Artie Posted September 5, 2018 Share Posted September 5, 2018 (edited) Hi all...... Given the current mess with the shipments, I'd like to clarify some points: The kits ordered last may and june, have just been shipped. The kits ordered last july will be shipped throughout this month. We are meeting the previously announced delivery deadline of three months from the moment you place an order, with a slight delay of about two weeks. Not bad for a "three men army", working just on saturdays, when our family and job commintments allow us to do so.... Anyone bying any kit from us, is told about the purchase conditions, delivery terms, etc...It's clearly stated that the kits take about three months to be ready for shipment. When we announce a new kit in "preorder", we're talking about a kit still to be prepared, hence the lower price for the first 25 orders, as a way to compensate you for advancing the money needed to develop the model. Of course we're talking about an expensive kit, but if you take account about the cost of the raw materials, and the fact that the shipping fees are included in that price, you'll find it's not as expensive as some people think... Now the Scimitars are finally ready, some other kits have seen the light..... Hispano Aviación HA1112M4L, Buchón two seater, 1/48 scale. Ready for shipment. Hispano Aviación HA220D Super Saeta. 1/48 and 1/72 scale. Ready for shipment. Helwan Al Kaheera, 1/48 scale. Ready for shipment. Northrop N3PB, 1/48 scale. Already working with the master parts. Kit in "preorder" status. AISA I-15 Garrapata, 1/48 scale. Already working with the master parts, kit in "preorder" status. And probably, but still to be decided: Supermarine Swift FR.5, 1/48 scale. de Havilland Chipmunk, 1/48 scale. best regards.... Edited September 5, 2018 by Artie 3 Link to comment Share on other sites More sharing options...
chrisov Posted September 6, 2018 Share Posted September 6, 2018 Great news Artie. Think I was a July order so getting closer all the time. Keep up the good work. Thanks Chris Link to comment Share on other sites More sharing options...
huvut76g7gbbui7 Posted September 6, 2018 Share Posted September 6, 2018 Ah well..back to painting the garden fences as the postman has been and not delivered my escape clause 😀 Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 6, 2018 Share Posted September 6, 2018 Mine arrived today! Well, its certainly a heavy chunk of resin. Comes in a very sensible box which logically opens at the top. A very impressive kit but for a few caveats:- First, all the resin is in one bag. The wings and fuselage centre section are relatively massive. There is one casting that includes a solid resin canopy. On my kit one of the small parts on this had snapped in half and broken off. I suspect it was hit by a heavy chunk of something in transit so maybe the smaller part need additional protection or separate bagging? The damaged part can be repaired as the separate bit was in the bag. Second, the nose gear yoke was short shot due to air in one half of the mould so I will have to make the missing half. Third. I'm not sure about the font for the underwing serials? Fourth. Pictorial instructions and a page of A4 in Spanish. An English translation would have been useful Fifth. A parts map of some sort would also be useful. I have the Warpaint so the drawings in that should inform me as to what some of the bits are. This must sound very wingey but I am really very pleased with the kit and I'm glad that I have second one on order. It looks to be very buildable and the surface detail is very, very good! Simon 1 Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted September 6, 2018 Share Posted September 6, 2018 Mine has just arrived too. Parts in 2 bags. Nice to see 2 canopies. One main gear leg is short shot* on the axle, but an axle pin is easy enough. Some damage to one jet pipe, (an air bubble caused a void, but fixable by filling it with thin superglue). Some foam chips in the box to stop the contents rattling around would be useful. All in all, I'm happy with it. Excellent surface detail, and compared with another resin lump on my desk that cost more, and is half the size, this is 100 times better in quality. I don't have a solid resin canopy casting, not that I need it. *again an air bubble. The axle had detached in transit as the bubble was right at the angle. Juan has offered me spares already. Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 6, 2018 Share Posted September 6, 2018 3 hours ago, bentwaters81tfw said: Mine has just arrived too. Parts in 2 bags. Nice to see 2 canopies. One main gear leg is short shot* on the axle, but an axle pin is easy enough. Some damage to one jet pipe, (an air bubble caused a void, but fixable by filling it with thin superglue). Some foam chips in the box to stop the contents rattling around would be useful. All in all, I'm happy with it. Excellent surface detail, and compared with another resin lump on my desk that cost more, and is half the size, this is 100 times better in quality. I don't have a solid resin canopy casting, not that I need it. *again an air bubble. The axle had detatched in transit as the bubble was right it the angle. Juan has offered me spares already. I think you'll find the resin canopy as part of the large casting which includes the wing fences, etc. Looks like a Swift belly tank! Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted September 6, 2018 Share Posted September 6, 2018 No, my wing fences are separate. Obviously the moulds have been modified for simplicity. Link to comment Share on other sites More sharing options...
