Homebee Posted May 4, 2018 Author Share Posted May 4, 2018 Released - 1/72 - Lockheed Martin F-35A Lightning II CTOL version https://www.italeri.com/scheda.asp?idProdotto=2699 V.P. 2 Link to comment Share on other sites More sharing options...
Albeback52 Posted May 6, 2018 Share Posted May 6, 2018 Five shades of grey!. Yuk! Link to comment Share on other sites More sharing options...
Truro Model Builder Posted May 6, 2018 Share Posted May 6, 2018 At least the Italians have put a splash -well, a few drops anyway- of colour on theirs. 1 Link to comment Share on other sites More sharing options...
Homebee Posted June 1, 2018 Author Share Posted June 1, 2018 Released - ref.1418 - 1/72 - Aermacchi MB-339A P.A.N. 2018 Livery Source: https://www.italeri.com/scheda.asp?idProdotto=2711 V.P. 1 Link to comment Share on other sites More sharing options...
Homebee Posted June 1, 2018 Author Share Posted June 1, 2018 Released - ref.1415 - 1/72 - McDD F-15C Eagle Source: https://www.italeri.com/scheda.asp?idProdotto=2712 V.P. 1 Link to comment Share on other sites More sharing options...
Homebee Posted June 1, 2018 Author Share Posted June 1, 2018 Released - ref.2671 - 1/48 - Douglas A-4E/F/G Skyhawk Source: https://www.italeri.com/scheda.asp?idProdotto=511 V.P. Link to comment Share on other sites More sharing options...
Homebee Posted June 1, 2018 Author Share Posted June 1, 2018 Released - ref.2781 - 1/48 - McDD F-4J Phantom II Source: https://www.italeri.com/scheda.asp?idProdotto=2713 V.P. 4 Link to comment Share on other sites More sharing options...
Jackman Posted June 1, 2018 Share Posted June 1, 2018 (edited) That 1/48 Skyhawk looks good. Is that the Hasegawa kit re-boxed by Italeri? EDIT: Never mind. Found the answer: http://www.hyperscale.com/2008/reviews/kits/italeri2671reviewbg_1.htm Edited June 1, 2018 by Jackman Link to comment Share on other sites More sharing options...
AirfixAndy Posted June 2, 2018 Share Posted June 2, 2018 Nice to see the F4J UK option available again .....also tempted to get the Skyhawk . Andy Link to comment Share on other sites More sharing options...
SleeperService Posted June 2, 2018 Share Posted June 2, 2018 I have very fond memories of that Skyhawk and will certainly like another. Cockpit is basic as the review mentions but considering the cost of the kit what do you expect? Link to comment Share on other sites More sharing options...
k5054nz Posted June 3, 2018 Share Posted June 3, 2018 Bring on the 1/48 JetRanger repop...! 1 Link to comment Share on other sites More sharing options...
TEMPESTMK5 Posted June 21, 2018 Share Posted June 21, 2018 Good morning Does anybody knwos when the 1/72 P 47D30 announced on the 2018 catalogue will be released ? Patrice Link to comment Share on other sites More sharing options...
Homebee Posted June 30, 2018 Author Share Posted June 30, 2018 Released - 1/72nd - ref. 1396 - BAe Hawk T.Mk.1 Source: https://www.italeri.com/scheda.asp?idProdotto=2717 V.P. 4 Link to comment Share on other sites More sharing options...
Homebee Posted June 30, 2018 Author Share Posted June 30, 2018 Release - 1/48th - ref. 2750 - Lockheed F-117A Nighthawk Source: https://www.italeri.com/scheda.asp?idProdotto=2477 V.P. Link to comment Share on other sites More sharing options...
PhantomBigStu Posted June 30, 2018 Share Posted June 30, 2018 That hawk even with the kits canopy issue is very tempting 2 Link to comment Share on other sites More sharing options...
Truro Model Builder Posted July 1, 2018 Share Posted July 1, 2018 18 hours ago, PhantomBigStu said: That hawk even with the kits canopy issue is very tempting Yes, there are at least three decal options I like. Might be worth it just for the sheet. 2 Link to comment Share on other sites More sharing options...
