Jasonb13 Posted September 23, 2017 Share Posted September 23, 2017 Hi all... Really looking forward to this GB. I've had this kit nearly a year, got it at a Kitswap. I've read decent enough things about it, and this GB is ideal for it (though I did have to check that the Su-34 Fullback is ok for a Flanker GB!). Anyhow, here's the box and the runners: As you can see, a lot of the plastic is for the ordinance, and I reckon I'll be building it fairly well loaded. I was originally going to do one of the box schemes (three tone camo) but after recently doing a 4 tone blue Su-25TM, I've decided to keep this one a little simpler and do the newer Eggplant Dark Grey over Light Blue. I still need to order the paint (I'm going to try Mr. Paint for the Eggplant Dark Grey as I've heard good things about it) and I also need to order some Decals. Am leaning towards a sheet I saw of Su-34s in Syria, with the Red Stars on the tails overpainted, but I'm also not sure how I feel about building a specific scheme that's been in the news so recently. Will have to see how my moral compass feels about it! Anyhow, I'm planning to start this as close to the start date as possible, and it'll be built completely OOB, as I just don't have the skills to start scratch building stuff. So I'm afraid your Flanker purists out there will have to put up with the Kit's (and my) mistakes, as they won't be getting corrected! More pics once the start date is upon us! 2 Link to comment Share on other sites More sharing options...
Valkyrie Posted September 24, 2017 Share Posted September 24, 2017 Great choice, il be following this one 1 Link to comment Share on other sites More sharing options...
DaveJL Posted September 25, 2017 Share Posted September 25, 2017 Another nice entry. 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted September 26, 2017 Author Share Posted September 26, 2017 Thanks lads, looking forward to starting it! 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 1, 2017 Author Share Posted October 1, 2017 So, work on this build starts here: A little un-orthodox, but a fellow modeller I know here in Ireland told me that he always starts his builds with the 'bits', like ordinance, undercarriage etc. He reckons it stops him rushing those bits near the end of the build. And I have to say, I've definitely been guilty of doing that, so I thought I'd take his good advice on-board. So I'll get the ordinance and undercarriage done before I go near the cockpit! Some sink marks to clean up and seam lines etc. as well before I put paint near these... 3 Link to comment Share on other sites More sharing options...
Valkyrie Posted October 1, 2017 Share Posted October 1, 2017 That’s actually a good point, and a great idea! 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 9, 2017 Author Share Posted October 9, 2017 No new pics to share I'm afraid, and not much progress made either; life has conspired to keep me away from the bench this last week. However, the Mr. Paint 'Eggplant' Dark Grey has arrived (and boy does it smell!) and I've just ordered the Decals, so I am getting there! Will hopefully have progress on the ordinance soon, am at the sanding stage (when am I not?!) 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 15, 2017 Author Share Posted October 15, 2017 Just to show that I am making some slow progress, though really this should be two days' work, not two weeks'! Anyhow, here's the Ordinance now, with the white ones painted, the black ones will be done when I prime the airframe: I've also started tidying up the undercarriage, some small sink marks need to be filled: Once I get them cleaned up, I'll get them painted, and then it's off to the cockpit. Thanks... 1 Link to comment Share on other sites More sharing options...
Valkyrie Posted October 16, 2017 Share Posted October 16, 2017 Good tidy start, like this idea too with the ordnance first 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 21, 2017 Author Share Posted October 21, 2017 Well, slow progress, apart from a few touch-ups the ordinance is done: Hoping to get the undercarriage/wheels done this weekend, and then it's on to the cockpit... 2 Link to comment Share on other sites More sharing options...
Valkyrie Posted October 21, 2017 Share Posted October 21, 2017 Nice line up! That would inspire me to fire on and get the aircraft ready to stick those beauties to it! 1 Link to comment Share on other sites More sharing options...
Valkyrie Posted October 21, 2017 Share Posted October 21, 2017 How do you paint your rings on the weaponry? It’s very neat 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 21, 2017 Author Share Posted October 21, 2017 Just Tamiya tape, though it was a little awkward as both red lines are on sloped parts of the bomb, so keeping the tape straight wasn't easy. So it's not actually as neat as I'd like! 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 25, 2017 Author Share Posted October 25, 2017 A little bit more done tonight, and the undercarriage is basically done: So now it's on to the cockpit, woohoo! 3 Link to comment Share on other sites More sharing options...
