BIG X Posted June 10, 2018 Author Share Posted June 10, 2018 Whilst the internet was down I built frames for the signs... They are too tall at present, but the 60 degree angle is right - so I can cut them down later, along with the bridge disc poles - once I have a diorama sorted. This is some way off though - as I need to build my other entries first. 9 Link to comment Share on other sites More sharing options...
BIG X Posted June 10, 2018 Author Share Posted June 10, 2018 Now I like them in white - but as I had not internet most of the afternoon I decided to pain them - primer first... Then some 'wood' and some staining... Then a bit of cleaning up - not sure if I like the result though... Maybe it will grow on me - I wonder if I could 'white wash' them by dry brushing 10 Link to comment Share on other sites More sharing options...
BIG X Posted June 10, 2018 Author Share Posted June 10, 2018 Now as this bridge was built by the 10th Bridging troop - see below - bottom of column 4... ...and most of the bridges pictured earlier show divisional emblems and arms of service badges - I thought it best to logo the signs up for them... So - I think I have reached as far as I can go for now... ...oh - don't worry about the lip of the bridge - it will be sunk into the dirt by the side of the canal - when I finally get there. 16 Link to comment Share on other sites More sharing options...
badger Posted June 10, 2018 Share Posted June 10, 2018 This just keeps getting better! Fantastic attention to detail - I'd have missed the unit signs on the bridge sign. From what was a very humble starting point this has turned into a fantastically good build! All the best Ben 1 1 Link to comment Share on other sites More sharing options...
BIG X Posted June 10, 2018 Author Share Posted June 10, 2018 @badger ...now you know where that ready mix polyfilla is going to get used... 2 Link to comment Share on other sites More sharing options...
badger Posted June 10, 2018 Share Posted June 10, 2018 Just had a thought (I know - dangerous!), if you are wanting to build a canal bank then it might be worth trying to get hold of some pink or blue builders insulation foam as this can be easily cut, carved and sanded to shape before being covered in a skin of polyfilla. Far easier than using expanded polystyrene as I used to many years ago. All the best Ben 1 Link to comment Share on other sites More sharing options...
BIG X Posted June 10, 2018 Author Share Posted June 10, 2018 2 minutes ago, badger said: Just had a thought (I know - dangerous!), if you are wanting to build a canal bank then it might be worth trying to get hold of some pink or blue builders insulation foam as this can be easily cut, carved and sanded to shape before being covered in a skin of polyfilla. Far easier than using expanded polystyrene as I used to many years ago. All the best Ben Duly noted - it's still very much at the 'imagining stage'. I am having all kinds of weird and wonderful ideas - you watch though - it will end up looking really boring now I've said that... 1 1 Link to comment Share on other sites More sharing options...
badger Posted June 10, 2018 Share Posted June 10, 2018 1 minute ago, BIG X said: It will end up looking really boring now I've said that... 'Boring' in a Big X build - I highly doubt it! 1 Link to comment Share on other sites More sharing options...
BIG X Posted June 11, 2018 Author Share Posted June 11, 2018 This thread has now been legally 'parked'. There will be further progress in a few weeks time... ...if you need to contact the driver he is off building a church here... Thanks for looking in and see you back here in a few weeks - Steve 7 Link to comment Share on other sites More sharing options...
Andre B Posted June 11, 2018 Share Posted June 11, 2018 Roco also made a pontoon bridge with al parts as trucks, trailers and bridgelayers. Albeit not in 1/72 scale. But the pontoons looked ok... https://www.worthpoint.com/worthopedia/roco-196-ho-minitanks-army-pontoon-154787885 Cheers / André 1 Link to comment Share on other sites More sharing options...
the South African Posted June 11, 2018 Share Posted June 11, 2018 I'm hoping it is a very quick church.LOL The bridge is looking spectacular mate. Regards: Shaun 1 Link to comment Share on other sites More sharing options...
Ozzy Posted June 11, 2018 Share Posted June 11, 2018 Fantastic job on the bridge Steve and the sign looks the business, looking forward to the Church. 1 Link to comment Share on other sites More sharing options...
Teuchter Posted June 11, 2018 Share Posted June 11, 2018 I once worked with an ex-RE who was missing a bit of forefinger on each hand. 'Well, we were assembling a Bailey Bridge and I didn't have a tool to check if this bolt hole was clear and it shifted..... ' and the other hand? 'Well, the next year, I had to use my left hand ....' was this the military health and safety referred to earlier? 4 Link to comment Share on other sites More sharing options...
Lawzer Posted June 11, 2018 Share Posted June 11, 2018 23 minutes ago, Teuchter said: I once worked with an ex-RE who was missing a bit of forefinger on each hand. 'Well, we were assembling a Bailey Bridge and I didn't have a tool to check if this bolt hole was clear and it shifted..... ' and the other hand? 'Well, the next year, I had to use my left hand ....' was this the military health and safety referred to earlier? Ooyah! 1 Link to comment Share on other sites More sharing options...
