Lord Riot Posted December 2, 2017 Share Posted December 2, 2017 (edited) At some point I'm planning on building my Airfix Sabre F.4, but I must say I'm rather underwhelmed by the decals. Apart from the shark mouth, they're a little boring in my opinion and an odd choice given that in the 50s there were a few Sabre squadrons with lovely garish unit markings! Fortunately, when I bought the kit from eBay, it very nicely included an Xtradecal set with markings for a few different Sabres (though frustratingly no serials!!) I'm thinking of doing a 92 sqn one, with a preference for an XB... serial and silver undersides. I was wondering if anyone may be able to help with the following questions: Did XB772 (or XB727) ever fly with 92 sqn? Were any XB serialled Sabres silver underneath, or all that awful (imo) 'PRU blue'? Edited December 2, 2017 by Lord Riot Link to comment Share on other sites More sharing options...
Giorgio N Posted December 2, 2017 Share Posted December 2, 2017 The general rule is that only aircrafts in the XD range had silver undersides, however there is phtografic evidence of aircrafts with XB serial and silver undersurfaces, although with the higher demarcation typical of PRU Blue painted machines. One such machines was XB542/Z of 66 Sqn, there may have been others but in any case it would have been a rare thing Neither of the aircrafts you mention ever flew with 92 Sqn, aircrafts in the XB range known to have flown with this unit are XB677/H, XB694/N, XB757/R, XB837/K, XB982/B, XB998/H. 3 Link to comment Share on other sites More sharing options...
Lord Riot Posted December 2, 2017 Author Share Posted December 2, 2017 Fantastic info Giorgio, thanks! Link to comment Share on other sites More sharing options...
Moggy Posted December 2, 2017 Share Posted December 2, 2017 I've built the Academy kit as RAF Sabre F.4 using the Modeldecals sheet. The sheet includes a wealth of info & pictures together with modelling comment. It has markings for almost all RAF Sabre sqns - but you have to fix the serials & cockades the size of which is the instructions. I was about to buy the letters & numbers Modeldecal sheet... and then I found several RAF fonts! Since I often do my own decals I decided to print my own. The cockades... after carefully surveying my decal stash I found exactly the right roundels (well printed & centered too!) on Hannant's-reprinted FROG decals! I can show some (stinky) pictures of said model if you wish - I would not want to hijack your thread Cheers, Moggy 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted December 2, 2017 Author Share Posted December 2, 2017 Sure Moggy, let's see it! 1 Link to comment Share on other sites More sharing options...
shatters Posted December 2, 2017 Share Posted December 2, 2017 Most if not all the sabres in rafg had pru blue undersides, the 2 UK based squadrons had natural metal undersides. Phil 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted December 2, 2017 Author Share Posted December 2, 2017 Would the natural metal be the same as I used on a Swift (Humbrol 56 'aluminium') or is it silver (H11)? The aluminium is actually darker than I expected. Link to comment Share on other sites More sharing options...
Andrew Jones Posted December 2, 2017 Share Posted December 2, 2017 12 minutes ago, shatters said: Most if not all the sabres in rafg had pru blue undersides, the 2 UK based squadrons had natural metal undersides. Phil No RAF sabres had natural metal undersides , they were High Speed Silver ie. painted aluminium 4 Link to comment Share on other sites More sharing options...
Moggy Posted December 2, 2017 Share Posted December 2, 2017 1 hour ago, Lord Riot said: Sure Moggy, let's see it! Sorry for the delay! I built it 2014 Here it is: Cheers, Moggy 6 Link to comment Share on other sites More sharing options...
