Mikey-1980 Posted October 24, 2018 Author Share Posted October 24, 2018 I had a good poke around the interwebs too and found this example of XH134 fromaround the same period of 39 Squadron, and can confirm that during this transition period, the large serials were used, Johns example of XH134 and this one of XH131 both deffinately have the serials underneath. Credit for the image: Registration: XH131 Construction Number: SH1721 Military Unit: 39 Squadron Model English Electric Canberra PR.9 Operator: Royal Air Force Airport: Eggebek (ETME), Germany Photographer: Jack Poelstra Date Taken: 02/06/1980 It would seem my mistake of adding the roundals was a slight cock up on my part. 4 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted October 26, 2018 Author Share Posted October 26, 2018 Small update.... Upper fuselage decals and line work completed......a little concerend that there is a lot of silvering with the decals though? DSC_1802 And now for the large serial number applied....I think they are straight? Again these are the Xtradecals that wrinkled like a a prune thats been out in the sun too long.....thanksfully they settled down over night. But still lots of silvering when dried......hmmm DSC_1801 More to come..... 4 Link to comment Share on other sites More sharing options...
canberra kid Posted October 26, 2018 Share Posted October 26, 2018 She's looking good Mikey, so havd you thought about your next Canberra yet? 😉 John 1 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted October 26, 2018 Author Share Posted October 26, 2018 haha!! I have been thinking bout it, but I have a few ideas in mind......one of which is a tribute build. I was looking through UK Serials for info on XH165, and I found myself looking at the losses page, specifically 1980.....there is an entry dated October 14th 1980, RAF Gütersloh 3 Squadron and a Harrier GR.3...1 month before I anounced my arrival into this world at RAF Gütersloh. Thanks to my parents swearing removed Han's bar one night in February 1980, and I was the result...haha!! bet they regret it now!?! http://www.ukserials.com/ 14/10/1980 - XV792 AN -Harrier GR3 3 Sqn - Crashed after a technical defect while in a hover at Gutersloh, West Germany. The pilot ejected but was killed. The MOD report - http://www.ukserials.com/pdflosses/maas_19801014_xv792.pdf https://aviation-safety.net/wikibase/wiki.php?id=55562 My thoughts is building a 1/48 Harrier GR3 in XV792 markings in a hovered position? As a tribute to the brave pilot who tragically lost his life 1 month before my birth. I may mention it to my dad later on and see if he remembers the incident? This is the Harrier in question prior to the accident 3 Link to comment Share on other sites More sharing options...
SA80A2AR Posted October 26, 2018 Share Posted October 26, 2018 looking propper pukka Link to comment Share on other sites More sharing options...
Diggers11 Posted November 1, 2018 Share Posted November 1, 2018 Hi Mikey, Wow this build has progressed a lot since I last checked in. Its now painted and decaled! You have already got your next project lined up I see. I finally finished my Revell Hawk and posted it in the "Ready for Inspection" section. I don't know how it took me so long. Mark. 1 Link to comment Share on other sites More sharing options...
