keefr22 Posted July 17, 2017 Share Posted July 17, 2017 Any sign of the 15 inch Minilites Mark? Keith Link to comment Share on other sites More sharing options...
mbdesignart Posted July 17, 2017 Author Share Posted July 17, 2017 1 hour ago, keefr22 said: Any sign of the 15 inch Minilites Mark? Keith Yes, will these tempt you to get back to the bench? Link to comment Share on other sites More sharing options...
keefr22 Posted July 17, 2017 Share Posted July 17, 2017 Been fiddling with a couple of things with wings over the weekend, so hopefully some of that mojo stuff might be coming back! K Link to comment Share on other sites More sharing options...
mbdesignart Posted July 17, 2017 Author Share Posted July 17, 2017 I sincerely hope those are wings to keep cars on the ground at speed? A nice 13" Ford RS Ronal arrived in the parcel too, start saving! Link to comment Share on other sites More sharing options...
keefr22 Posted July 17, 2017 Share Posted July 17, 2017 Unfortunately not! I did try out the Le Mans green car touch up paint I got off e-bay to check it was safe on Belkits plastic, so some (very little) progress!! Hmm, will bear the Ronal's in mind if I ever manage to do a replica of my last ever Mk2, a really tidy little Harrier (wish I still had that one, the shell was 100% perfect) - every other Escort I had had Minilites (or copies of same!) Link to comment Share on other sites More sharing options...
mbdesignart Posted July 24, 2017 Author Share Posted July 24, 2017 Almost there... As anticipated getting the body over the tub/chasssis was a heart stopping/blue air few minutes work. Once done what I thought was surface dust is actually trapped inside and visibly attached to the windows and I'm loathe to remove the shell. Other small bits have been frustrating me too, either breaking due to handling or disappearing into the carpet. Only a few odds and ends yet to attach such as mud flaps and the aux rear light. Like Nick Belbin's build I too fashioned some longer boot lid fastners from wire and added a wire pin and loop to the bonnet PE parts. 4 Link to comment Share on other sites More sharing options...
Hamden Posted July 24, 2017 Share Posted July 24, 2017 That is stunning! Roger Link to comment Share on other sites More sharing options...
mbdesignart Posted July 24, 2017 Author Share Posted July 24, 2017 Thanks Roger. The kit nearly got stunned with something heavy and flat after spotting another error. Off with the bull bar, spots and lamp brackets, headlamp protectors and mesh grille as the lamps were set too far outboard. It is becoming less than enjoyable now. The 2nd attempt is now setting...and breathe! On a happier note, today I received a shed load of photos of H1 FEV , the car from the Anniversary rally. My contact was timekeeping on one of the stages and took many close-up shots. The artwork for the stamps should keep me quite for a while. Link to comment Share on other sites More sharing options...
keefr22 Posted July 24, 2017 Share Posted July 24, 2017 I'm with Roger - she's a real stunner Mark!! Keith Link to comment Share on other sites More sharing options...
TonyTiger66 Posted July 24, 2017 Share Posted July 24, 2017 What they both said ! I just caught up with this. What a superb kit, what a superb build of it too.. My third car was an Escort Mk. I. It felt so very modern, so quiet, great gearchange, really nice car. Reg LAL 896K. Obviously not a rally one, but very fond memories, rekindled by this build. TonyT Link to comment Share on other sites More sharing options...
mbdesignart Posted July 25, 2017 Author Share Posted July 25, 2017 Thanks for the comments. I've rectified the lamp bar issues and all is back together again. Scratch mudflaps added from black plasticard, front corner flaps are the kit offerings reshaped, although not truly accurate. Other little items now attached, so bar a bit of touching in here and there this is it for this one. I'm planning a small display base and a light weathering. The photos below are more of a reference to indicate positioning of decals and ancillary items. Finished build pics will be in the RFI section erelong. 5 Link to comment Share on other sites More sharing options...
keefr22 Posted July 25, 2017 Share Posted July 25, 2017 Lovely job Mark! The piccies look like a studio photoshoot of the real thing for the late lamented 'Cars and Car Conversions' magazine...!! Keith Link to comment Share on other sites More sharing options...
Nick Belbin Posted July 26, 2017 Share Posted July 26, 2017 Looks superb, Mark. As iconic a Ford as the Gulf-liveried GT40. I know it's been a challenging kit and a lot of hard work has gone into it but the satisfaction from completing it is immense. I think I'll have to do this car as well now - that makes four Mk1s to do! Are you going to Telford? If so, please bring along one of your upgrade kits for this car . . . Nick Link to comment Share on other sites More sharing options...
mbdesignart Posted July 26, 2017 Author Share Posted July 26, 2017 Thanks Keith and Nick. I'll most likely be at Telford wandering around as usual. As mentioned I'm collecting info for H1 FEV so could that be five Nick? Mark Now back to the Transit chassis... and the Panigale... Link to comment Share on other sites More sharing options...