Valkyrie Posted October 26, 2017 Share Posted October 26, 2017 Good work, must be a great feeling starting the cockpit knowing you have already aced the ordnance and undercarriage and just needs added 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 26, 2017 Author Share Posted October 26, 2017 Not sure if I’d call it ‘aced’, the paint job on the Tyres especially needs to be improved! But it is nice knowing that they’re done, hopefully the main fuselage will go together smoothly... 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 30, 2017 Author Share Posted October 30, 2017 Cockpit is done and ready to be glued in to the fuselage. It's not great, but it'll do for 1:72, especially as the canopy won't be open. The seatbelts are just Tamiya tape: Once the cockpit is glued in and dry, I can look at gluing the top and bottom fuselage halves together. Hoping to get a couple of evenings at this over the next week, so some progress should be made! 2 Link to comment Share on other sites More sharing options...
Jasonb13 Posted October 30, 2017 Author Share Posted October 30, 2017 A couple more pics! Firstly, the cockpit in now in place, here it is in the upper fuselage: And then I did a dry-fit of the airframe to check the CoG, and it shows how big this is in 1:72. Remember, it's on an A3 cutting mat: Such a beautiful aircraft I think, and I love the flattened nose, it reminds me of the Blackbird. Thankfully, that long nose and the wheels being so far back in the airframe means it's nose heavy, even with the stinger, so no weight is needed. I've started gluing the fuselage halves together now... 3 Link to comment Share on other sites More sharing options...
Valkyrie Posted October 31, 2017 Share Posted October 31, 2017 Looking great, clean work. Link to comment Share on other sites More sharing options...
Jasonb13 Posted November 4, 2017 Author Share Posted November 4, 2017 Another little bit done, the start of a lot of filling and sanding I reckon! Got the undercarriage tidied up a bit too and all done. Hoping to get the wings on next/tails on next, and also mask the canopy. 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted November 5, 2017 Author Share Posted November 5, 2017 So, a quick question, does anyone know what colour paint should be inside the intakes? I don't mean the entrance of the intake, which will be the same colour as the underside, I mean further in. I'm struggling to find pictures that don't have Intake covers on them. Thanks... Link to comment Share on other sites More sharing options...
Jasonb13 Posted November 5, 2017 Author Share Posted November 5, 2017 Actually, scratch that question. I found a pic that I'm fairly certain is of the intake of a Su-34, and it shows the underside colour going quite the way in. Considering there's no detail in the intakes of this kit, not even a compressor fan, I'm just going to paint the inside of it black and then put the underside colour in a good way, it'll do the job... Link to comment Share on other sites More sharing options...
Jasonb13 Posted November 5, 2017 Author Share Posted November 5, 2017 Another little bit done... I think I can get away with leaving the horizontal stabilisers and canards off until after painting, but there's still a lot of filling/sanding to do. Just look at the trenches under the wings, running alongside the wheel wells! Still have to get to the canopy as well... 1 Link to comment Share on other sites More sharing options...
CurrantBunbury Posted November 5, 2017 Share Posted November 5, 2017 (edited) Always nice to see someone building out of the box, and this looks like a cracking build so far. You're a bit hard on yourself, I think - I wish I could do cockpit detail like that at 1/72! I also think doing the ordnance and undercarriage first is an interesting idea. As Valkyrie said, I like the thought of knowing you've already got all that faffage done when you come to finish off the aircraft itself. I look forward to watching this one develop. Edited November 5, 2017 by CurrantBunbury 1 Link to comment Share on other sites More sharing options...
Jasonb13 Posted November 13, 2017 Author Share Posted November 13, 2017 Thanks a lot CurrantBunbury. I tend to prefer building out of the Box, as I don't have the skills for scratch building! Got the canopy on, most of the trenches are taken care off, and I've used white primer to paint the nose and tail fins etc. Gonna mask them off, and then the black primer on the whole airframe will be next... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now