bar side Posted November 1, 2018 Share Posted November 1, 2018 Your 165 is looking good there. Do like them especially in grey green. So not put off & going for another Airfix then? Think it is still the only way way option for a 1/48 GR3. Not entirely convinced by the cockpit size but it looks like a Harrier There is plenty of useful Harrier stuff at http://www.harriersig.org.uk/index.htm 4 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted November 1, 2018 Author Share Posted November 1, 2018 1 hour ago, Diggers11 said: Hi Mikey, Wow this build has progressed a lot since I last checked in. Its now painted and decaled! You have already got your next project lined up I see. I finally finished my Revell Hawk and posted it in the "Ready for Inspection" section. I don't know how it took me so long. Mark. It's almost there, still a way to go for the rest of the decals. Do a bit, let it dry, d a bit more. I'll check out your Hawk build too, I'm sure it turned out a peach too? Not sure on the next build yet, as I have a meteor in the stash too. The Harrier is a definite contender as my was on duty when the accident happened and remembers it well. 7 minutes ago, bar side said: Your 165 is looking good there. Do like them especially in grey green. So not put off & going for another Airfix then? Think it is still the only way way option for a 1/48 GR3. Not entirely convinced by the cockpit size but it looks like a Harrier There is plenty of useful Harrier stuff at http://www.harriersig.org.uk/index.htm Awesome build there chap! Need to find a 1/48 that's at the right price. Thanks for the link as well. Will definitely come in handy. 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted November 1, 2018 Share Posted November 1, 2018 @Mikey-1980 there's a couple of 1/48 Harriers on ebay right now, if you're interested ... https://www.ebay.co.uk/itm/Airfix-BAe-Harrier-GR-3-Model-Aircraft/253955881272?hash=item3b20f33938:g:mjcAAOSwFzZb1spw https://www.ebay.co.uk/itm/AIRFIX-BAe-HARRIER-GR3-1-48th-SCALE-SERIES-5-MODEL-05102/183511402432?epid=1407936772&hash=item2aba21c7c0:g:FcoAAOSwDDRb2KNM Now I've finished the Hawk my next kit will be the 1/48 Harrier too. 1 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted November 1, 2018 Author Share Posted November 1, 2018 They're great! Cheers @Lord Riot 1 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted November 12, 2018 Author Share Posted November 12, 2018 Saddly I dodn't wint the GR.3 Harrier @Lord Riot , I was sniped by 50p at the very last second...ah well.. there will be other opotunities. Slight updaye on th Canberra though with the decaling not pretty much done. Tricky in places, especially around the nose and the "place tressel here" decals that were really difficult to see on the instructions. However,m I hope the efforts have paid off.... DSC_1829 DSC_1830 DSC_1831 DSC_1832 One very busy looking front end DSC_1834 I have trialed Humrols clear gloss lacquer on the flaps, forgetting that I actually needed to place the Canberra's serial number on the front undercarriage. Oops! Should be ok. the trial of the lacquer went ok I think? a little bit f pools started as the flaps were upright instead of being flat, but I managed to save them I think? I'm a little bit apprehensive about using the lacquer on the Canberra itself, but I think it will be ok with just one coat of gloss lacquer. Rather than spraying it on like I would with paint, I'll do a misting application to try and get an even finish. top half first, let it dry, and then the loer half. Also in the middle of exchanging contracts on my new home, so there may not be many more updates for the Canberra until the new work bench is back up and running. I foresee many trips to Hades AKA....IKEA..... 6 Link to comment Share on other sites More sharing options...
rob Lyttle Posted November 12, 2018 Share Posted November 12, 2018 1 hour ago, Mikey-1980 said: I foresee many trips to Hades AKA....IKEA..... What.... have they started selling aeroplane kits?? 😁 After doing a Canberra, building their stuff should be a breeze. Good luck with the move 1 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted November 12, 2018 Author Share Posted November 12, 2018 I wish they did, haha!! closest I may get is a new display cabbinet for the kits I am planning to build....I also get the question we all have had from our significant others..."where are you going to put it when its done?" Errrrr....... Cheers Rob, hopefully it will go smoothly...oddly I quite like making flat packs, and so does my other half too. building them will be a breeze after this kit. all great fun though 1 Link to comment Share on other sites More sharing options...
Haggis9444 Posted November 12, 2018 Share Posted November 12, 2018 Very nice work... Keep the Canberras coming... 6 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted November 12, 2018 Author Share Posted November 12, 2018 Spectactular collection of Canberra's there chap! Link to comment Share on other sites More sharing options...
