Jump to content

1/18 Ferrari F40's, LM, GT and IMSA


Recommended Posts

Not a lot of diecast projects on this forum. How about I show you guys this little groupbuild (11 Bburago's and 1 Hotwheels Elite) that I'm working on ?

Here we go :

The 1/18 Bburago model :

Ferrari%20F40%20LM%20001.jpg

Two of the 12 will be build as these :

f40_1.jpg

P000Fade.jpg


I started with an all-out attack with my Dremel on the chassis :


26052013%20(1).jpg

26052013%20(2).jpg

First try :

26052013%20(4).jpg

Second try :

26052013B%20(2).jpg

Third try (and it didn't end there) :

02062013%20(1).jpg

02062013%20(2).jpg

02062013%20(3).jpg

I'm cutting the rear chassis to get rid off those ugly metal tubes that hold the screws. The suspension and rear frame will be scratchbuild to resemble that of a real F40.

The engine/gearbox look awful, to the left is that of the Hotwheels LM, not much better :

Ferrari%20F40%20LM%20006.jpg

The goal is to make it look like this :

P016Web.jpg

I bought a Kyosho F40 and took it apart. Some parts will be copied for my F40 LM's.

The cockpit needs some changes :

Ferrari%20F40%20LM%20004.jpg

I cut the floor out and filled some holes with plasticard :

26062013%20(3).jpg

I sanded the firewall and made a center console (tunnel) :

27072013%20(6).jpg

The front chassis looks like this :

27072013%20(1).jpg

The Hot Wheels version is almost the same, but is has a radiator :

27072013%20(2).jpg

First step is to remove the overscale metal :

27072013%20(3).jpg

The plastic parts get the same treatment :

27072013%20(4).jpg

So everything can be rebuild :

27072013%20(5).jpg

At least that is what I had planned at that stage. Later on you will see that the chassis will be modified a lot more.

Sincerely

Pascal

  • Like 2
Link to comment
Share on other sites

Interesting stuff Pascal, those are some big chunks of metal you're working with there - especially if you're doing 12 cars! I started modifying a 1/24 diecast Mk1 Escort a few years back, but didn't get far as it was too much like hard work! Looking forward to seeing what you do with these!

That silver car is simply gorgeous!

Keith

Link to comment
Share on other sites

Thanks for the reply.

Update.

I cut the front part of the chassis, and rebuild it with brass and plasticard :

06082013%20(1).jpg

Left side has received the diagonal piece of plasticard :

06082013%20(2).jpg

It's strong enough to support the weight of the hood :

06082013%20(3).jpg

Dryfit with the other parts :

06082013%20(4).jpg

06082013%20(5).jpg

It's not finished, but there's already a big difference with the original Bburago chassis :

06082013%20(6).jpg

Then I decided to make the front part of the frame out of brass tube :

20092013%20(1).jpg

20092013%20(3).jpg

20092013%20(2).jpg

Took me a couple of hours to find the right dimensions, but it will save me a ton of putty / sanding work.

I wasn't satisfied with the way I made the front part of the frame. So I replaced all the plastic tubes with brass tubes.

Before :

27092013%20(4).jpg

After :

27092013%20(3).jpg

Not much is left of the original Bburago frame :

27092013%20(2).jpg

27092013%20(1).jpg

  • Like 3
Link to comment
Share on other sites

Interesting stuff, Pascal, and a nice change from all the resin and polystyrene we usually see. Thanks for sharing!

Edit: Maybe I should look at my 1/18 Lotus Elise and make it more like the real thing!

Edited by injidup
Link to comment
Share on other sites

Thanks for the replies

How do you join brass to zamac Pascal?

I use CA or a steel reinforced epoxy called J-B Weld.

Update :

I made another version (3 bis) with a copper plate soldered to the brass tubes :

17102013%20(1).jpg

But then I wondered if the tubes were the right scale, the answer was : NO. So I bought smaller brass tubes, and after a day's work this is the result :

17102013%20(2).jpg

17102013%20(3).jpg

The other 5 Bburago frames will get the same treatment, as will the frame from Hotwheels Elite F40 LM.

I added a few details to the first chassis :

19102013%20(1).jpg

19102013%20(2).jpg

And drilled a small hole in the 2 brass tubes.

