Radleigh Posted October 18, 2018 Share Posted October 18, 2018 4 hours ago, ho590hm said: Very tempted by this even though I have yet to finish the An-124 (and Tu-144 and Il-86) One concern from the rendering is the new centre section which seems a bit too deep. Most frontal shots on airliners.net seem to show a horizontal line between the new inboard engines. Perhaps its just the angle. Cheers Howard No 3D renderings have been posted, and they have quoted this "(Image bellow has only illustrating purpose, not to be considered as 3D render)" Link to comment Share on other sites More sharing options...
VMA131Marine Posted October 19, 2018 Share Posted October 19, 2018 Cool! Maybe a 1/72 A380 will be next. At least there are a lot more marking options. 1 Link to comment Share on other sites More sharing options...
Kevin Callahan Posted October 19, 2018 Share Posted October 19, 2018 Much as I'd love to have one in my display case, if only for the conversation factor, if I'm going to go deep into my wallet, the AModel Spruce Goose would still come first. Not that that is happening anytime soon, either.... 1 Link to comment Share on other sites More sharing options...
Kevin Callahan Posted October 19, 2018 Share Posted October 19, 2018 5 hours ago, VMA131Marine said: Cool! Maybe a 1/72 A380 will be next. At least there are a lot more marking options. Still need a (non-resin) 747 first! But I'd still require a visit to the cardiologist if Modelsvit announced an A380 in 1:72. Link to comment Share on other sites More sharing options...
Julien Posted February 25, 2019 Share Posted February 25, 2019 There Facebook today shows; Quote An-225 Mriya's project (1/72) under way. Release 2019!!! 1 1 Link to comment Share on other sites More sharing options...
Homebee Posted March 22, 2019 Author Share Posted March 22, 2019 First test shots. Source: https://www.facebook.com/modelsvit/posts/2314919438777094 V.P. 2 Link to comment Share on other sites More sharing options...
SeaVenom Posted March 22, 2019 Share Posted March 22, 2019 Didn't realise it was that far ahead. That'll be one big kit. Link to comment Share on other sites More sharing options...
foxbot Posted April 27, 2019 Share Posted April 27, 2019 Photos of kit: 6 Link to comment Share on other sites More sharing options...
Homebee Posted April 28, 2019 Author Share Posted April 28, 2019 Source: https://www.facebook.com/modelsvit/posts/2337537833181921 https://www.facebook.com/modelsvit/videos/379041379351643 V.P. 4 Link to comment Share on other sites More sharing options...
Robertone139 Posted April 28, 2019 Share Posted April 28, 2019 Mind boggling! 1 Link to comment Share on other sites More sharing options...
SeaVenom Posted April 30, 2019 Share Posted April 30, 2019 is the fuselage and wings plastic or fibreglass? It looks fibreglass in that phpto to me. Link to comment Share on other sites More sharing options...
Radleigh Posted April 30, 2019 Share Posted April 30, 2019 Fibreglass as per the An-124 and IL-86.. Link to comment Share on other sites More sharing options...
SeaVenom Posted May 2, 2019 Share Posted May 2, 2019 I must have got the wrong end of the stick but I was expecting an all plastic kit. Link to comment Share on other sites More sharing options...
Kevin Callahan Posted May 2, 2019 Share Posted May 2, 2019 Most of the superlarge AModel and Modelsvit kits have at least some fiberglass components. Link to comment Share on other sites More sharing options...
roginoz Posted May 2, 2019 Share Posted May 2, 2019 AModel's Beriev Be-200 has fibreglass fuz and wings. Great stuff to rescribe...........NOT ! Link to comment Share on other sites More sharing options...
Flankerman Posted May 2, 2019 Share Posted May 2, 2019 I thought they had no plans to do the MiG Ye-166??? Plus the M-55 parts look nice..... Oh! - and the An-225!!!!! Ken Link to comment Share on other sites More sharing options...
chris57 Posted May 2, 2019 Share Posted May 2, 2019 2 hours ago, Flankerman said: I thought they had no plans to do the MiG Ye-166??? Plus the M-55 parts look nice..... Oh! - and the An-225!!!!! Ken Try not to get to over excited Ken, you know what the doctor warned you. See you at Gloucester? Link to comment Share on other sites More sharing options...
Sturmovik Posted May 2, 2019 Share Posted May 2, 2019 In Trump's voice: "That kit is yuge." Link to comment Share on other sites More sharing options...
Homebee Posted May 10, 2019 Author Share Posted May 10, 2019 Source: https://www.facebook.com/modelsvit/photos/a.1859368940998815/2345967785672259/?type=3&theater Quote Hello friends, Following your discussion regarding our future release - An-225 Mriya (1/72), be advised that main production batch ( #7206 ) would not include fittings for Buran, however we shall release in very limited edition (up to 100 pcs) – special set (#7207), which shall consists of An-225 + separate box, having inside: Buran and related attachment fittings. V.P. 1 Link to comment Share on other sites More sharing options...
Mike Posted May 10, 2019 Share Posted May 10, 2019 Jinkeys! Link to comment Share on other sites More sharing options...
71chally Posted May 10, 2019 Share Posted May 10, 2019 Love the working undercarriage oleos, I've often wished for that in a kit. I guess in this case it will help to keep all those wheels flat on the deck. 1 Link to comment Share on other sites More sharing options...
Flankerman Posted May 10, 2019 Share Posted May 10, 2019 If it is anything like their An-124 (and I think it is) - there is no way that the accurate, to scale undercarriage will support the weight of the model. I made a support 'box' from clear perspex to support the weight - it's almost invisible unless you look for it.......... Ken 4 Link to comment Share on other sites More sharing options...
SeaVenom Posted May 10, 2019 Share Posted May 10, 2019 On 5/2/2019 at 6:25 AM, roginoz said: AModel's Beriev Be-200 has fibreglass fuz and wings. Great stuff to rescribe...........NOT ! Yes. I knew Amodel used fibreglass but not Modelsvit. Link to comment Share on other sites More sharing options...
Homebee Posted October 22, 2019 Author Share Posted October 22, 2019 Source: https://www.facebook.com/modelsvit/photos/a.1859368940998815/2467846370151066/ Quote Dear All, Herein would like to inform you that the release of An-225 "Mriya" (#7206, #7207)to be postponed for the end of Q1, 2020. The kit is already in production, however - manufacturing process of fiberglass parts ( wing, fuselage) takes more time and effords, as far as it is handmade. Official retail price shall be announced in the end of Jan/early Feb 2020. Thank you for your attention! V.P. 1 Link to comment Share on other sites More sharing options...
Nocoolname Posted October 22, 2019 Share Posted October 22, 2019 Just saw this added to the Hannants catalogue. It is mahooooooosive! Absolutely huuuaaaaaaaagggeee!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now