Mikey-1980 Posted November 19, 2018 Author Share Posted November 19, 2018 (edited) Small update. Looks like the work bench is being mothballed for the time being. The completion date on the new (ish) home is hopefully going to be within the next 10 days or so. Fingers crossed Careful packing of all my kit and models will now take priority. Fear not...the workbench will be back up and running ASAP and hopefully the completion of the PR.9 as it's about 80% now. I'll still be floating around the forums keeping an eye on everyones spectacular builds Edited November 19, 2018 by Mikey-1980 2 Link to comment Share on other sites More sharing options...
canberra kid Posted November 24, 2018 Share Posted November 24, 2018 On 11/19/2018 at 10:01 AM, Mikey-1980 said: Small update. Looks like the work bench is being mothballed for the time being. The completion date on the new (ish) home is hopefully going to be within the next 10 days or so. Fingers crossed Careful packing of all my kit and models will now take priority. Fear not...the workbench will be back up and running ASAP and hopefully the completion of the PR.9 as it's about 80% now. I'll still be floating around the forums keeping an eye on everyones spectacular builds Good luck with the move Mikey! Not far from the finish line now on the Canberra, keep up the good work! John Link to comment Share on other sites More sharing options...
Mikey-1980 Posted November 24, 2018 Author Share Posted November 24, 2018 Cheers John, All being well we'll have the keys next week. Bench is packed up and ready to go. 1 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted January 30, 2019 Author Share Posted January 30, 2019 Just to give my thread a little bump, but the Canberra is still on the book for completion. A small issue of moving home and restoring a 1935 stairwell bannister first. I am almost there with the build, just undercarriage, semi-gloss finish and some minor weathering to complete. 1 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted February 7, 2019 Author Share Posted February 7, 2019 Right then...it's been far too long for an up date on the Canberra, so I've managed to squeeze in a bit of bench time. First thing to do was to dust off the inch layer thick of duct that had accumulated on the old bird. The lean-to on the new house has already proven to be a makeshift paint booth. Armed with Tamiya's TS-13 clear semi-gloss. DSC_1932 DSC_1933 So far I'm impressed by the application of the TS-13. It has dried incredibly quickly. the lower half of the fuselage is drying as I type. Flaps are coated too and are drying. Hopefully I may get the under carriage done over the weekend or at least before I head of Johannesburg with work for a few days. Incidentally there is the South African Air Force museum in Pretoria I'm going to try to get to whilst I am there. Apparently there is a Canberra there too. https://saafmuseum.org.za/english-electric-canberra/ Hopefully more to follow in the coming days to finish the PR.9 5 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted February 8, 2019 Author Share Posted February 8, 2019 So the TS-13 clear coat dried pretty quickly, not everywhere as the port wing underside now has mu grubby fingerprint on it....but you can barely see it. And now the moment you've all been waiting for.......the big reveal......masking tape.......OFF! DSC_1936 A closer pic of the office seat...I am a bit disappointed with the navigators bang seat markings bubbling slightly...though I think this was because I applied the decal before the paint dried thoroughly. Plus the inordinate amount of filling, sanding, more filling and sanding has left an orange peal effect behind the cockpit DSC_1937 The underside is looking great too with the camera bays now revealed. DSC_1934 A closer pic of the camera bay...quite happy with the scratch build main camera. At first glance it looks pretty decent I think? DSC_1935 Next to be done will to sort out the undercarriage when I can. Hopefully sooner rather than later. Also, if anyone has any tips on spru stretching to make the radio cables would be greatly appriciated. On a side note, this was my other build whilst sorted out the work bench and the house. Lego's Saturn V rocket....1969 peices and stands 1 meter tall. DSC_1939 4 Link to comment Share on other sites More sharing options...
Ex-FAAWAFU Posted February 8, 2019 Share Posted February 8, 2019 @Mikey-1980 are you still looking for a 1/48 Airfix GR3? If so I have one you’re welcome to if you pay for the postage. Link to comment Share on other sites More sharing options...
Mikey-1980 Posted February 8, 2019 Author Share Posted February 8, 2019 Hi @Ex-FAAWAFU I am indeed, Thank you I would happily give you some cash for the kit as well as the postage. which airfix kit is it please? Link to comment Share on other sites More sharing options...
exdraken Posted February 8, 2019 Share Posted February 8, 2019 Nice results so far ! The Saturn is also mighty impressive! 1 Link to comment Share on other sites More sharing options...
Mikey-1980 Posted February 8, 2019 Author Share Posted February 8, 2019 cheers @exdraken The Saturn V was a really fun build too. Still not sure what to do with it haha! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now