Sabrejet Posted December 2, 2017 Share Posted December 2, 2017 A bit late to the party but I hope I can clarify. RAF Sabres wore three basic schemes, but with a couple of exceptions: 1. 'delivery' scheme - overall NMF (high visibility insignia red wingtips and tailplanes fro delivery) - retained by a number of non-squadron units (A&AEE, CFE etc) 2. Fighter Command colour scheme (UK-based XD-serial a/c) - undersides were painted silver, not NMF. 3. 2ATAF 'Germany' colour scheme (XB-serial a/c) - higher underside demarcation which was cerulean blue (often referred to as PRU blue). But there were a couple of exceptions. XB542/Z of 66 Sqn was, as far as I can ascertain, the only XB-serialled RAF Sabre to have silver undersides, but retained the 2ATAF 'high' demarcation: Here are a few other Fighter Command (92 Sqn this time) 'XB' Sabres, which show that they retained their full 2ATAF schemes, despite now being under Fighter Command: XB757/R: XB694/N: Though some XB-serial 2ATAF Sabres ended up with Fighter Command squadrons, for political reasons the reverse was not the case. However if you want something different, how about XB543? It was the first camouflaged Sabre in Europe (before Canada began camouflaging its Sabres) and had the lower demarcation but with cerulean blue undersides and NMF drop tanks & pylons: But if you want to go a bit further, XB930 of 'A' Flight 130 Sqn is my favourite. I think it's the only RAF Sabre with nose art: in this case 'Zeke' (named after the cartoon character Zeke Midas Wolf). Code letter 'B' on a red disc. As far as I know it hasn't been modelled or decalled before. Colour image is a still from a contemporary cine film taken at Bruggen. It is based on this, but with flying boots, bone dome, parachute etc: 2 3 Link to comment Share on other sites More sharing options...
stever219 Posted December 2, 2017 Share Posted December 2, 2017 1 hour ago, Andrew Jones said: No RAF sabres had natural metal undersides , they were High Speed Silver ie. painted aluminium If you can find them older tins of Humbrol Metalcote matt aluminium aren't too baud a match for High Speed Silver; newer ones seem to be a bit grey. Alternatively your local motor accessories shop might be able to supply something like the famed Nissan Silver which is also reputed to be a reasonable likeness. Link to comment Share on other sites More sharing options...
72modeler Posted December 2, 2017 Share Posted December 2, 2017 SJ, You ARE da man! Great schemes! Thanks so much for taking the time to find and share them, as always! (BTW, is there paint on your FJ2?) Mike 1 Link to comment Share on other sites More sharing options...
Courageous Posted December 2, 2017 Share Posted December 2, 2017 Another thing to look out for is the Sabre wing configuration. I have the 'Model Decal' decal set for RAF Sabres and it shows XB Sabres with slatted and 6-3 wings. So I would say, check photo references for your aircraft. Stuart 1 Link to comment Share on other sites More sharing options...
camper1 Posted December 2, 2017 Share Posted December 2, 2017 Looks like I'm late to the dance again, hope the following helps, XB727 Went to 422Sq RCAF,then to 234 Sq as Y,then to italy.This aircraft flew with both types of wing. XB772 Went to 112 Sq as P,to USAF May 1957,then to Yugoslavia.Only flew wit the 6-3 wing. XB837 K and XB694 N were both with 92 Sq and had the high demarcation PRU blue undersides and flew with both types of wings, there may be other 92 Sq machine with blue undersides. As far as I am aware most 92 aircraft had HSS undersurfaces, as always a photo is the best form of ref. Cheers Ian 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted December 2, 2017 Author Share Posted December 2, 2017 (edited) This is brilliant, thanks so much for the info! Especially those images Sabrejet! Moggy, your rendition of XB956 is absolutely superb! If mine ends up anywhere close to that I'll be delighted. I'm thinking I might go for an XD serial, silver undersides, possibly 92 sqn, but would need the decals for the serial numbers. Edited December 2, 2017 by Lord Riot 1 Link to comment Share on other sites More sharing options...
stever219 Posted December 3, 2017 Share Posted December 3, 2017 21 minutes ago, Lord Riot said: I'm thinking I might go for an XD serial, silver undersides, possibly 92 sqn, but would need the decals for the serial numbers. XD727/D of 92 Squadron is often illustrated and is covered on the Modeldecal sheet. She had 6-3 wings and High Speed Silver undersides with a low demarcation. There's a nice photo of her on (I think) very short finals that suggests that the initially gloss paintwork had weathered to just short of mattf. The paint also appears to have faded somewhat, but uniformly, without the darker boundaries around panel edges often depicted on models: the most obvious panel joints are along the upper fuselage, the front and rear spars and the gun access doors but they are not heavily delineated. 1 1 Link to comment Share on other sites More sharing options...
