can't remember off of the top of my head, but I think he said that the composite seats started being fitted from May 1940 onwards (needs checked). Either way, I probably painted most of my Battle of Britain era Spitfire seats wrong! Steve 1 Link to comment Share on other sites More sharing options...
gingerbob Posted October 4, 2018 Share Posted October 4, 2018 18 hours ago, JackG said: OK, very minor grumble. Why oh why make a separate control surface (rudder) and then attach it with a great big tab that locks it in one position? That just bugs me. 1 Link to comment Share on other sites More sharing options...
Masinissa Posted October 4, 2018 Share Posted October 4, 2018 44 minutes ago, gingerbob said: OK, very minor grumble. Why oh why make a separate control surface (rudder) and then attach it with a great big tab that locks it in one position? That just bugs me. Yes it's a pain, but they do this so the control surfaces have a three dimensional look to them. They look seperate from the wing or tail. I usually sand the tab or cut it down so I can position it the way I want. Just did that with the tail planes on Eduard's Fw-190A-3 kit. The Aftermarket companies - CMK, Quickboost, Eduard - make resin control surfaces, but they need to be modified if you want to animate your build. Link to comment Share on other sites More sharing options...
DominikS Posted October 4, 2018 Share Posted October 4, 2018 I only don't like that there aren't early Rotol and two-blader (Watts?) propellers and early, flat canopy. Another thing which is quite interesting is the way we should attach armour glass. Link to comment Share on other sites More sharing options...
janneman36 Posted October 4, 2018 Share Posted October 4, 2018 44 minutes ago, DominikS said: I only don't like that there aren't early Rotol and two-blader (Watts?) propellers and early, flat canopy. Another thing which is quite interesting is the way we should attach armour glass. That is really a missed chance, if it would i would immediately buy it... Nevertheless it looks like a great kit... Cheers, Jan Link to comment Share on other sites More sharing options...
Graham Boak Posted October 4, 2018 Share Posted October 4, 2018 What do you mean by early Rotol? One squadron was fitted with magnesium-bladed Rotol props around the time of Dunkirk, but I've not seen drawings of these, nor of the spinner shape. They were narrower than the later standard wooden Rotol blades. If you mean the classic Spitfire Rotol almost-hemispherical spinner, then this was standard on the Castle Bromwich build Mk.IIs whereas the Mk. Is were Supermarine built with the De Havilland prop and spinner. There were some Mk.Is with the Rotol spinner and wooden props, as the two were interchangeable, but they were certainly not common. But this isn't a kit of a Mk.II. Or a cannon-armed Mk.I. Nor does it include parts for the PR versions. It's a kit of a Mk.I offering a range of options. Modellers are never content. 4 Link to comment Share on other sites More sharing options...
DominikS Posted October 4, 2018 Share Posted October 4, 2018 Graham, I meant Rotol used on No 54 squadron Spitfires. To my blind eyes it's the same type as used later on Spitfires Mk.II. I didn't know about any other Rotol propellers used on Mk. I. It is good to learn something new about Spits. Link to comment Share on other sites More sharing options...
NPL Posted October 6, 2018 Share Posted October 6, 2018 B een away for some time ... but I guess that Tamiya has decided to produce the definitive Spitfire Mk.I -- again again. But strange omissions such as the two blade propeller as it seems that a few items belonging to the very early Spifires are present. But very nice t see two new Spitfire in 1/48 appearing over the next six months (or less). The last two years have been like in a desert. Link to comment Share on other sites More sharing options...
IanC Posted October 6, 2018 Share Posted October 6, 2018 On 10/3/2018 at 5:53 PM, Mike Esposito said: That pilot figure is awesome! He is. As painted, the blue of his service dress uniform is a bit bright but it's a hard colour to get right. The kit looks absolutely fantastic and I will definitely be buying one, even though it's the 'wrong' scale. Link to comment Share on other sites More sharing options...
Sturmovik Posted October 6, 2018 Share Posted October 6, 2018 8 hours ago, NPL said: B een away for some time ... but I guess that Tamiya has decided to produce the definitive Spitfire Mk.I -- again again. But strange omissions such as the two blade propeller as it seems that a few items belonging to the very early Spifires are present. But very nice t see two new Spitfire in 1/48 appearing over the next six months (or less). The last two years have been like in a desert. Maybe Tamiya plans to release the two bladed version after this one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now