Nick Belbin Posted July 26, 2017 Share Posted July 26, 2017 5 hours ago, mbdesignart said: Thanks Keith and Nick. I'll most likely be at Telford wandering around as usual. As mentioned I'm collecting info for H1 FEV so could that be five Nick? What are you trying to do to me????? Link to comment Share on other sites More sharing options...
rs2man Posted July 26, 2017 Share Posted July 26, 2017 On 17/07/2017 at 3:57 PM, mbdesignart said: I sincerely hope those are wings to keep cars on the ground at speed? A nice 13" Ford RS Ronal arrived in the parcel too, start saving! What width are the RS alloys ? 6 , 7 or 7.5 inch ? John Green Nantwich , Cheshire Link to comment Share on other sites More sharing options...
mbdesignart Posted July 26, 2017 Author Share Posted July 26, 2017 48 minutes ago, rs2man said: What width are the RS alloys ? 6 , 7 or 7.5 inch ? John Green Nantwich , Cheshire PM sent Link to comment Share on other sites More sharing options...
pau10wen Posted May 11, 2018 Share Posted May 11, 2018 One of my favourite rally cars One of my favourite vehicles full stop! I can almost hear that engine screaming I have this kit in the stash waiting for a start-slot Absolutely fantastic bulid and beautifully clean finish! Inspiring! Link to comment Share on other sites More sharing options...
mbdesignart Posted May 11, 2018 Author Share Posted May 11, 2018 Thanks for the comments. I'm working on the 25th London-Mexico Anniversary scheme for the Mikkola/Palm car which should make a neat pair of book ends. Link to comment Share on other sites More sharing options...
mbdesignart Posted April 29, 2022 Author Share Posted April 29, 2022 UPDATE Don't you just love Facebook 🤔 Following some feedback and further research it has come to light that the scheme I have done above is as the car appears in the Heritage collection. The car on the event had slightly different and addtional sponsor decals. Well now I've corrected that and done a further four iterations. Beginning with the car as it appeared on the start line, two verions with additional decals applied at different stages en-route and the car for the post race photo shoot when 'FINLAND' appeared across the bonnet. 9 Link to comment Share on other sites More sharing options...
Noel Smith Posted May 2, 2022 Share Posted May 2, 2022 Nice Mk1 Escort. This thread has made interesting reading despite not being able to open the majority of pictures on my tablet. Well now Belkits! You brought out one of my wishes, a Metro 6R4. Next one, a Mk1 Lotus Cortina perhaps? It's one of those cars in dire need of kitting in road, race and rally versions, and am sure it would be a really good seller. 1 Link to comment Share on other sites More sharing options...
mbdesignart Posted May 3, 2022 Author Share Posted May 3, 2022 On 5/2/2022 at 9:15 AM, Noel Smith said: Next one, a Mk1 Lotus Cortina perhaps? It's one of those cars in dire need of kitting in road, race and rally versions, and am sure it would be a really good seller. There is a resin kit available, and rumours of more to come in the next few monthes. Decal schemes and resin detail sets are out there too. Link to comment Share on other sites More sharing options...
Noel Smith Posted May 3, 2022 Share Posted May 3, 2022 I know of two resin kits of the Lotus Cortina Mk1. There was a kit issued by someone in South Africa I believe a number of years ago. I guess long out of production after a limited run. The other I know of in 1/24th scale also is produced by Rod and Ian Knott who run the Motor Museum In Miniature. One of the South African models is in their museum collection that has been around the shows and may have inspired them to kit one themselves. Incidentally, they also make a Morris Minor kit in resin. MB? Aren't you on the MotoBitz website? I guess that you have your ear to the ground better than most of us if more Mk 1 Lotus Cortinas are about to hit us. Link to comment Share on other sites More sharing options...
Toftdale Posted May 3, 2022 Share Posted May 3, 2022 Your Escort looks fantastic, but I still can't work out what the mystery sponsor stickers is 🤬 - Andy Link to comment Share on other sites More sharing options...
mbdesignart Posted May 4, 2022 Author Share Posted May 4, 2022 11 hours ago, Toftdale said: Your Escort looks fantastic, but I still can't work out what the mystery sponsor stickers is 🤬 - Andy Thanks. It is a faithful representation of all those fuzzy photos.😂 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now