JeroenS Posted May 15, 2018 Share Posted May 15, 2018 Excellent! Nice to see the progress. Link to comment Share on other sites More sharing options...
fightersweep Posted May 17, 2018 Share Posted May 17, 2018 Looks fantastic! Great work so far. Link to comment Share on other sites More sharing options...
griffsrw Posted May 19, 2018 Share Posted May 19, 2018 brilliant project, certainly will be popular. Link to comment Share on other sites More sharing options...
mbdesignart Posted May 20, 2018 Author Share Posted May 20, 2018 The new, better detailed one pice rear door arrived back from the resin caster yesterday. Now cleaned up and fitted with the hinges from the kit door. Nice hot weather ideal for spraying too. 2 Link to comment Share on other sites More sharing options...
mbdesignart Posted June 3, 2018 Author Share Posted June 3, 2018 (edited) Some slight modification has been done on the roof rack to accommodate the tyre stacks. All the cross bars over the 'tyre valley'[not a technical term but it works for me] have been removed to allow a free space into which to drop the tyres which are cast in blocks of three. I'm now on version 2 of these, the first were solid with a cast-in wheel [the darker primer coated ones] but as you can imagine weight was a big issue. Now they are like a stack of those mints with a hole in the middle with a drop-in wheel rim to each end. I've gone for 15" rims with 4 options of different tyres along with a couple of sets of 13" rims & tyres I had lying around just to see how it held up with the weight. I'm also thinking the tyre stacks would be usefull for dramas too. The van body was masked and sprayed TS51 Racing Blue yesterday but it isn't quite dark enough. it looks like either trying Tamiya Dark Blue or a custom mix for the Rothmans blue. I know HB does various shades too. As an aside, my usual image hosting site Dropshots is playing up so I'm giving Postimage.org a try. Edited June 3, 2018 by mbdesignart typo 1 Link to comment Share on other sites More sharing options...
heloman1 Posted June 4, 2018 Share Posted June 4, 2018 Looking good Mark, I too was having problems with Photobucket and am also using Postimages, what a dream, so easy to use... Colin Link to comment Share on other sites More sharing options...
Bonhoff Posted June 4, 2018 Share Posted June 4, 2018 Tyres look really good - Do I see some SP61's in amongst them? Link to comment Share on other sites More sharing options...
mbdesignart Posted June 11, 2018 Author Share Posted June 11, 2018 After initially using the wrong blue I ordered a can of Porsche Dalmation Blue 329 and I'm pleased with the result. Slight issue with some adhesive residue being left on the model from the Washi tape I used as a fill-in mask, it must have reacted with the solvent in the paint. Next up, after this has been left a few days to harden, is masking to spray the window surrounds and rear arches. . 3 Link to comment Share on other sites More sharing options...
Hamden Posted June 11, 2018 Share Posted June 11, 2018 That looks superb Roger Link to comment Share on other sites More sharing options...
kpnuts Posted June 12, 2018 Share Posted June 12, 2018 There is some incredible work going on here. Link to comment Share on other sites More sharing options...
Pete in Lincs Posted June 13, 2018 Share Posted June 13, 2018 Nice paint. Looking forward to more, please. This afternoon, in a commercial yard off the A15 this afternoon, I think this truck is what I saw... 1 Link to comment Share on other sites More sharing options...
PatW Posted June 14, 2018 Share Posted June 14, 2018 (edited) Yes dear Frank Williams, I've spoken to him many times whilst on Air Traffic Control at Silverstone, both before and after the accident, great man. But the team is going through some tough times at present. Oh the build is going very well too. You must have spent a fortune on wheels & tyres for this one! Edited June 14, 2018 by PatW 1 Link to comment Share on other sites More sharing options...
mbdesignart Posted June 14, 2018 Author Share Posted June 14, 2018 Thanks all for the comments and feedback, this build is going a bit slower than I had hoped. Pete, don't tell me that is the only photo you took? Next time do a whole walkaround. PatW, fortunately I'm at the sharp end of wheel & tyre production and those are either test shots or cast offs. I hate to think what truck modellers spend on multi-axle trailer units, or rivet counters on every type of Spitfire, but each to his own area of the hobby - it keeps us quiet 😁 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted June 14, 2018 Share Posted June 14, 2018 I found the picture on line. Google ISO Marlboro. I only had a quick glimpse of the truck as I drove past before it was obscured by vegetation and fences. I caught the name though and it intrigued me. Link to comment Share on other sites More sharing options...
mbdesignart Posted June 14, 2018 Author Share Posted June 14, 2018 Pete, Shame there is no image of the front of the transporter, it would have made an interesting build. Another tiring 🙄 day on the rally service van, tyre stacks and rims painted and assembled. The chassis and cab interior is all done bar a couple of decals to be applied to the dash, I'll upload some images once my camera battery has been recharged. 2 Link to comment Share on other sites More sharing options...
mbdesignart Posted June 15, 2018 Author Share Posted June 15, 2018 The chassis and cab interior have now been completed. 3 Link to comment Share on other sites More sharing options...
mbdesignart Posted June 21, 2018 Author Share Posted June 21, 2018 (edited) This is getting beyond a joke. Having masked the white to spray the blue using a combination of Tamiya and Washi tape when removed there was deposits of adhesive left on the paint surface. I put this down to the solvents in the rattle can [Halfords special colour mix] affecting the Washi tape as this is a paper tape. I managed to wipe the adhesive off with WD40. Now having resprayed the white [Simoniz rattle can] just using Tamiya tape as a mask it is an even worse state with a near overall coating of adhesive from the tape. What are other people who use rattle cans using for masking tape? Click the images to enlarge. Edited June 21, 2018 by mbdesignart image info added 1 Link to comment Share on other sites More sharing options...
