Spiny Posted March 17, 2018 Share Posted March 17, 2018 (edited) This one is Revell's 1/25 2006 Hertz Shelby Mustang, just built out of the box so nothing too out of the ordinary. I completed it last April, and it was my first car build in quarter of a century, so please don't judge too harshly It's also the first spray painted model I've done, as well as being the first one I've used a wash on so it has been a bit of a learning process. As for the kit, it's probably gone together better than any of the other (three!) that I've worked on since getting back into the hobby with nothing that really stands out as requiring particular work other than having to glue in the wheel pins as they were a bit loose as floppy. The issues I had with the kit were very much down to operator error rather than issues with the kit itself. So, time for a few pics. I do appear to have had a bit of an attack of the dust monster when I took these, even to the extent of the blob of dust right in the middle of the lens First up, a standard front quarter view. And it also shows far too well how I managed to sand through the clear coat and skin the side-stripe decal while I was polishing. Definitely one of the lessons learned on this model. Shelby Mustang on Flickr Moving backwards, that decal issue is even more obvious. I also made a bit of a mess of the decal around the number plate, and the colour match between the gold touch up and the gold decal is pretty awful. I'm pleased to say that it seems that I have improved with my decalling since this car. This was also the first time it became obvious that windows are going to be my bette noir, and there are far too many times where it feels as though the windows hate me. On the Mustang, the rear window popped out while I was cleaning it before fixing the body on the chassis and took out a chip of paint and decal. I've done the best I could to stick it back, but you can see the damage in this pic. Shelby Mustang on Flickr It's a similar story viewed from the other side, and it anything the issues with the poor colour match on the rear decal repair are more obvious than the previous photo. Shelby Mustang on Flickr And onto the last quarter view, which shows that I also managed to skin this side decal as well. Despite that, I still feel this is the angle which shows off the car to its best Hertz Mustang on Flickr I thought I'd show one from the front too since this the grille was my first attempt at adding a wash. Tried to clean it up and stripped the chrome in one part by mistake, but I went over that area with the Molotow pen, rewashed it and can't tell where I messed up. I have to say that the Molotow pen is superb, provided the surface below is suitably prepped. Shelby Mustang on Flickr A couple of interior shots, just because I'm quite pleased with how it turned out in here (badly lined up masking tape aside!). My only gripe with the kit in here is that the join between the seats goes right through the seat handle in the headrest making filling the gap in this area to a decent standard a bit beyond my talents. The photos also show another thing I learned from this build - Revell clear spray has a really nice shine, but seems to react to the oil in my skin. I had to polish finger marks off the door panels out and was quite successful there, but unfortunately the damage to the finish above the doors was too great. Cotton gloves for me from now on when handling finished paint jobs... Shelby Mustang on Flickr Shelby Mustang on Flickr And finally, the engine bay. I was pleased with the way this turned out - why to the best bits have to be where nobody sees them? Engine Bay on Flickr Looking back at this, it sounds as though I'm not happy with the build, but in truth I was pleased with the outcome. So long as you don't look too closely, it looks pretty presentable and I'm happy to have it in the cabinet. It's also nice to be able to say that I have been able to put lessone learned into progress on later builds which is another good thing for me. Just hope I haven't gone too overboard with the photos. Edited March 17, 2018 by Spiny Doubled pic 15 Link to comment Share on other sites More sharing options...
Alpha Delta 210 Posted March 17, 2018 Share Posted March 17, 2018 You should be pleased with the outcome, I think it is a great result. I look forward to seeing your next build. 1 Link to comment Share on other sites More sharing options...
Clashcityrocker Posted March 18, 2018 Share Posted March 18, 2018 Very nice. You can call the side decal issues, "car park dings" Nigel 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted March 18, 2018 Share Posted March 18, 2018 Yes, it's a Hertz 'rentaracer' after a hectic weekend. The original ones, I've read, suffered worse than yours. A nice result. Please keep them coming. 2 Link to comment Share on other sites More sharing options...
Vince1159 Posted March 18, 2018 Share Posted March 18, 2018 And what do we get,Fiestas!... 2 Link to comment Share on other sites More sharing options...
HOUSTON Posted March 18, 2018 Share Posted March 18, 2018 absolutely STUNNING. 1 Link to comment Share on other sites More sharing options...
Alan R Posted March 18, 2018 Share Posted March 18, 2018 Beautiful! I have a soft spot for Mustangs... Cheers, Alan. 1 Link to comment Share on other sites More sharing options...
Spiny Posted March 18, 2018 Author Share Posted March 18, 2018 (edited) 11 hours ago, Pete in Lincs said: Yes, it's a Hertz 'rentaracer' after a hectic weekend. The original ones, I've read, suffered worse than yours. A nice result. Please keep them coming. Something like this (granted it's not a 'real' Hertz)? Ford Mustang on Flickr From what I could gather, the standard trick with the original Hertz GT350H was to hire one for the weekend, swap the engine into another Mustang, race that, then put the engine back in before returning the cars to Hertz. I'm not in the least bit surprised if a few were raced straight from Hertz though. Thanks to everyone for the kind comments, much appreciated. But I have to disagree on the Fiestas - if there was a model of a roadgoing one I'd buy it like a shot to emulate my day-to-day car As it is, I've had to make do with adding the Belkits rally version to the stash. Edited March 18, 2018 by Spiny Random 'b' appearing 1 Link to comment Share on other sites More sharing options...
mustang1989 Posted March 24, 2018 Share Posted March 24, 2018 Good lookin' car Spiny. Like Alan, I'm definitely a Mustang fan. I've owned 4 of 'em with 3 of those being '67 Coupes and the last on being an '89 LX Coupe. I had ALOT of fun in that LX!! Looking forward to more of your builds. 1 Link to comment Share on other sites More sharing options...
Spiny Posted March 24, 2018 Author Share Posted March 24, 2018 Thank you. I think your forum name may just possibly give away that you're a Mustang fan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now