capri-schorsch Posted October 22, 2017 Share Posted October 22, 2017 (edited) Hi, after i finished my latest model i quickly started a new one. This time its the old group C Ford C100 and his later brother the Zakspeed C1/8. The Ford factory car was the first that raced in the new group c tournament. But against the Porsche 956 he got absolut no chance. The whole car was too soft and the cosworth engine was a real vibrator to the car and destroyed parts and the drivers. The later Zakspeed version with their own turbo engine was a bit better,but still got no chance against the Porsche`s. But the car won the Interserie tournament with my favorite driver Klaus Niedzwiedz. Decals are already here.Made by Michael from scalegrafixx.de. Starting point are the very old rc-body from Tamiya.I got two of them to build both versions. I will try to use the tires and the resin chassis from my Porsche 956.Dont know if this works? The factory car should be the easy one.The GWB Zakspeed car needs lots of body changes. How ever,its one of my favorite cars from Zakspeed as i saw it in real racing against the Porsche. Any picture from these car would be very helpful for me.I think i got all the published books out there.But maybe somebody got some secret pics on his hdd drive at home and wants to share with me? regards Christian Edited November 15, 2017 by capri-schorsch 6 Link to comment Share on other sites More sharing options...
Sabrejet Posted October 23, 2017 Share Posted October 23, 2017 Now we're talking! Mine's a Jaegermeister! 1 Link to comment Share on other sites More sharing options...
Hamden Posted October 23, 2017 Share Posted October 23, 2017 Nice project will follow along if you don't mind? Roger 1 Link to comment Share on other sites More sharing options...
Nick Belbin Posted October 23, 2017 Share Posted October 23, 2017 I'll keep an eye on this very timely build - I have a 1/24 version which I'm hoping to start around Christmas time! Nick 1 Link to comment Share on other sites More sharing options...
capri-schorsch Posted October 26, 2017 Author Share Posted October 26, 2017 Which version do you want to build Nick? Some changes to the body of the Zakspeed C1/8 are made now. The air intakes are closed and the rear of the car is changed. Detail shot from the rear end. The intakes at the sides are also closed and the front wheel house has changed. regards Christian Link to comment Share on other sites More sharing options...
capri-schorsch Posted November 1, 2017 Author Share Posted November 1, 2017 Next progress on the Zakspeed. The front hood needed some clinical surgery. The lights are done.only the inlays needs some sanding. The front air intake was made of ureol and lot of putty. time to sanding again. regards Christian 1 Link to comment Share on other sites More sharing options...
capri-schorsch Posted November 2, 2017 Author Share Posted November 2, 2017 Front air intake is 95% done. Still needs some small changes,but the mainly shape is done. regards Christian 1 Link to comment Share on other sites More sharing options...
Hamden Posted November 3, 2017 Share Posted November 3, 2017 Coming together nicely, great work as always! Roger Link to comment Share on other sites More sharing options...
capri-schorsch Posted November 15, 2017 Author Share Posted November 15, 2017 The Zakspeed is done.Most of the body. I looked at my original pictures for a while and at the end i am nit 100% sure that this version was running these days? There are so much different version and evolution at the race car i want to build and not enough reference pictures. So i decided to build it in my own way. Now i try to find a matching zero paint color for the green,orange and blue on the car. regards Christian 2 Link to comment Share on other sites More sharing options...
capri-schorsch Posted November 23, 2017 Author Share Posted November 23, 2017 Next step are the come together of body and chassis. The front wheels did not fit into the small wheel arches.So i had to scratch a bit.I sanded the wheel on the top and on the bottom a bit. Was better but still a right height of a SUV. So i used a styrene sheet under both side and now it looks way better.You can see the brown putty i used for it. First time for me to open the door.Works well,but again a problem was detected. When the door is open it can lay onto the fender just like the real car ca. Seams like Tamiya did some strange angles at the body. So i simply cut another edge from the door and now it can be glued to the fender when its done. Its not correct,but it works.That is what counts. On the inside i used some pins and sockets to hold altogether in the right spot.works fine,only need some fine sanding. Christian Link to comment Share on other sites More sharing options...
