ConorC Posted September 5, 2024 Posted September 5, 2024 7 hours ago, David Hadland said: Yes it is I paid £70 for mine and as I said it was cheaper to get it from the US. Most sellers in the UK wanted between £80-£90 for their kits (on ebay) So it may be worth your while seeing if you can get the kit from the US the kits are cheaper its just that the P+P is expensive. I did it Dave. I couldn't resist. I picked one up for €80 including postage on eBay. 1
David Hadland Posted September 5, 2024 Posted September 5, 2024 2 minutes ago, ConorC said: I did it Dave. I couldn't resist. I picked one up for €80 including postage on eBay. Yes the kit is pretty hard to resist It will go well with my D-7's one in 1/537 and one in 1/1000 Now if only there were Breen or Jem'Hadar model kits around 1
Yg Models Posted September 6, 2024 Posted September 6, 2024 19 hours ago, FG2Si said: I need to get a coat of primer on to better see the results. not print some aliens for it to drive over first? 😝
whitestar12chris Posted September 6, 2024 Posted September 6, 2024 A good few weeks of stash building at reduced prices, 1) Pegasus 1/35 Ariel Hunter Killer from Terminator 2 2) Meng Han Duoduo and Liu Qi figures from Wandering Earth 3) Revell Kazon fighter 4) Revell 1/106 Imperial shuttle Tydirium 40th Annivesary box 5) Bandai Obsidian Fury from Pacific Rim Uprising to go with my Bracer Phoenix and Gypsy Avenger final battle kits 6) Revell Bobba Fetts starship (Slave 1) book of Bobba Fett boxing 7) Revell 1/120 Darth Maul's Sith Infiltrator 25th Annivesary box and Revell 1/65 Outland Tie fighter Also just ordered an early christmas present to wrap up, Meng 1/72 Harkonnen Ornithopter All the best Chris 2 1
David Hadland Posted September 11, 2024 Posted September 11, 2024 (edited) Postie delivered parts 2 and 3 of Warhammer 40K Combat Patrol You can't see it very well but the free gift was a sprue cutter with a plastic trimmer, the trimmer being made out of metal just to clarify Edited September 11, 2024 by David Hadland added information 1
Mike Posted September 11, 2024 Posted September 11, 2024 Got this in t'post today. Is it Sci-Fi? Prolly. I've also got the Spiny and T-Rex from the same range. They're nice kits 5 1
Corsairfoxfouruncle Posted September 11, 2024 Posted September 11, 2024 1 hour ago, Mike said: Got this in t'post today. Is it Sci-Fi? Prolly. I've also got the Spiny and T-Rex from the same range. They're nice kits Especially if you do a “Jurassic park” themed build.
gunpowder17 Posted September 17, 2024 Posted September 17, 2024 Very rare Lasse Henning 1/18 Darth Vader Tie X1 and a Warp 28inch wingspan Bird of prey. The Tie in particular is HUGE!!!! 4
David Hadland Posted September 18, 2024 Posted September 18, 2024 Got this in post today Klingon Vor'Cha Battlecruiser this is the 2nd one I've got it was a bargain at £10 so I just had to get it I'll include this here as mad max was sci-fi 5
Reelyator Posted September 21, 2024 Posted September 21, 2024 I must admit i did not even start my 1/72 Arthreides Ornithopter, when this came in today. The Harkonen Ornithopter from Meng. I wonder if anybody has thought about lighting this kit like displayed on the box artwork. At first glance at last the larger light housings at both sides of the cockpit could be large enough for a 3 mm LED.... 5
Reelyator Posted September 21, 2024 Posted September 21, 2024 On 17/09/2024 at 22:59, gunpowder17 said: Very rare Lasse Henning 1/18 Darth Vader Tie X1 and a Warp 28inch wingspan Bird of prey. The Tie in particular is HUGE!!!! ....pictures PLEASE!
gunpowder17 Posted September 21, 2024 Posted September 21, 2024 Here you go. next to my 1/48 x-wing cockpit so far 9
Corsairfoxfouruncle Posted September 21, 2024 Posted September 21, 2024 I hate to ask @gunpowder17 but what does something like this cost ?
gunpowder17 Posted September 21, 2024 Posted September 21, 2024 I bought this kit for around the £300 mark , it was actually cheap for what it is. 1
David Hadland Posted September 27, 2024 Posted September 27, 2024 It's been a while so some catching up to do Just got these 2 today These are the Necrons I've gotten over the past week or so And these are the Astartes I've brought as well 2
johndon Posted October 3, 2024 Posted October 3, 2024 This arrived today, a 3D printed 1/350 scale kit of the USS Enterprise XCV 330 as seen in the rec room on the Enterprise in The Motion Picture and in Admiral Marcus' office in Into Darkness. 3
David Hadland Posted October 7, 2024 Posted October 7, 2024 Got issues 4, 5 and 6 of Combat Patrol today.
Kallisti Posted October 13, 2024 Posted October 13, 2024 (edited) Acquired this yesterday... Its a decent size, not too small, not too large... and even comes with a miniature Space Clipper: This will go well with the kit still in my stash of the 1:72 Space clipper along with my existing builds of the older 1:200 scale space clipper and the Aries 1B Edited October 13, 2024 by Kallisti 10
David Hadland Posted October 14, 2024 Posted October 14, 2024 On 10/13/2024 at 3:29 PM, Kallisti said: Acquired this yesterday... Its a decent size, not too small, not too large... and even comes with a miniature Space Clipper: This will go well with the kit still in my stash of the 1:72 Space clipper along with my existing builds of the older 1:200 scale space clipper and the Aries 1B They look very nice, If they are not that expensive I must just get me some of them. Here's what the postie brought me in the last week Citadel Water Paint Pot Citadel Paint Pot Holder Came with a nice medallion as well And a Citadel Miniature Painting Handle 1
FG2Si Posted October 16, 2024 Posted October 16, 2024 My first MaK kit. Got it on a Thanksgiving sale this past weekend. 4
FG2Si Posted October 19, 2024 Posted October 19, 2024 For all the Gundam kits that I've built, I've never actually built one of the original, so I finally picked up a model of one. It only came with stickers so I've ordered a set of decals for it. 1
David Hadland Posted October 19, 2024 Posted October 19, 2024 Postie brought me a fair number of Necrons today I got a Canoptek Doomstalker, A number of pre-built Scarab Swarms (they may need repainting) A Frame of Skorpekh Destroyers with a separated Plasmacyte and finally a box of Triarch Praetorians With The Praetorians there were extra Canoptek Scarab Swarms. I also keep getting this Space Marine with a flamer as a free gift, (I've now got 5) can anyone tell me who he is? Thanks in advance 3
Yg Models Posted October 21, 2024 Posted October 21, 2024 (edited) On 10/17/2024 at 5:46 AM, FG2Si said: My first MaK kit this is a nice kit, just the gaps & level difference are quite big. FYR On 10/20/2024 at 12:19 AM, FG2Si said: It only came with stickers so I've ordered a set of decals for it yes, poor bandai, 95% would separate water decals from kit to earn extra 🤬 this blog could help you check where need to treat: http://www.dalong.net/reviews/mg/m172/m172_p.htm Edited October 21, 2024 by Yg Models 1
David Hadland Posted October 21, 2024 Posted October 21, 2024 Just got this Warhammer 40,000 Imperium Number 23 Which has a Complete Necron Canoptek Spyder 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now