Scooby Posted September 30, 2018 Share Posted September 30, 2018 19 hours ago, JackG said: At the moment there is no reason to suspect this new tool has shape issues. As for the experts on the original Tamiya release of '93, that is up to them why they never mentioned it. Maybe some didn't notice, others kept quiet to not affect sales?? regards, Jack It was mentioned, I have several old magazine articles that clearly note the errors. Link to comment Share on other sites More sharing options...
Scooby Posted September 30, 2018 Share Posted September 30, 2018 I bit the bullet today and pre-ordered a kit from Hobby Easy. Hopefully I have it in time for Christmas! Link to comment Share on other sites More sharing options...
Col. Posted September 30, 2018 Share Posted September 30, 2018 2 hours ago, Plasto said: I’m personally now in a quandary as I have a ‘old’ Tamiya mk1 spitfire about 20% finished.. Do I push on or wait for the new kit? Finish it. That, after all, is what kits are made for 4 Link to comment Share on other sites More sharing options...
Tbolt Posted September 30, 2018 Share Posted September 30, 2018 2 minutes ago, Col. said: Finish it. That, after all, is what kits are made for Agree, it's not like it's a really bad kit. I'll still be building the Tamiya and Hasegawa Mk.V's in my stash dispite them not being as accurate as the latest kits. 3 Link to comment Share on other sites More sharing options...
Plasto Posted October 1, 2018 Share Posted October 1, 2018 2 hours ago, Col. said: Finish it. That, after all, is what kits are made for Sage advice.... I may finish it as one of these... 2 Link to comment Share on other sites More sharing options...
Col. Posted October 1, 2018 Share Posted October 1, 2018 That would be rather nice @Plasto Link to comment Share on other sites More sharing options...
Biggles87 Posted October 1, 2018 Share Posted October 1, 2018 I agree that the shape looks better than the old Mk I, but from what I can see of the sprues there doesn't appear to be a flat sided canopy or two bladed propeller for an early Mk 1. John Link to comment Share on other sites More sharing options...
Scimitar F1 Posted October 1, 2018 Share Posted October 1, 2018 Looking forward to this one. I cannot quite believe it is 24 years since the last one was released (and it is 22 years since I built it)! Link to comment Share on other sites More sharing options...
Vonbraun Posted October 1, 2018 Share Posted October 1, 2018 19 hours ago, lasermonkey said: IIRC, that mirror type was introduced on R6799*. I'll have to dig out the old SAM article on early Spitfires, as it's a goldmine of information on the subject. Edit: it (being the first production-fitted mirror) was introduced on R6800-6803 and R6880 onwards according to the SAM November 1982 article. Cheers, Mark. Mark, thanks so much for posting the link to that wonderful SAM article. Rob Link to comment Share on other sites More sharing options...
silberpferd Posted October 1, 2018 Share Posted October 1, 2018 9 hours ago, Vonbraun said: Mark, thanks so much for posting the link to that wonderful SAM article. Rob +1 👍 Link to comment Share on other sites More sharing options...
Tbolt Posted October 1, 2018 Share Posted October 1, 2018 On 9/30/2018 at 8:25 AM, Sonoran said: What I find interesting is that every piece that goes into assembling the wings is contained on a separate sprue, which means we could see a Mk.Vb/c with a simple change of sprue. Additionally, the lower cowling is molded on a gated sub-sprue off one end of one of the other main sprues, with nothing on the opposite end where a gate is closed. That tells me that a Vokes filter on that gated off area is in the offing, again pointing to a Mk.Vb/c. And hopefully a pilot in his shorts 1 Link to comment Share on other sites More sharing options...
fightersweep Posted October 1, 2018 Share Posted October 1, 2018 On 9/30/2018 at 1:17 PM, lasermonkey said: IIRC, that mirror type was introduced on R6799*. I'll have to dig out the old SAM article on early Spitfires, as it's a goldmine of information on the subject. Edit: it (being the first production-fitted mirror) was introduced on R6800-6803 and R6880 onwards according to the SAM November 1982 article. Cheers, Mark. I've got a copy of that November 82 SAM on my book shelf. You're right! It is a veritable goldmine. Fantastic article and usually one of my first go-to's for early Spitfire stuff. Steve Link to comment Share on other sites More sharing options...