capri-schorsch Posted December 18, 2017 Author Share Posted December 18, 2017 The C1/8 grows. The chassis is nearly done.Only some small adjustments. The inside was build with plastic sheet.The 956 Chassis fits good,only a few changes are made. Rear of the car with diffusor and frame. Shot from "down under".Its not like the real one,but its ok. Chassis and body could be click together easily. Thanks for watching! 3 Link to comment Share on other sites More sharing options...
heloman1 Posted December 19, 2017 Share Posted December 19, 2017 Interesting subject, I'll follow your build with interest. Colin 1 1 Link to comment Share on other sites More sharing options...
capri-schorsch Posted January 3, 2018 Author Share Posted January 3, 2018 New year and some more progress on the Zakspeed group C ar. The body main color is done now.I used Tamiya white fine primer as the base color.Works fine. The stripes color was bought from Zero Paint.Now i only have to mask all the stripes. Looks like a lot of work to me. The cut out door get a sub frame with lots of holes in it. The rear wing was a 1+1/4 Porsche 956 wing.The side plates are made from plastic sheet. Thats all,have to mask that stripes now. regards Christian 5 Link to comment Share on other sites More sharing options...
capri-schorsch Posted January 6, 2018 Author Share Posted January 6, 2018 Stripes part one are made. I used the Tamiya masking tape 5mm white which works perfect for all the curves. Now it can dry over night before i tackle the orange stripes. regards Christian 3 Link to comment Share on other sites More sharing options...
ElectricLightAndy Posted January 6, 2018 Share Posted January 6, 2018 I love your projects, always interesting subjects! Andy 1 Link to comment Share on other sites More sharing options...
capri-schorsch Posted January 7, 2018 Author Share Posted January 7, 2018 Thanks a lot! Sounds very good. It looks better and better with every color more. Orange works also fine. Next will be the green stripes and than a shot of clear coat. Only got one tiny mistake which i can repair very easy. regards Christian 1 Link to comment Share on other sites More sharing options...
noeyedears Posted January 7, 2018 Share Posted January 7, 2018 wow, this looks a real labour of love. very impressive. 1 Link to comment Share on other sites More sharing options...
capri-schorsch Posted January 8, 2018 Author Share Posted January 8, 2018 Thanks! The stripes are done. Only two or three spots needs some attention. Than i will spray the first layer of clear coat before i apply the decals. regards Christian 3 Link to comment Share on other sites More sharing options...
Hamden Posted January 9, 2018 Share Posted January 9, 2018 Looking very nice can't wait to see it with the decals on! Roger 1 Link to comment Share on other sites More sharing options...
sharknose156 Posted January 9, 2018 Share Posted January 9, 2018 Hello Capri Happy New Year Amazing how you find these great legendary monsters and improve them ! are you using a spraygun iwata ? if so which one ? very well done !! Sam 1 Link to comment Share on other sites More sharing options...
noeyedears Posted January 10, 2018 Share Posted January 10, 2018 nice stripy job! 1 Link to comment Share on other sites More sharing options...
capri-schorsch Posted January 11, 2018 Author Share Posted January 11, 2018 @sharknose: I use a Neo for Iwata double-action gun for the small stuff. For the clear coat i got a HVLP gun with a bigger needle.Not the high-end gun,but works fine for me. First coat clear coat was applied today. It cant be seen on the pic,but believe me its there. So i can start tomorrow with the decals. regards Christian 1 Link to comment Share on other sites More sharing options...
capri-schorsch Posted January 13, 2018 Author Share Posted January 13, 2018 Most of the decals are done. Looking nice so far.There are only three decals that need some attention. The roof decals is much too big and needs a smaller size and also the front wing decal "Pentosin" is too big.And at the back i need a new number 8 for the zakspeed c1/8 instead of 1/4. Thats all. regards Christian 3 Link to comment Share on other sites More sharing options...
noeyedears Posted January 13, 2018 Share Posted January 13, 2018 sure is looking pretty. 2 Link to comment Share on other sites More sharing options...
capri-schorsch Posted February 13, 2018 Author Share Posted February 13, 2018 The body parts are now done.All are polished and waiting for the chassis. I used some Alclad for the chassis.The tires are also done together with some smaller parts. Time to put these parts together and go on with the cockpit stuff. regards Christian 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now