Reference picture from Ferraris-online :

P040Web.jpg

The shape is a little different, this will be alterd with the other chassis :

19102013%20(3).jpg

I made the first cuts in the front hood :

19102013%20(4).jpg

Using a resin one from legende-miniatures as a reference :

19102013%20(5).jpg

Fifth and final version of the frame. The rectangular brass tubes will be replaced by ones that are 1 mm higher. Makes them look less wide and looks more like the real F40LM. Version 5 is the one on top :

25102013%20(2).jpg

25102013%20(1).jpg

After hours and hours spent looking at the pictures and drawings of the frame of the real LM, this is what I came up with :

04112013%20(3).jpg

The rectangular brass tube is now a little wider, the frame on top is before the modification :

04112013%20(6).jpg

The rectangular brass tube is now a little longer towards the back :

04112013%20(7).jpg

Normally the copper plate should be where the rectangular brass tubs ends. To do this I would have to rebuild the zamac part of the frame and also the front of the windscreen, but since the copper plate will no longer be visible from the side when the build is finished, I will leave it in place :

04112013%20(8).jpg

I used a file to shape the middle part of the rectangular tube in a diagonal form, just like the real LM. The U-shape supports will be added to the left and right of the diagonal form :

04112013%20(4).jpg

04112013%20(5).jpg

Sincerely

Pascal

Edited by Pascal
  • Like 1
Link to comment
Share on other sites

  • 2 months later...

It's been a few weeks, but here's an update. This is the result of a lot of hours of testing, modifying, dryfitten, etc.

17122013%20(1).jpg

17122013%20(2).jpg

17122013%20(3).jpg

The white piece of plasticard needs more work :

17122013%20(4).jpg

17122013%20(5).jpg

Sincerely

Pascal

Link to comment
Share on other sites

  • 6 months later...

Update :

 

23122013%20(4).jpg

 

23122013%20(1).jpg

 

23122013%20(2).jpg

 

23122013%20(3).jpg

 

Modification in 3 steps.

 

Step 1 :

 

01112014%20(1).jpg

 

Step 2 :

 

01112014%20(2).jpg

 

Step 3 :

 

01112014%20(3).jpg

 

The plasticard triangles become very fragile after the shaping, they will be reinforced with CA and flour.

 

Most of the work that I've done involves removing unwanted metal and filling gaps and holes.

 

First one is this tube that holds the bonnet in place :

 

12042015%20(1).jpg

 

This was removed with my Dremel and a coat of putty was applied to show where further sanding is needed. The damaged to the louvers will be repaired :

 

12042015%20(4).jpg

 

The rear spoiler has a hole on both sides :

 

12042015%20(2).jpg

 

This was filled with CA and flour and sanded. The rectangular holes are for the extra light for the american version of the F40 :

 

12042015%20(5).jpg

 

The inside of the spoiler has a lot of unwanted metal :

 

12042015%20(3).jpg

 

This was sanded down (this is the spoiler of the GT version , that's why the central part with the louvers has been cut out) :

 

12042015%20(6).jpg

 

The central part of the body received a couple of plastic strips  :

 

12042015%20(9).jpg

 

12042015%20(7).jpg

 

This will help the central part and cockpit adhere to the chassis :

 

12042015%20(8).jpg

 

This little brass tube will fit into a hole that I drilled in the lower part of the body :

 

12042015%20(10).jpg

 

The bonnet also has holes on both sides :

 

12042015%20(13).jpg

 

12042015%20(14).jpg

 

These were filled with a piece of plasticard :

 

12042015%20(12).jpg

 

Glued with CA and flour and sanded to shape :

 

12042015%20(11).jpg

 

Finally the rear spoiler received some plastic strips to help the bonnet align with the spoiler :

 

12042015%20(15).jpg

 

The plastic strip needs some more work to get it right. Hopefully it will help to get a good fit between the rear spoiler and the bonnet.

 

If not, tiny magnets will be fitted into the rear spoiler.


Please feel free to comment.

Sincerely

Pascal

Edited by Pascal
Link to comment
Share on other sites

  • 3 years later...

I finally put this project back on the modelling table.

 

Nine of my 11 Bburago F40's will go to the production process. Some pics of the F40 graveyard  :

 

8ee1b73cce547b231db7000a26baf038.jpg

 

42ed6042b9664dafad441c8672ebdc26.jpg

 

A couple of years ago a friend of mine made about 30 of these with his CNC milling machine :

 

d2144adc4c035205dff5324c36346fe8.jpg

 

The goal is to make a frame like this one from a Kyosho F40 :

 

57a64ddf6d297a29306eff4262f60ad1.jpg

 

That's were this project got stuck. I had no idea how to turn those A's into a frame, untill about a week ago : TATAAAA, I have an idea. First step : glue a piece of plasticard - in a shallow angle - on top of the frame :

 

de370be243c01f63e6385376f1fc9578.jpg

 

Step 2 : connect the A's with some scrap plastic :

 

885aa9aa8fe557b2a71aed9d97758688.jpg

 