Admiral Puff Posted October 1, 2018 Share Posted October 1, 2018 If they do a Mk V, let's hope it's a Vc - we have more than enough Vbs, thank you! 3 Link to comment Share on other sites More sharing options...
Homebee Posted October 2, 2018 Share Posted October 2, 2018 (edited) Some more interesting pictures. Source: http://www.tamiya.com/japan/newstopics/2018/0928newitem/index.html V.P. Edited October 2, 2018 by Homebee 2 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted October 2, 2018 Share Posted October 2, 2018 Looks nice, however I'm not a huge fan of the seperate wingtips for the Mk.1 version. I'm trying to work out why they've done this as the original 1993 kit has a complete wing with no separate wingtips. 610 Squadrons DW-K gets another showing and I'll reserve judgement on the Red used for the national insignias. Big pluses for the range of windscreens and everything else. I'm sure it'll all fit like a well worn glove. Cheers.. Dave 1 Link to comment Share on other sites More sharing options...
Troy Smith Posted October 2, 2018 Share Posted October 2, 2018 8 minutes ago, Rabbit Leader said: Looks nice, however I'm not a huge fan of the seperate wingtips for the Mk.1 version. I'm trying to work out why they've done this as the original 1993 kit has a complete wing with no separate wingtips. from the above Dave, note that the wingtips are on a separate 'detail' sprue, so this is to cater for the inevitable Mk.Vb, to usual howls of "why no Vc..." Perhaps well see though we'll see "Tamiya XF-86" RAF Dark Earth appear in the paint range now though.... 1 Link to comment Share on other sites More sharing options...
vppelt68 Posted October 2, 2018 Share Posted October 2, 2018 1 minute ago, Troy Smith said: ...for the inevitable Mk.Vb, to usual howls of "why no Vc..." I know next to nothing about Spitfires, but doesn´t the Mk.I share identical main landing gear assembly with Mk.Vb, where as that would be inaccurate and a "fatal flaw" in a Mk.Vc? Maybe that´s why the manufacturers (those that respect accuracy better than others) take the shortcut and produce them Vb:s... V-P Link to comment Share on other sites More sharing options...
Troy Smith Posted October 2, 2018 Share Posted October 2, 2018 Just now, vppelt68 said: I know next to nothing about Spitfires, but doesn´t the Mk.I share identical main landing gear assembly with Mk.Vb, where as that would be inaccurate and a "fatal flaw" in a Mk.Vc? Maybe that´s why the manufacturers (those that respect accuracy better than others) take the shortcut and produce them Vb:s... V-P yes, the Vc has a forward rake compared to Vb, but when tooling up the Vc wing you just modify the UC leg attachment, as you need a new wing sprue anyway.... On 5/9/2014 at 14:36, Troy Smith said: the C wing introduced a 2 degree [iirc] forward rake to UC geometry. VB VC Foward rake is obvious. I can't recall the exact reasons, bob will though Tony, if this clutters your thread will happily edit out. HTH T from https://www.britmodeller.com/forums/index.php?/topic/234966915-alley-cat-spitfire-mkvc-conversion-for-new-airfix-spit-mkvb-kit-148th-scale/ 1 Link to comment Share on other sites More sharing options...
vppelt68 Posted October 2, 2018 Share Posted October 2, 2018 Thanks Troy. V-P Link to comment Share on other sites More sharing options...
