Mike Posted September 6, 2017 Share Posted September 6, 2017 Yak-28P Firebar Upgrade Sets (Bobcat Model) 1:48 Eduard The 1:48 Firebar snuck onto the market from Bobcat Model, which is the new name for Xuntong Model. It has no doubt pleased many a Soviet aviation fan, as kits in this scale have been expensive and of the multimedia variety, which puts off a great many potential purchasers. Eduard's new range of sets are here to improve on the kit detail in the usual modular manner. Get what you want for the areas you want to be more of a focal point. As usual with Eduard's Photo-Etch (PE) and Mask sets, they arrive in a flat resealable package, with a white backing card protecting the contents and the instructions that are sandwiched between. Interior (49841) Two frets are included, one nickel plated and pre-painted, the other in bare brass. A complete set of new layered instrument panels and side consoles are the primary parts on the painted set, with new rudder pedals; ejection seat details; coaming instrumentation and canopy internal structure also supplied. Zoom! Set (FE842) This set contains a reduced subset of the interior, namely the pre-painted parts that are used to improve on the main aspects of the cockpit, as seen above. Whatever your motivations for wanting this set, it provides a welcome boost to detail, without being concerned with the structural elements. Seatbelts STEEL (FE841) In case you don't already know, these belts are Photo-Etch (PE) steel, and because of their strength they can be etched from thinner material, which improves realism and flexibility in one sitting. Coupled with the new painting method that adds perceived extra depth to the buckles and other furniture by shading, they are more realistic looking and will drape better than regular brass PE. As well as the two sets of crew belts, you also get a set of the unusually placed pull-handles either side of the pilot's knees that gets him out of there in case of an emergency. Exterior (48927) This larger bare brass set contains some important upgrades, such as delicate new afterburner rings, with scrap diagrams showing how they should be arranged; an interior surface skin for the area near the rear face of the engine that is rolled and slots inside the trunk; an upgrade to the detail in the bicycle landing gear and the wingtip out-rigger wheels, along with some bay enhancements. Masks (EX556) Supplied on a sheet of yellow kabuki tape, these pre-cut masks supply you with a full set of masks for the canopy, with compound curved handled by using frame hugging masks, while the highly curved gaps are in-filled with either liquid mask or offcuts from the background tape. In addition you get a set of hub/tyre masks for all the wheels (including the out-riggers), allowing you to cut the demarcation perfectly with little effort. Review sample courtesy of 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now