thorfinn Posted March 13, 2018 Share Posted March 13, 2018 (edited) Hoping to finally show winter the door with something a bit breezy and tropical: the Revell (ex-Matchbox) DHC-6-300 Twin Otter, in the sunny livery of InterCaribbean (formerly Turks & Caicos) Airlines. As one of Matchbox's better late issues, the kit holds up reasonably well in its current Revell/Germany release. Old options still included are skis and floats as landing gear alternatives, and choice of the blunt short nose (used on military aircraft) or the longer tapered 'shovel' nose I used on my civil build. Build was pretty much out-of-box, with a few minor add-ons. The kit's completely blank cabin got some basic 'seat shapes' to have something visible through all those windows. I slipped several fishing sinkers into the nose, to keep her solidly on all three wheels. The simplified landing gear itself got a semblance of brakes for the main wheels, and scissors for the nose strut to replace the solid triangular chunk on the molding. Remaining additions were mainly assorted exterior bits and bobs such as windscreen wipers, aerials, and slightly more petite pitot heads to replace the large kit parts. Last necessary fix---for a grounded bird---was to remember to feather the props, since they do so automatically once hydraulic pressure bleeds off. Decals were home-made, based on the lovely photo of the same aircraft on the Airline's own website. Paints were mainly Tamiya acrylics, with special Testors fluorescent acrylics for some of the bright tail colors. There are a few things I'll do differently next time...one structural, one cosmetic. As to structure, the kit's main gear axles are especially spindly, and might best be replaced with heavy-gauge wire or even paper-clip sections. The cosmetic fix will be more challenging: the kit's windscreen isn't quite wide enough, and the 'A pillars' (to use an automotive term) consequently too wide; this does much to lend a 'blocky' look to what is supposed to be the Twin Otter's fairly sleek cockpit area. (There are some other problems with this area on the kit, but that's for those far more expert than I.) All in all, a nice winter-beating project. I hope you enjoy the pics. Edited March 13, 2018 by thorfinn typo 49 1 Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted March 14, 2018 Share Posted March 14, 2018 (edited) Good looking Twin Otter 👍 the colors look great. I also like you got the props right. Edited March 14, 2018 by Corsairfoxfouruncle 1 Link to comment Share on other sites More sharing options...
SoftScience Posted March 14, 2018 Share Posted March 14, 2018 Wow, that's gorgeous! 1 Link to comment Share on other sites More sharing options...
spaddad Posted March 14, 2018 Share Posted March 14, 2018 orsum 1 Link to comment Share on other sites More sharing options...
Convair Posted March 14, 2018 Share Posted March 14, 2018 Beautiful! 1 Link to comment Share on other sites More sharing options...
John Masters Posted March 14, 2018 Share Posted March 14, 2018 Nice to see and lovingly built as well. 1 Link to comment Share on other sites More sharing options...
arbrownra Posted March 14, 2018 Share Posted March 14, 2018 Totally Tropical! Very nice. 1 Link to comment Share on other sites More sharing options...
MikeC Posted March 14, 2018 Share Posted March 14, 2018 Very colourful, and nicely done. 1 Link to comment Share on other sites More sharing options...
thorfinn Posted March 14, 2018 Author Share Posted March 14, 2018 Thanks, Gents! Link to comment Share on other sites More sharing options...
russ c Posted March 14, 2018 Share Posted March 14, 2018 Wow! that came up nice, great job 1 Link to comment Share on other sites More sharing options...
Viking Posted March 14, 2018 Share Posted March 14, 2018 You wouldn't know that is a clunky old kit, it looks new and sharp. Love the colour scheme. Cheers John 1 Link to comment Share on other sites More sharing options...
thorfinn Posted March 14, 2018 Author Share Posted March 14, 2018 Thank you, Russ and John! Link to comment Share on other sites More sharing options...