Wez Posted December 3, 2017 Share Posted December 3, 2017 (edited) The only things I can add to this is that there was no colour called cerulean blue in the RAF inventory, it's nomenclature (inventory name) is PRU Blue (probably Blue, Photographic Reconnaissance Unit knowing the perverse naming convention of the MoD) , cerulean blue is a description, also all RAF Sabre cockpits and seats were black. Edited December 3, 2017 by Wez 2 Link to comment Share on other sites More sharing options...
Wez Posted December 3, 2017 Share Posted December 3, 2017 7 hours ago, stever219 said: There's a nice photo of her on (I think) very short finals that suggests that the initially gloss paintwork had weathered to just short of mattf. The paint also appears to have faded somewhat, but uniformly, without the darker boundaries around panel edges often depicted on models Thanks Steve! I wish more people would actually look at how a real aircraft weathers. Sabrejet, thanks again for your generous contribution with lots of photos, click and save has been going into overdrive. 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted December 3, 2017 Author Share Posted December 3, 2017 8 hours ago, stever219 said: XD727/D of 92 Squadron is often illustrated and is covered on the Modeldecal sheet. She had 6-3 wings and High Speed Silver undersides with a low demarcation. There's a nice photo of her on (I think) very short finals that suggests that the initially gloss paintwork had weathered to just short of mattf. The paint also appears to have faded somewhat, but uniformly, without the darker boundaries around panel edges often depicted on models: the most obvious panel joints are along the upper fuselage, the front and rear spars and the gun access doors but they are not heavily delineated. Thanks Steve, that's brilliant info. I may well go for 727 then. Cutting up the kit serial I'd only need a letter D decal from somewhere too! Link to comment Share on other sites More sharing options...
stever219 Posted December 3, 2017 Share Posted December 3, 2017 10 minutes ago, Lord Riot said: Thanks Steve, that's brilliant info. I may well go for 727 then. Cutting up the kit serial I'd only need a letter D decal from somewhere too! I may have 2 copies of the Modeldecal sheet: if I have you can have the Ds from the second sheet. I'll check when I get back from work this afternoon and let you know. 1 Link to comment Share on other sites More sharing options...
Sabrejet Posted December 3, 2017 Share Posted December 3, 2017 In case it's of use, this is the photo referred to (Crown Copyright): 2 Link to comment Share on other sites More sharing options...
Lord Riot Posted December 3, 2017 Author Share Posted December 3, 2017 1 hour ago, stever219 said: I may have 2 copies of the Modeldecal sheet: if I have you can have the Ds from the second sheet. I'll check when I get back from work this afternoon and let you know. Fantastic, thanks Steve! Link to comment Share on other sites More sharing options...
stever219 Posted December 3, 2017 Share Posted December 3, 2017 Got a pair of Ds,o, for you! Modeldecal allow you to do XD727, XB837/K and, IIRC, XB934/N, the latter pair with PRU Blue undersides. PM me your address and I'll get your bit in the post for you. 1 Link to comment Share on other sites More sharing options...
Giorgio N Posted December 4, 2017 Share Posted December 4, 2017 (edited) On 2/12/2017 at 8:38 PM, Lord Riot said: Would the natural metal be the same as I used on a Swift (Humbrol 56 'aluminium') or is it silver (H11)? The aluminium is actually darker than I expected. General comment: I don't know why Airfix insists on suggesting Humbrol 56... it's quite a dark colour and while it's very useful for a lot of other things, IMHO doesn't really represent well the paint used on postwar British aircrafts. The suggested Humbrol matt aluminum is a very good paint for this scheme the old Cytadel Mythril Silver acrylic was great but unfortunately it's OOP. There are of course plenty of other options in the many paint ranges available, in any case you want something lighter than H56 Edited December 4, 2017 by Giorgio N 1 Link to comment Share on other sites More sharing options...
Lord Riot Posted December 4, 2017 Author Share Posted December 4, 2017 Thanks Giorgio. That Humbrol 56 does look dark. I’ve since got a spray can of metallic silver, which should do for RAF 1950s undersides and for an early USAF Starfighter hopefully! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now