robgizlu Posted September 17, 2018 Share Posted September 17, 2018 I'd go with the finer 0.5mm Good luck!! Rob 1 Link to comment Share on other sites More sharing options...
longshanks Posted September 18, 2018 Share Posted September 18, 2018 14 hours ago, Courageous said: What is it anybody, @longshanksshould know? I hope you enjoyed your stay in God's country. Thanks for posting the pic of a beautiful craft. As to what she is I can only guess. Around 60 foot long, with a big powerful rig. A Pilot cutter or Trawler. Unusual for trawlers to keep the cutter rig they mostly converted to a ketch rig for ease of handling. The ' L 20...' number indicates a fishing boat registered in Limerick in Southern Ireland. She 's flying the Red Ensign at the stern and the Scottish and Cornish flag at the masthead. The Scottish flag to stbd is in the position usually reserved for a courtesy flag of the country being visited. So considering the facts The name is just visible on the pic you posted so perhaps the original could be enlarged and can you confirm the number? Kev 1 Link to comment Share on other sites More sharing options...
Courageous Posted September 20, 2018 Author Share Posted September 20, 2018 On 9/18/2018 at 8:56 AM, longshanks said: The name is just visible on the pic you posted so perhaps the original could be enlarged and can you confirm the number? Cheers for that Kev, will take a better look when I've a mo. Little update as promised. This is an hours worth using the 0.5mm thread. Still looks over scale but it's better that my last try and shouldn't look too bad when it's rolled up and sitting on the deck. Stuart 7 Link to comment Share on other sites More sharing options...
robgizlu Posted September 22, 2018 Share Posted September 22, 2018 Suffer for your art Stuart! Looks Good Rob 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted September 22, 2018 Share Posted September 22, 2018 Your perseverance with that netting is admirable Stuart! That will really set the model off. Keep weaving! Terry Link to comment Share on other sites More sharing options...
Courageous Posted September 22, 2018 Author Share Posted September 22, 2018 (edited) And here we are: After a few evenings of 'sowing rope' we have the completed net albeit twice the size that's needed. Just prior to cutting the threads and cutting the net in half, I applied a bit of CA to all outer knots, this is not the time for anything to unravel! So far, so good. Now to roll them up. And here they are all rolled up and ready for attaching to launch. Et voila ! Next stop, the base. Stuart Edited September 22, 2018 by Courageous 13 Link to comment Share on other sites More sharing options...
Terry1954 Posted September 22, 2018 Share Posted September 22, 2018 Absolutely brilliant Stuart. Ever thought of taking up rug making? 😁 Terry 1 Link to comment Share on other sites More sharing options...
Courageous Posted September 22, 2018 Author Share Posted September 22, 2018 (edited) Cheers Terry but errr...no but saying that, I found it strangely therapeutic. I've never done a sea base before so the next stage is a bit nerve racking. I say sea base, more like a harbour and this is my aim: http://c8.alamy.com/comp/M9WRMD/two-surrendered-german-schnellboote-e-boats-arriving-at-hms-hornet-the-light-coastal-forces-base-at-gosport-hampshire-uk-to-be-taken-over-by-the-royal-navy-M9WRMD.jpg Just replace the Schnellboote with my ASRL. Stuart Edited September 22, 2018 by Courageous 1 Link to comment Share on other sites More sharing options...
JohnWS Posted September 22, 2018 Share Posted September 22, 2018 Awesome looking net(s), Stuart. All that work really paid off and you've set a new benchmark. John 2 Link to comment Share on other sites More sharing options...
Courageous Posted September 22, 2018 Author Share Posted September 22, 2018 Cheers John. Now I've learnt this 'knitting' skill, it'll be useful for the next ASRL that hopefully isn't going to be too far away. Stuart Link to comment Share on other sites More sharing options...
longshanks Posted September 22, 2018 Share Posted September 22, 2018 Cracking job, a perfect cherry on the top Kev 2 Link to comment Share on other sites More sharing options...
Courageous Posted September 24, 2018 Author Share Posted September 24, 2018 Question for you guys on painting wood effect. The odd bit of wood effect I'm okay with, something like a buff/ sand base and then add/ remove burnt umber oil. But how would go about doing something a bit weathered like this: TIA. Stuart Link to comment Share on other sites More sharing options...
longshanks Posted September 24, 2018 Share Posted September 24, 2018 There are probably as many ways of painting wood as there are types of trees. Which is probably my problem ….. ' I can't see the wood for the trees ' 😉 My own opinion is that at 1/72 you wont see the wood grain. What your looking for perhaps is plank variation as seen above centre and top right in pic. First experiment with the colour, I would suggest grey with a touch of brown added. Score the planks and you may with a steady hand be able to paint between the lines varying the colour with each plank. i.e. plank 1,3, 4, 9, 11 & 15 one colour. Change the tint and paint 2,7, 14 & 15 etc etc Washes over the top will blend it all together Or get or cut 1mm masking tape and repeat above. HTH Kev 2 1 Link to comment Share on other sites More sharing options...