First dryfit shows that there's some tweaking left to do, but the idea seems to work :

 

f5ca0797e618ad82e41bdcc58715f0d5.jpg

 

The Kyosho will serve as a donor for a lot more parts, here's a couple of them  :

 

bd803e0622f8bf47e9ba6c9b9c9a80cd.jpg

 

Sincerely

 

Pascal

  • Like 4
Link to comment
Share on other sites

Wow Pascal this is some project you have going here. That's a good bunch of them! If I may ask, is there a reason you're doing so many? Or is that just the old "because I can" modelling thing? 🙂 

  • Like 1
Link to comment
Share on other sites

2 hours ago, JeroenS said:

Wow Pascal this is some project you have going here. That's a good bunch of them! If I may ask, is there a reason you're doing so many? Or is that just the old "because I can" modelling thing? 🙂 

Hi Jeroen, there's a number of reasons why I'm building between 9 and 11 F40's at the same time. First of all the Bburago model is very cheap, I originally wanted to modify a couple of Kyosho F40's, but they go for crazy prices. Second, though the Bburago model is a decent model for its age, it's also bad in some areas, so that leaves a lot of room for improvement. Third, I'm 100% sure that when I'm done with these Bburago F40's, I'm never gonna touch one again, so it's basically : build them while I can.

 

Sincerely

 

Pascal

  • Like 2
Link to comment
Share on other sites

I was thinking with 9 swings I'd get one hit.  I'm sure you'll have a much higher hit percentage.  Daunting, but cool project. 

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

Been very busy the last week. Everytime that I modifie a piece, the same has to be done to the other 8 Bburago F-40's.

 

My workbench is littered with parts :

 

9148e7629b324fe44c2e2e3fea947ac7.jpg

 

I removed about 5mm from the front part of the frame. Before :

 

296a397a534c0496a4de56e358776c31.jpg

 

After :

 

6209e01647855d5f9fb8fce7a21a0aae.jpg

 

I finally cut all the struts from a U-shaped brass profile. Took me couple of hour. Sorry for the lousy picture  :

 

d5959494731ab522e0ec69d04400e8c0.jpg

 

The struts are sanded on the top, so that the piece of plasticard fits nicely :

 

697de53e3c5528b5f278d452be0277c9.jpg

 

I'm using this part from a Kyosho F-40 to make some details that will go on to the back of the piece of plasticard :

 

482389560327f0b978f221a5f865d83d.jpg

 

Kyosho made the air inlet tubes like this :

 

9e26fabd442c897fc26046cc8bb205ae.jpg

 

This is a first test on one of the Bburago frames, I might want the alter the shape of the hole a bit because now the tube gets squashed :

 

19a727f16c1cbdcc9c3a9abc74184156.jpg

 

b02e47e3b1b2726e5e4d1477ac7b7ab3.jpg

 

I hope that the tube will look like this when done :

 

dc56b8eba9e58c2a67e4dd387448f4d7.jpg

 

Sincerely

Pascal

  • Like 5
Link to comment
Share on other sites

  • 3 weeks later...

Hi Hamish,

 

I should be able to post an update in a few days.

 

The grey / silver LM is not a real LM. It has a mix of parts : LM style rear wing, LM style side naca inlets under the doors, LM style naca inlet and big air scoop on the front bonnet, LM style front splitter and headlights but the rest of the front bonnet is GTE style : vents over the front wheels and small naca inlets behind those vents. It is also an F40 fitted with a catalyst, and that is something that I've never seen on a scale model.

 

What the difference between a non-catalyst and a catalyst F40 ? Well first of all the rear frame is different :

 

Non-catalyst :

 

dcaf1a1c906169582dc7cf8ee4072903.jpg

 

Catalyst :

 

33a77cec6e9e1ddc854556cbc90ba0b8.jpg

 

b128da35f166fae417a660f5f8198d60.jpg

 

233145f53626d6d2a025b1bcfc2e4915.jpg

 

There are a number of different versions of the F40 : prototype, street version (with or without variable suspension, with or without catalyst, lightweight and basic version), LM version (IMSA spec and "normal" LM spec) , GT version (with or without catalyst), GTE version and last but not least all the street versions that have been altered in different ways to improve performance but mostly to make them look like an LM, GT or GTE version.

I'll try to make a different topic with pictures to show the different versions.

 

Sincerely

Pascal

 

Edited by Pascal
  • Like 2
Link to comment
Share on other sites

I did a ton of work the last couple of weeks, time for an update.