BIG X Posted June 11, 2018 Author Share Posted June 11, 2018 I used to know a guy who lad lost almost all his fingers in an industrial bread slicer of all things - famous comment from Mrs X 'he would never get a job as a milkman would he' - it took me an hour to get the joke - then LMAO... 1 3 Link to comment Share on other sites More sharing options...
BIG X Posted June 16, 2018 Author Share Posted June 16, 2018 I have a quick question - if I may... I am hoping to have my pontoon slung across a canal. My problem is - I have never done 'water' and the few YouTube videos I have seen seem to involve a real liquid - which sets solid. That would permanently trap my bridge - which I'm not keen on happening. Does anyone have any bright ideas... Thanks in advance - Steve Link to comment Share on other sites More sharing options...
Richard E Posted June 16, 2018 Share Posted June 16, 2018 7 minutes ago, BIG X said: I have a quick question - if I may... I am hoping to have my pontoon slung across a canal. My problem is - I have never done 'water' and the few YouTube videos I have seen seem to involve a real liquid - which sets solid. That would permanently trap my bridge - which I'm not keen on happening. Does anyone have any bright ideas... Thanks in advance - Steve Would any of the techniques that the model ship builders use to represent seascapes be a possible alternative ? 1 Link to comment Share on other sites More sharing options...
BIG X Posted June 16, 2018 Author Share Posted June 16, 2018 Just now, Richard E said: Would any of the techniques that the model ship builders use to represent seascapes be a possible alternative ? Hey Richard - It's a good point - but they all seem to involve moving water and bough waves / wakes etc. My canal would be 'fairly' still. There certainly wouldn't be 'flowing' water - maybe just a few 'ripples'. Link to comment Share on other sites More sharing options...
Kallisti Posted June 16, 2018 Share Posted June 16, 2018 When I built my Bailey bridge dio a few years ago I used a resin stuff that flowed when it was heated up and set hard when it was cool. Its called Woodland Scenics EZ water and you can see it in use here in my bridge dio from good lord 4 years ago!!! 3 Link to comment Share on other sites More sharing options...
BIG X Posted June 16, 2018 Author Share Posted June 16, 2018 4 minutes ago, Kallisti said: When I built my Bailey bridge dio a few years ago I used a resin stuff that flowed when it was heated up and set hard when it was cool. Its called Woodland Scenics EZ water and you can see it in use here in my bridge dio from good lord 4 years ago!!! ...that is RATHER IMPRESSIVE - what scale is it... Link to comment Share on other sites More sharing options...
Kallisti Posted June 17, 2018 Share Posted June 17, 2018 1:35 its the Bronco Bailey Bridge - well about 1/3rd of it, plus the Tamiya Cromwell, Tamiya BSA Motorbike plus some Figures from Tamiya British Infantry, and a French Farmer figure from a MiniArt British Paratroopers set along with pigs and piglets from the Tamiya animals set 1 Link to comment Share on other sites More sharing options...
BIG X Posted June 17, 2018 Author Share Posted June 17, 2018 1 minute ago, Kallisti said: 1:35 its the Bronco Bailey Bridge - well about 1/3rd of it, plus the Tamiya Cromwell, Tamiya BSA Motorbike plus some Figures from Tamiya British Infantry, and a French Farmer figure from a MiniArt British Paratroopers set along with pigs and piglets from the Tamiya animals set Well - it's simply BRILLIANT!!!!!! 1 Link to comment Share on other sites More sharing options...
Kallisti Posted June 17, 2018 Share Posted June 17, 2018 Thank you - I forgot to mention that it has a title... "Road Hogs" 1 Link to comment Share on other sites More sharing options...
Lawzer Posted June 18, 2018 Share Posted June 18, 2018 12 hours ago, Kallisti said: Thank you - I forgot to mention that it has a title... "Road Hogs" Like it!! 😂 Link to comment Share on other sites More sharing options...
BIG X Posted July 25, 2018 Author Share Posted July 25, 2018 Good evening folks, Today has been a 'lovely day' in more ways than one. I got my windmill finished, @Antb posted his superb Spitfire in the gallery and someone else passed me a brilliant bit of news. The sun is shining, I'm on holiday and all is well with the world. Well almost... I got into a discussion this morning about this bridge project and as I'm now at a loose end I thought it was a good time to come back and finish it. So as you may remember I left it with a special 'parking' permit... ...well I got back to it tonight and it's only been 'clamped'... ...and they want 100 quid to release it - it's madness As you can tell I'm in something of a 'jolly' mood - happy modelling folks 1 1 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now