CJP Posted March 14, 2018 Share Posted March 14, 2018 You've done a lovely job on the Twin Otter - very smart - what type of printer do you use to print you own decals? CJP 1 Link to comment Share on other sites More sharing options...
thorfinn Posted March 14, 2018 Author Share Posted March 14, 2018 16 minutes ago, CJP said: You've done a lovely job on the Twin Otter - very smart - what type of printer do you use to print you own decals? CJP Thanks for your kind words. Printer is an old 'cheapo' HP F4280 Inkjet. Does a great job for decals...even using less-expensive 'off brand' cartridges. [ I use either Testors or Bare Metal Foil's 'Experts Choice' decal paper---I think they're the same thing---and seal with Testors Decal Bonder spray.] Link to comment Share on other sites More sharing options...
CJP Posted March 15, 2018 Share Posted March 15, 2018 (edited) 41 minutes ago, thorfinn said: Thanks for your kind words. Printer is an old 'cheapo' HP F4280 Inkjet. Does a great job for decals...even using less-expensive 'off brand' cartridges. [ I use either Testors or Bare Metal Foil's 'Experts Choice' decal paper---I think they're the same thing---and seal with Testors Decal Bonder spray.] Thanks for that information - I have a Cannon inkjet which works ok for black serials but colours come out a bit translucent - thought it might be the cheaper ink cartridges I used for the colours - I have used clear lacquer to seal them but found I need a few coats to stop the ink bleeding - must get some of that Testors Decal Bonder spray. CJP Edited March 15, 2018 by CJP spelling Link to comment Share on other sites More sharing options...
thorfinn Posted March 15, 2018 Author Share Posted March 15, 2018 22 minutes ago, CJP said: Thanks for that information - I have a Cannon inkjet which works ok for black serials but colours come out a bit translucent - thought it might be the cheaper ink cartridges I used for the colours - I have used clear lacquer to seal them but found I need a few coats to stop the ink bleeding - must get some of that Testors Decal Bonder spray. CJP For what it's worth---re the bleeding ink---it may not be the sealer. In my experience there are just certain inks that don't do well for decals. It doesn't seem to be related to brands or printer types, just certain ink formulas that never seem to work. In any case, I hope a change of sealers works for you. Good luck. 1 Link to comment Share on other sites More sharing options...
phildagreek Posted March 15, 2018 Share Posted March 15, 2018 Very nice! 1 Link to comment Share on other sites More sharing options...
Orion Posted March 15, 2018 Share Posted March 15, 2018 Beautiful Otter. My highest compliments on this little workhorse. Regards, Orion / The Netherlands. 1 Link to comment Share on other sites More sharing options...
thorfinn Posted March 15, 2018 Author Share Posted March 15, 2018 54 minutes ago, Orion said: Beautiful Otter. My highest compliments on this little workhorse. Regards, Orion / The Netherlands. Thank you, sir! Link to comment Share on other sites More sharing options...
Laufeyson Posted March 15, 2018 Share Posted March 15, 2018 Lovely work. This was used as a commercial aircraft in Norway just 20 years ago. I flew with it a few times during my military service in the north of Norway. Not the most comfortable way to fly, and landing on a snow covered airfield can be quite scary.. I'd rather fly with InterCaribbean Airlines.... 1 Link to comment Share on other sites More sharing options...
thorfinn Posted March 16, 2018 Author Share Posted March 16, 2018 12 hours ago, Laufeyson said: Lovely work. This was used as a commercial aircraft in Norway just 20 years ago. I flew with it a few times during my military service in the north of Norway. Not the most comfortable way to fly, and landing on a snow covered airfield can be quite scary.. I'd rather fly with InterCaribbean Airlines.... Just out of curiosity...were you landing with wheels or skis? [Done a few 'rough landings' in puddle-jumpers, but never on anything other than wheels.] Link to comment Share on other sites More sharing options...
Knight_Flyer Posted March 16, 2018 Share Posted March 16, 2018 Very nice and the livery looks rather neat too. 1 Link to comment Share on other sites More sharing options...
Laufeyson Posted March 16, 2018 Share Posted March 16, 2018 10 hours ago, thorfinn said: Just out of curiosity...were you landing with wheels or skis? [Done a few 'rough landings' in puddle-jumpers, but never on anything other than wheels.] Wheels only. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now