Simon Cornes Posted September 6, 2018 Share Posted September 6, 2018 Ah, mine are with another 7 or 8 castings all done in one piece. I think the bit that has snapped off is actually a main gear retraction jack so the part is okay. I have now rebagged all the smaller parts in separate bags so they won't be banging into the big bits! Really impressive kit though! Link to comment Share on other sites More sharing options...
jaw Posted September 6, 2018 Share Posted September 6, 2018 I received my Scimitar today as well and have had a look at it. I too have rebagged the smaller pieces into a separate bag. The decals are not wonderful but I will use either the MA ones of those from the Dynavector kit. And one of the mainwheel legs is not quite right, but not a major problem. If you speak Spanish I am sure that the instructions will be good but I don't and will have to rely on the pix as necessary. But when you appreciate this is the work of a small part time team, it is an incredible achievement. So well done and many thanks for producing a Scimitar in 1/48 scale. Now for a Swift FR5????? John 1 Link to comment Share on other sites More sharing options...
Artie Posted September 6, 2018 Share Posted September 6, 2018 Dear friends: thank you very much for your kind comments and input. We really appreciate them, that's the only way to improve things. Needless to say, any damaged part will be replaced free of charge. I'm asking Juan to offer a set of english instructions. Most of the Scimitars have been purchased by british customers (It could not be otherwise), so english instructions makes sense. As soon as we'll get them sorted, we'll email them to you. Regarding the Swift FR.5, please take a look at: Best regards.... 1 Link to comment Share on other sites More sharing options...
Shar2 Posted September 6, 2018 Share Posted September 6, 2018 Got mine today, thanks for the quick delivery. Haven't noticed any breakages on mjne, but will gave to double check and rebag. Have emailed Juan about the packaging. Link to comment Share on other sites More sharing options...
viscount806x Posted September 7, 2018 Share Posted September 7, 2018 Good news all round. re: The Swift - you know it makes sense! Reading about little issues on here with unfortunate positioned bubbles, particularly in u/c parts, maybe white metal parts would be an answer but I know you can't do them at the moment. Maybe SAC can come to the rescue! Aeroclub got the hang of them though so not impossible. Somebody above mentioned and questioned underwing serial fonts. I don't have my kit yet but if the 'D' is in question then there were acording to my references distinctly two variations on these. The changeover from a squarish to a rounded 'D' taking place around 1961. Any comments more on this? Dynavector had the square edged ones and Model Alliance, the rounded ones. Link to comment Share on other sites More sharing options...
bentwaters81tfw Posted September 7, 2018 Share Posted September 7, 2018 With the weight of resin, white metal or brass is the way to go. I have a Dynavector kit in store, and this is most likely going to donate it's metal parts. Link to comment Share on other sites More sharing options...
huvut76g7gbbui7 Posted September 7, 2018 Share Posted September 7, 2018 7 hours ago, viscount806x said: The changeover from a squarish to a rounded 'D' taking place around 1961. Any comments more on this? I agree although both types were to be seen in use for many years. To avoid confusion the squarish Dee is like this ,D , where there is a short horizontal before the curve starts and not like the American ones. Later style started the curve at the top of the vertical and had no horizontal. Regrettably my lack of computer skills whereby I can't show you both styles means that you will just have to go and look at Scimitar photos..a trial I know. Did I say that mine hasn't arrived and I can't track it because I've lost all of my e-mails..computers!!!!!!! 😿 Link to comment Share on other sites More sharing options...