 

I glued the NACA duct to the front hood, the ducts came out of the part that I cut from that hood to make the large hole for the air inlet :

 

498adea36edaaab9fa6525cd074a9f6f.jpg

 

The BBurago hole for the headlights :

 

c8f3792041140bc3c2f6dbdcb7a3a227.jpg

 

I made these bigger for the LM and IMSA versions :

 

aab7766d0a887e6d1206339785a5584e.jpg

 

Before and after family photo :

 

af8da16510f4bc0b8de77c6f72225b40.jpg

 

Started with this Bburago part :

 

7d2e30ea5c9c6b1d21b9fa6ae8388235.jpg

 

d0f897639785c794cb0807ce00af5e10.jpg

 

I removed the grills, tubes and some plastic from the rounded area to the back, and started boxing in the new bigger holes :

 

96dcf5d262bbeb2074a1cb0a4321651e.jpg

 

27ecf5e0788471483256a7d473a53363.jpg

 

Dryfit :

 

5a0e90b0cae2c3bc7db890062a37960f.jpg

 

These parts were 3D-printed. The red louvres are for the GTE version, these were drawn and printend by a belgian friend. The black louvres are for the IMSA version, these were drawn and printend by an italian friend :

 

b99b31825ef4bef9aef2ab52a141e6b3.jpg

 

Dryfit with the red louvres and NACA ducts :

 

20b0f7bb4bf360196a2cf992fa97f3d8.jpg

 

76a074c84eb7b70b602a9c56f6b376a1.jpg

 

Dryfit with the black louvres :

 

8cf69258fbe8e726854f0f7453e565ae.jpg

 

6e4b7e3369ee6caba1c6c561a45d47ac.jpg

 

These need a bit more sanding, luckily the dimensions and especially the height are perfect :

 

6d3001a2ae290397839053123c09d569.jpg

 

Made a hole and glued in the NACA ducts on the sides of the body (LM, GTE en IMSA versions) :

 

aa0314a20f9939af48c82fb62109f5ca.jpg

 

These tubes were printed in Italy :

 

704dc56a3c4c93ad002448ab349ec5aa.jpg

 

6b812b30680a82ad54e74af17743d302.jpg

 

As were these U-shaped brackets that hold the suspension arms. I ordered 100 of these :

 

3dfda377e7c969d810007e1dfb1ca3d1.jpg

 

3e6275a8127c613b0ed63d6c97669cba.jpg

 

Back to the tubes. The first one is glued into the frame and some putty has been smeared to plug the gaps. Needs a little sanding, but it's a major improvement to the first version that I made with the green plastic tubes :

 

257bc988dc116400b3c565e6b713a009.jpg

 

One side of the tube is more round then the other, just like with a 1/1 scale F40 :

 

8fd69207ae7dcfc1f17c66d3ed8870ba.jpg

 

These are the headlights of the Hotwheels F40 :

 

0179949e6eb1238639cedda429962c76.jpg

 

These are headlights from Legende Miniatures :

 

50a6074cf90170647108e5d132c6eabf.jpg

 

The look OK, but they dont have the depth of real headlight. I made these with the lathe. The macro-photo has each of them look a bit different, with the naked eye they all look the same. The first one took a couple of hours to make, now it takes about 20 mins to make 1 headlight  :

 

978516570ae86bfbfdc7b54fb14f58d1.jpg

 

In this photo the left one has a round piece of clear plastic. I will use thicker sheet cause it's barely visible :

 

d44c181f8fad6680872310db7f713901.jpg

 

Used the lathe to turn the BBurago tires into slicks :

 

40867874be336e19f17bb4d585a1ca81.jpg

 

Some light sanding is still needed and the sides need to be rounded :

 

2a2fd3550ee414a4ecab5c5fd1103d90.jpg

 

That's it. Next update will have to wait a few months, because I have to repeat all the modifications to the other 8 F40's.

 

Till next time

 

Pascal

  • Like 4
Link to comment
Share on other sites

Staggering and brilliant work Pascal. I hope you visit again before two months because I have two questions:

I'd guess by color that your filler of choice for the zamac is J-B Weld. ?

What is your tool(s) of choice for cutting out slots and holes in the zamac body?

Huge wonderful project...:worthy:

EDIT: I see you answered my guess about the filler earlier on - thanks again for that.

Edited by Codger
  • Like 1
Link to comment
Share on other sites

Hi Codger,

 

I use these cutting disks :

 

spacer.png

 

They don't shatter like the standard cutting disks. If you use them a low speed they cut slowly through the zamac. If you use them at high speed, they wear out quickly and the diameter becomes smaller. That last thing is an advantage because you get all kind of diameters for small cuts.

 

After the initial cuts with the disks, I use one of these to shape the slots and or holes :

 

spacer.png

 

The final shaping is done with files.

 

Sincerely

 

Pascal

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...