Borisz Posted May 10, 2018 Share Posted May 10, 2018 (edited) Hello there! This is my recent project, a nice little prop. If someone dont know it by heart, here is a hint by a fellow modeller from the Britmodeller: Also, that build was seriously inspiring me, thats why I gave it to myself last year, as a birthday present. Anyway, it was discounted in a scalemodel shope in my near... So, I decided to finish it for my next birthday, 14 days remaining. Whish me luck! You can seen I culd not stand to build it out of the box. There is still a planty of works in the interrior, mostly painting jobs.but I also want to add a fire extingusher, and a first aid box. Edited May 10, 2018 by Borisz 1 Link to comment Share on other sites More sharing options...
Azgaron Posted May 10, 2018 Share Posted May 10, 2018 Nice! A bit unusual with a kit in clear plastic. Håkan Link to comment Share on other sites More sharing options...
Borisz Posted May 10, 2018 Author Share Posted May 10, 2018 36 minutes ago, Azgaron said: Nice! A bit unusual with a kit in clear plastic. Håkan Thank You! It unusual indeed. there are some speculations saying that because of moulding reasons; for better details on the surface but still no exact answer for years. 1 Link to comment Share on other sites More sharing options...
Borisz Posted June 9, 2018 Author Share Posted June 9, 2018 Hi! However I could not finish on time, I didnt give it up. Actually I had many away days In the last months. I strive for my best and because of this I spent days to find correct interrior shots about 0557 axactly as I noticed earlier that some of the Z-142 CLV's had a pink stipe inside while other ones blue. Please wellcome my progress. By the way since the photos are taken I started to make the curtains. Also the landing lights are polished properly after. This was the starting condition. 7 Link to comment Share on other sites More sharing options...
Cessna Posted June 9, 2018 Share Posted June 9, 2018 Good job! Great plane! Wait for your progress 1 Link to comment Share on other sites More sharing options...
spiton Posted June 9, 2018 Share Posted June 9, 2018 I like this plane very much !!! 1 Link to comment Share on other sites More sharing options...
Borisz Posted June 17, 2018 Author Share Posted June 17, 2018 (edited) I am glad to show you my recent progress. The airframe is most likely ready. Just a small sanding left and also a cup of gadgets like pitot tubes, steps. So what happend so far? I made an imitation for the engine an the air inlet. Not a big deal but makes much better that emptyness. Added as much weight as I cuold... ... and finally its aint sit down. Previusly the landing light looked like this: [ And this is now: [ I think it is clear enough. P1080413 Rails for the curtain: Ready for masking! The next step for me will be the sanding. Luckily not so much is needed. But I also have to paint it and this time I am a little unsure. I'll have to ad those littles as I mentioned above and I think I shuold do it before primeing. And some white aerials are still missing from the underside too. So I have a dilemma. I am afraid that if I spray the lighter light blue, I am going to demage the pitots and etc. I can spray the darker lightblue first, but I am unsure if the lighter one will cover it properly. What do You think? Edited June 17, 2018 by Borisz 6 Link to comment Share on other sites More sharing options...
Azgaron Posted June 17, 2018 Share Posted June 17, 2018 Nice work, and nice that it sits as it should! Håkan 1 Link to comment Share on other sites More sharing options...
Borisz Posted June 27, 2018 Author Share Posted June 27, 2018 (edited) Hi! I have some news for my audiance (...or visiance. Idk if its a real word.) So painting is going on. Comments, as always, wellcome. Edited June 27, 2018 by Borisz 7 Link to comment Share on other sites More sharing options...
Smudge Posted June 28, 2018 Share Posted June 28, 2018 Nice work. Unusual subject. Link to comment Share on other sites More sharing options...
Borisz Posted July 20, 2018 Author Share Posted July 20, 2018 Hi! Almost one month passed, and I totally forgot to post here. Well... The nose gear was to long, and the plane hold its nose so high as it'd sitting on the tail. See that piece that had to been removed from the middle. To keep up the structural strenght, I drilled both the remaining parts and inserted a copper wire as a tenon Of course I forgot to take a shot, 'cause i was busy with modelling.😵 Whats more here is the paintjob. And furthermore this week finally I managed to finish it. I commited everything to not finish it however, but I dont speak about it... Here you can see the complete thing 4 Link to comment Share on other sites More sharing options...
Azgaron Posted July 20, 2018 Share Posted July 20, 2018 Looks very nice! Well done! Håkan 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now