Homebee Posted July 13, 2018 Author Share Posted July 13, 2018 (edited) Next in line - Source: https://nowosci.plastikowe.pl/aktualnosci/zapowiedzi-italeri-lipiec-2018/ 1/48th - ref. 2786 — General Dynamics F-16A Fighting Falcon 1/72nd - ref. 1411 - LTV A-7E Corsair II V.P. Edited July 13, 2018 by Homebee 1 Link to comment Share on other sites More sharing options...
tempestfan Posted July 13, 2018 Share Posted July 13, 2018 On 5/6/2018 at 11:48 AM, Albeback52 said: Five shades of grey!. Yuk! Make it 50 shades and it instantly gets more interesting. And you get more google hits with your build thread... That 1/48 F-4J looks like a much-modded Esci mould, especially in the cockpit. I assume the two lower fuselage sections on the fuselage sprue are for the recent RF‘s that Italeri extrapolated from the Esci moulds? Link to comment Share on other sites More sharing options...
IanC Posted July 13, 2018 Share Posted July 13, 2018 On 5/4/2018 at 8:27 PM, Homebee said: Released - 1/72 - Lockheed Martin F-35A Lightning II CTOL version https://www.italeri.com/scheda.asp?idProdotto=2699 V.P. Grey they may be, but after seeing three of these fly over London during the RAF flypast on Tuesday I'd really like to build one. They looked (and sounded) really quite special! 1 Link to comment Share on other sites More sharing options...
Giorgio N Posted July 13, 2018 Share Posted July 13, 2018 On 6/30/2018 at 8:03 PM, PhantomBigStu said: That hawk even with the kits canopy issue is very tempting On 7/1/2018 at 2:16 PM, Truro Model Builder said: Yes, there are at least three decal options I like. Might be worth it just for the sheet. Same here, I'm tempted to get one just for the decal sheet. Apart from the stencils, that look to me the usual oversized Italeri ones... Link to comment Share on other sites More sharing options...
Giorgio N Posted July 13, 2018 Share Posted July 13, 2018 3 hours ago, tempestfan said: That 1/48 F-4J looks like a much-modded Esci mould, especially in the cockpit. I assume the two lower fuselage sections on the fuselage sprue are for the recent RF‘s that Italeri extrapolated from the Esci moulds? Can you see if Italeri has included the RF clear parts ? The windscreen was the main accuracy issue of the Esci kit but IIRC the Italeri RF had a new windscreen that looked much better Link to comment Share on other sites More sharing options...
Vladan Dugaric Posted July 13, 2018 Share Posted July 13, 2018 (edited) They haven't included the new clear part; the clear sprue is the same as in the original ESCI version, with some damage repair to windscreen, so the frame on it has been mostly polished out (which is not a bad thing, as the frame was too thin anyway). They did include the new exhaust nozzles, which are a big improvement on the original ESCI ones. These have some depth and an incorrect afterburner spray bar part which has 8 spokes and 1 ring, instead of 7 spokes and 3 rings. There are also no inner nozzle petals, but the outside is pretty good. Edited July 13, 2018 by Vladan Dugaric Link to comment Share on other sites More sharing options...
Homebee Posted August 4, 2018 Author Share Posted August 4, 2018 Released - ref. 1411 - LTV A-7E Corsair II Source: https://www.italeri.com/scheda.asp?idProdotto=2739 V.P. Link to comment Share on other sites More sharing options...
Homebee Posted August 4, 2018 Author Share Posted August 4, 2018 Released - ref. 2786 - General Dynamics F-16A Fighting Falcon Source: https://www.italeri.com/scheda.asp?idProdotto=2747 V.P. Link to comment Share on other sites More sharing options...
exdraken Posted August 5, 2018 Share Posted August 5, 2018 On 6/30/2018 at 6:52 PM, Homebee said: Release - 1/48th - ref. 2750 - Lockheed F-117A Nighthawk Source: https://www.italeri.com/scheda.asp?idProdotto=2477 V.P. Any verdict on the F-117 decals? Very tempting!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now