Rabbit Leader Posted October 2, 2018 Share Posted October 2, 2018 19 minutes ago, Troy Smith said: from the above Dave, note that the wingtips are on a separate 'detail' sprue, so this is to cater for the inevitable Mk.Vb, to usual howls of "why no Vc..." Perhaps well see though we'll see "Tamiya XF-86" RAF Dark Earth appear in the paint range now though.... Thanks Troy, I can see the seperate wingtips on the other sprue, however if we just concentrate on the wing sprues, this is clearly catered for an 'A' eight gun wing. I'm not aware of this wing / gun arrangement ever being fitted with either clipped of HF wingtips, so why separate them? The wing parts shown above cannot be used for a Vb, Vc or anything else IMO (except Va). Having said all this, I am confident that the fit will be exceptional so there's probably no need for concern. I'm just a little curious and am certainly not bagging this kit. Cheers.. Dave Link to comment Share on other sites More sharing options...
Biggles87 Posted October 2, 2018 Share Posted October 2, 2018 OK I can now see what appears to ba a flat sided canopy, early unarmoured windscreen and ' pole ' type aerial but I still can't see a two bladed prop. Oh well never mind, I've got a resn one somewhere in my Spitfire spares box. It looks very tempting, I hope they don't spoil it all with a silly price. John Link to comment Share on other sites More sharing options...
Troy Smith Posted October 2, 2018 Share Posted October 2, 2018 1 hour ago, Rabbit Leader said: Thanks Troy, I can see the seperate wingtips on the other sprue, however if we just concentrate on the wing sprues, this is clearly catered for an 'A' eight gun wing. I'm not aware of this wing / gun arrangement ever being fitted with either clipped of HF wingtips, so why separate them? The wing parts shown above cannot be used for a Vb, Vc or anything else IMO (except Va). Having said all this, I am confident that the fit will be exceptional so there's probably no need for concern. I'm just a little curious and am certainly not bagging this kit. Cheers.. Dave Which is what I thought... I was just making a suggestion as to why, but logically you'd mould them inplace.... but maybe since they had the separate tips.... Tamiya march their own beat..... # 1 hour ago, Biggles87 said: OK I can now see what appears to ba a flat sided canopy, early unarmoured windscreen and ' pole ' type aerial but I still can't see a two bladed prop. Oh well never mind, I've got a resn one somewhere in my Spitfire spares box. It looks very tempting, I hope they don't spoil it all with a silly price. and this was an option in the new tool Airfix, so plenty of them about in spares boxes.... But I suspect the price maybe one that will not make for multiple purchases. The ki-61 and bf109G-6 are £39.99 at Hannants.... I image that what this will be as well.... 1 Link to comment Share on other sites More sharing options...
spaddad Posted October 2, 2018 Share Posted October 2, 2018 1 hour ago, Biggles87 said: It looks very tempting, I hope they don't spoil it all with a silly price. John Instead of putting it out at £19.99 like the bulk of their current single engine fighters & undercutting & outselling Airfix it'll probably be £35 or £40 like their latest issues. 1 Link to comment Share on other sites More sharing options...
Tbolt Posted October 2, 2018 Share Posted October 2, 2018 (edited) 2 hours ago, Rabbit Leader said: Thanks Troy, I can see the seperate wingtips on the other sprue, however if we just concentrate on the wing sprues, this is clearly catered for an 'A' eight gun wing. I'm not aware of this wing / gun arrangement ever being fitted with either clipped of HF wingtips, so why separate them? The wing parts shown above cannot be used for a Vb, Vc or anything else IMO (except Va). Having said all this, I am confident that the fit will be exceptional so there's probably no need for concern. I'm just a little curious and am certainly not bagging this kit. Cheers.. Dave Have they just molded the tips separately to get them accuarate rather than mould them with the top of the wing, I’m not sure why though? Edited October 2, 2018 by Tbolt 1 Link to comment Share on other sites More sharing options...
mhaselden Posted October 2, 2018 Share Posted October 2, 2018 Not sure I like the design of the fuselage pieces. I suspect the more ham-fisted among us (looking at myself in the mirror here!) may struggle to align the separate cockpit surround with the rest of the fuselage. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now