JeroenS Posted June 21, 2018 Share Posted June 21, 2018 Ouch... I've used Tamiya tape over Tamiya rattle cans with no issues. But I've done only one model so that's not a vast amount of experience. Link to comment Share on other sites More sharing options...
von Race Posted June 22, 2018 Share Posted June 22, 2018 OMG Mark, how awful! Surprised this project hasn't become "wall art" like some of my problem builds! Since we don't have Halfords or Simoniz rattle cans here, don't know what to say. Are they lacquer or enamels? I use rattle cans exclusively, Tamiya, Testors mostly. For resin I use Dura-Coat, an automotive touch up spray. For masking, I've used 3M Fine line tape, or regular masking tape. I've also used Tamiya masking sheet, (the yellow one). The one that gives me the most problems is the masking tape. Upon removal it has left the imprint of the tape on the paint, but not the actual the glue from the tape. Perhaps some residue from the WD-40 was still in the blue paint? If it makes you feel any better, I ALWAYS have problems with painting resin. I do all the precautions, do all the prep, but there's always a "surprise" waiting for me! Frustrating I know. But as always, looking forward to your next post. Link to comment Share on other sites More sharing options...
mbdesignart Posted June 22, 2018 Author Share Posted June 22, 2018 Having tried various 'solvents' to remove the residue it appears to have etched the blue paint, resulting in it being sanded back for yet another coat of paint. It can't be the resin as the kit is half Italeri plastic and all areas are affected. The blue Halfords [mixed by an auto paint manufacturer for them] auto spray, of unknown chemical make up but no doubt acrylic based due to Health & Safety regs in the land of namby pambies, was left for well over a week to harden. I tried the Tamiya sheet previously when masking the white but that left the glue behind too. I have some 3M auto tape on order which I'm hoping will do the job otherwise it will be a case of seeing if the Transit will stick to a brick wall😠 At this rate I may go back to armour modelling and coat everything with mud! Link to comment Share on other sites More sharing options...
Spiny Posted June 24, 2018 Share Posted June 24, 2018 I was thinking that I hadn't masked and sprayed before, then remembered a bit of the Cuda where I had to. The bit masked was using Humbrol matt black which is also labelled primer, so I can't guarantee any great knowledge of how Halfords paint will react based on that. But looking at the Halfords spray cans, they do say to allow 2 weeks before finishing and removing overspray after you've used it - it's just a thought but maybe the paint hadn't fully cured before you added the masking tape, even after a week? The other thing I did was to mask the edges of the area, but cover the bulk of it with kitchen foil, fully sealed around the edges with (Revell 6 and 10mm) masking tape. Admittedly that doesn't fully cure the problem of the tape reacting with the paint, but it does save on tape and also gives less of an area at risk of reacting or where the paint might pull off with the tape. That tape was on for 4 weeks, so plenty of opportunity for things going pear shaped - I may just have been very lucky. Link to comment Share on other sites More sharing options...
Redstaff Posted June 24, 2018 Share Posted June 24, 2018 That's not what you want to see I've used Tamiya and Halfords rattle cans a few times since I've been back modelling and have had no probs. I use Tamiya tape for the fine stuff and Frog tape for the wider stuff, I only usually leave it a couple of days as well Link to comment Share on other sites More sharing options...
mbdesignart Posted June 25, 2018 Author Share Posted June 25, 2018 The 3M tape has arrived, a vinyl tape so that should be solvent proof. I've stuck a test strip across both the blue and white and will leave this overnight before going full out on another masking job. One of my brothers who was into the custom car scene years ago has mentioned bag sealing tape, as used by bakers, butchers etc. A couple have mentioned Frog Tape, although having used it for house decorating I hadn't thought about giving it a go on models. It is interesting to note the comments about differing tape removal times from 'as soon as possible' to 'a couple of weeks, or longer'. It appears to be a case of what works for one person my not work for everyone, which is true across so many areas of model making. 1 Link to comment Share on other sites More sharing options...
rs2man Posted June 25, 2018 Share Posted June 25, 2018 40 minutes ago, mbdesignart said: The 3M tape has arrived, a vinyl tape so that should be solvent proof. I've stuck a test strip across both the blue and white and will leave this overnight before going full out on another masking job. One of my brothers who was into the custom car scene years ago has mentioned bag sealing tape, as used by bakers, butchers etc. A couple have mentioned Frog Tape, although having used it for house decorating I hadn't thought about giving it a go on models. It is interesting to note the comments about differing tape removal times from 'as soon as possible' to 'a couple of weeks, or longer'. It appears to be a case of what works for one person my not work for everyone, which is true across so many areas of model making. Frog tape will give you the same result as you've already experienced . I thought it was only me who had this problem , but it would appear not . Incidentally , my thought is that it's the adhesive on the tape which somehow attacks the surface of the Halfords paint , since I use Mr Color , which is lacquer-based , over the same tape with no issues . John Green Nantwich , Cheshire 1 Link to comment Share on other sites More sharing options...
Circloy Posted June 25, 2018 Share Posted June 25, 2018 Can't comment on the masking tape, just sprayed the interior of 2 JLTRT Gresley coaches using lifecolour acrylics over a Halfords gloss base and was already dreading sealing the interior with masking tape, what i'm reading on here's not helping ease the worries of paint lifting. For removing sticky gunk residue from tape etc I always start by using lighter fluid & cotton buds, did the trick when I was a kid and still works. Just don't smoke when using it! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now