tk1608 Posted September 17, 2018 Share Posted September 17, 2018 Have all the scimitar preorders shipped yet ? I haven’t heard anything from Artie to let me know cheers Phil Link to comment Share on other sites More sharing options...
viscount806x Posted September 17, 2018 Share Posted September 17, 2018 3 hours ago, tk1608 said: Have all the scimitar preorders shipped yet ? I haven’t heard anything from Artie to let me know cheers Phil I'm waiting too Phil and not had my tracking ref either. I have a feeling that they are perhaps trying to sort out the air bubble glitches. It'd be nice to know though wouldn't it? Link to comment Share on other sites More sharing options...
tk1608 Posted September 17, 2018 Share Posted September 17, 2018 (edited) Hi, I’m glad in a way, that you haven’t heard either.. I was a bit worried it was just me. Yes it would be good to know. Hopefully not too long to wait now. cheers Phil Edited September 17, 2018 by tk1608 Link to comment Share on other sites More sharing options...
rayprit Posted September 17, 2018 Share Posted September 17, 2018 3 hours ago, tk1608 said: Have all the scimitar preorders shipped yet ? I haven’t heard anything from Artie to let me know cheers Phil Hi all, I was in touch with Artie yesterday about when the next shipment of Scimitars was to be released, seems he has nothing to do with delivery as its down to one of his partners who has the job of shipping them out - up until recently his partner has been on exercises, but, in his letter mention was made that contact would be made to everyone last night, nothings happened my end yet, perhaps he is still on exercise? Anyway, here is a copy of the response that I got from Artie last night, now we all know whats happening Hi, Raymond. I'm not really aware about wich kits have been shipped in the second batch, because it's Juan who takes the paypal record, with names and addresses. Anyway, I've asked him to please inform everyone, and according to his reply, he was going to send an email this evening, updating everyone about the state of the shipments. Last week's military excercises in Fuerteventura have kept him very busy.... Link to comment Share on other sites More sharing options...
tk1608 Posted September 17, 2018 Share Posted September 17, 2018 That’s great. Thanks for posting that. I'm pleased to have just heard from Juan on Facebook. He thinks that mine should be shipped by early October, and that we all will get a tracking number emailed to us. I’m happy to know that things are progressing Link to comment Share on other sites More sharing options...
viscount806x Posted September 17, 2018 Share Posted September 17, 2018 I'm not on Facebook so I'll assume mine will be Oct too. Link to comment Share on other sites More sharing options...
rayprit Posted September 17, 2018 Share Posted September 17, 2018 23 minutes ago, viscount806x said: I'm not on Facebook so I'll assume mine will be Oct too. That makes two of us...………...I wont allow facebook anywhere near my computer, so, I will assume October also Link to comment Share on other sites More sharing options...
tk1608 Posted November 2, 2018 Share Posted November 2, 2018 Hi all Meant to say sooner..mine arrived a couple of weeks ago. Looks great !! Haven’t had much chance to do a lot to it yet. Just cut the wings and tail from their pour stubs.. Cheers Phil Link to comment Share on other sites More sharing options...
rayprit Posted November 3, 2018 Share Posted November 3, 2018 Mina also arrived Monday 29th October...…….already cut the pour stubs off most the pieces and segregated parts into separate bags, looks the business...………...sent away and received new set of Decals to go with this kit Link to comment Share on other sites More sharing options...
viscount806x Posted November 30, 2018 Share Posted November 30, 2018 Any other waitees out there heard any news regarding deliveries? Last I heard (in Oct) was that key guys were away on army manoeuvres. Link to comment Share on other sites More sharing options...
neilh Posted November 30, 2018 Share Posted November 30, 2018 I got mine - out of the blue . Send a PM to Artie- think one of the key guys is back on manoeuvres. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now