JohnWS Posted September 24, 2018 Share Posted September 24, 2018 Hi Stuart. I did a little Googling about simulating weathered wood. It looks like the railroad hobbyists have a lot of experience weathering wood buildings, bridges & rail car decks. One technique I wouldn't have thought of was painting the surface with thinned white latex primer & then brushing on thinned India ink to stain the surface & give it that grey aged wood look. It might be worthwhile checking out some of the model railroad sites. John 2 1 Link to comment Share on other sites More sharing options...
robgizlu Posted September 24, 2018 Share Posted September 24, 2018 Always difficult to get right - I think Kev describes the commonest approach, greys rather than brown gets you close with multiple washes including green as is evident in the picture. I think tonal variation is far more important than texture at this scale. Here's me struggling with the teak deck on a corvette Keep us posted Stuart. Rob 5 1 Link to comment Share on other sites More sharing options...
Courageous Posted September 25, 2018 Author Share Posted September 25, 2018 Thanks guys, let's see what those railway guys do. Stuart Link to comment Share on other sites More sharing options...
Courageous Posted September 26, 2018 Author Share Posted September 26, 2018 Using what I had at hand, I ran a experiment using plasticard as the canvas as this will is what the floating jetty is going to be made of. I found this and gave it a try. Grey Halford's primer, washed with Humbrol's 'dark wash', followed by grey and green pastels. The image doesn't do it justice but on the bench, it looks ok. I think if I go a little lighter and vary the plank tones as Kev says, it'll look better. I might be good to go and started building these 'floaty things'. Stuart 7 Link to comment Share on other sites More sharing options...
phildagreek Posted September 27, 2018 Share Posted September 27, 2018 Looks good! Those nets are smart. 1 Link to comment Share on other sites More sharing options...
robgizlu Posted September 29, 2018 Share Posted September 29, 2018 Stuart - Just stumbled across this whilst researching Fairmile D boats, thought you might be interested. Check out from approx 8 mins onwards http://www.eafa.org.uk/catalogue/933 I was fascinated. Black antifouling hull and ?medium sea grey upperstructure - much lighter than often depicted . HTH Rob 2 Link to comment Share on other sites More sharing options...
longshanks Posted September 30, 2018 Share Posted September 30, 2018 Great footage, hope you noticed the insulators 😉 Kev 2 Link to comment Share on other sites More sharing options...
Courageous Posted September 30, 2018 Author Share Posted September 30, 2018 19 hours ago, robgizlu said: Stuart - Just stumbled across this whilst researching Fairmile D boats, thought you might be interested. Check out from approx 8 mins onwards http://www.eafa.org.uk/catalogue/933 I was fascinated. Black antifouling hull and ?medium sea grey upperstructure - much lighter than often depicted . HTH Rob Thanks for that Rob, very interesting, it looks useful for my next ASRL...booked marked. And talking of the D, what's happening with the girl? Stuart Link to comment Share on other sites More sharing options...
robgizlu Posted September 30, 2018 Share Posted September 30, 2018 13 minutes ago, Courageous said: Thanks for that Rob, very interesting, it looks useful for my next ASRL...booked marked. And talking of the D, what's happening with the girl? Stuart Stuart -I'm still at the research stage - but I'm keen to sweat Jamie's paints. I'm loving the mix of B30, B55 and B15 etc thus: https://www.britmodeller.com/forums/index.php?/topic/235044293-fairmile-d-colour-picture-identityattribution/ It means forking out for a Coastal Craft ready made offering but.........Christmas is coming Rob 1 Link to comment Share on other sites More sharing options...
Courageous Posted October 4, 2018 Author Share Posted October 4, 2018 Update to show things have not stagnated. Floating jetty sections on the go. Left is a basic section with access hatch and planking added. Right, another section a little further along edging added and primed . Here are all the sections that will be used. Foam board with launch shaped trench. A WiP launch fitted for effect. A launch alongside the proposed jetty. Hopefully you've got the idea. Stuart 7 Link to comment Share on other sites More sharing options...
Courageous Posted October 15, 2018 Author Share Posted October 15, 2018 Little update to show that it's still moving. The subject is stuck into its hole using some old decorators filler. Because I'll be using Liquitex Pouring Medium as the water, I've had to seal around the hull with toilet paper and PVA glue to prevent filling the void. Decking is primed in grey and a black wash applied. When dried, light grey acrylic pastel dust is brushed along the planks to knock back the black. Green pastel dust was then applied to areas to add tonal variety, this was repeated to the vertical rises. A couple of RAF guys are in the process of being painted. Next, fixtures and fittings will need to be fitted to the decks. Stuart 4 Link to comment Share on other sites More sharing options...
JohnWS Posted October 15, 2018 Share Posted October 15, 2018 The decking looks great Stuart. Can't wait to see the diorama put together. John 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now