Jump to content

Fw 190A-5 Eduard 1/72 "Ended"


Recommended Posts

Hi All

There are too GB that I like: Great patriotic war, Fw 190, Airliner III, MTO...........its impossible to do all !

Anyway I'll try, after Great patriotic war I'll start this Fw 190 GB, is right opportunity to build new Eduard 1/72 kit; I've an A-8 profipack, an A-5 still profipack and an A8-R2 weekend.

I'll do the A5, but I I'm undecided for version: W.Novotny's plane or the machine of H.Graf ? the first have a simple camouflage but with one russian green used, the second is most colored as marking (red tulip)........I should like to know your opinion, are two nice versions, I am very attracted to the version of Nowotny, for to the right historical research on green,german and russian........

1_Box%20Art_zpsjpzhwynf.jpg

As you see, there are many aftermarket set, but I not used all....

Byeeeeee

:bye: Ettore

Edited by Ettore
  • Like 1
Link to comment
Share on other sites

Oh Thanks Jes !

I love more this airplane and I hope not to disappoint you

Next week I'll in holiday, two weeks, and for a number of various reasons I remain in town

I will devote myself to the modelling, fishing (trolley and spinning) and I'll try the new car on hills around Genova

Ettore

Edited by Ettore
Link to comment
Share on other sites

Hi All

The profipack Eduard's kit are complete and pleasant , but sometimes , we modelers, want to hurt us as masochists; I will try to replace the cockpit of the box with one of Brassin resin.
First I prepared the pieces:

2_Preparazione%20cockpit%20in%20resina_z

Then, knowing my patience, after two hours I gave color, usually RLM 66, a bit 'lightened, soiled with sand near the pedals, and a washing line into the inside corners

3_Colorazione%20cockpit_zpsyaqzzwnn.jpg

3_Colorazione%20cockpit_zpsyaqzzwnn.jpg

4_Colorazione%20cockpit%202_zpsou0kv0ch.

By the way ! I chose the airplane of Walter Nowotny in Russia during 1943

:bye: Ettore

Edited by Ettore
  • Like 5
Link to comment
Share on other sites

I managed to close the fuselage, but

unexpectedly appeared a step which I quickly filled with Mr. Surfacer 1500

5_Fuselage%20closed_zps69zpzh9z.jpg

6_Cockpit%20up%20vision_zpsz0ax6qmk.jpg

I used eduard's tool to give a right angle to the prop, note as resin spinner is smaller of plastic piece

7_Propeller_zpsqrcovlif.jpg

Ettore

  • Like 1
Link to comment
Share on other sites

A nice saturday to all !

I ended to mount wheel bay, then I closed wings and glued at fuselage, not was so easy, but not all kits are perfect

8_Wheel%20bay_zpsdrpyozbo.jpg

I have not spent much time on engine : alluminium, black washing, dry brushing dark grey al silver on vent; note the putty on the edge of the wings.

9_Engine_zpscmuruivg.jpg

Another two pictures with a general vision

10_Putty%20on%20wings%20edge_zpszbrwczxh

11_Wheel%20bay_zpswjikuap3.jpg

Today elbow grease to sanding :weep:

Regards

:bye: Ettore

Edited by Ettore
  • Like 1
Link to comment
Share on other sites

Good evening to All

Other small steps: the coloring of wheel bay

12_Wheel%20bay%20colored_zpsyc25qdk2.jpg

Almost complete the general forms of the kit, missing only the ailerons

13_Forme%20generali_zpsxmy8l7gh.jpg

and finally I replaced the plastic gun with other from hypodermic needles

14_Canne%20in%20metallo_zps2xlbs1ru.jpg

And now, may be tomorrow, start of coloring

:bye: Ettore

  • Like 1
Link to comment
Share on other sites

Hi Jes !

First Thanks

In the notice is clearly indicated that the Nowotny airplane was without bulge (underside) and also in other publications (Jagdwaffe, Im focus, Airframe Album); in the box there are two wing and under sides are with and without bulge (under, for different armaments), here the notice Eduard: http://www.eduard.com/store/out/media/70116.pdf

:bye: Ettore

Link to comment
Share on other sites

Hi All

With little scale I prefer, sometimes, to utilize two or three primers; in this case we have a medium grey for underside, light grey for both laterals of fuselages and a white for upperside

15_Grey%20primer%20underside_zpsxxftaaom

16_Light%20grey%20primer%20sx-dx%20side_

17_White%20primer%20upper%20side_zpsa4jw

It is very important to smoothen surfaces, after half an hour of drying, with a cloth buckskin, even synthetic is okay.

18_Smoothing%20the%20primer_zpshfwb8i6x.

The primers are blue for underside and black for upperside

19_Preshading%20Blue%20underside_zpsj107

20_Preshading%20black%20upperside_zps04f

:bye: Ettore

  • Like 2
Link to comment
Share on other sites

Good Afternoon

The holidays are finish and tomorrow I return to work..................damn! :jealous::bangin::boom:

In these two weeks, however, I think I well have done someting in my kits;

Friday, Saturday and today I engaged only on a part of the camouflage. I started with yellow bands and RLM 76, lightness with a bit of Light grey.......I'll do an airplane very clean

21_RLM%2076_zpsmxb92ooa.jpg

The choice of the lighter of the two greens was more difficult, I do not think that profiles tell the truth, but I have read some articles, contrasting with each other, and decided as follows: the lighter green is a combination of an Olive green and a khaki green of Gunze aqueous.

22_First%20green_zpsskb9rvda.jpg

23_First%20green%202_zpsylaax272.jpg

Some small flou spots of RLM 75 are on the tail

24_First%20green%203_zps3y7hw4cf.jpg

Have you noted how the panels on the wings are clear in the middle? This is the white primer which discolors them automatically,

but with the darker green, RLM 70 Gunze, the effect will be less noticeable.

Bye bye

:bye: Ettore

  • Like 1
Link to comment
Share on other sites

Thanks Allan

This afternoon I sprayed second green, a Gunze RLM 70

25_Second%20%20green_zpsq80zj5tp.jpg

26_Second%20%20green%202_zpshinzlnsq.jpg

Now, coming soon, the great yellow band on fuselage and the camo will be completed.

:bye: Ettore

Edited by Ettore
Link to comment
Share on other sites

  • 2 weeks later...

Hi guys
Some other small step toward ending,

First, I made the big yellow stripe on the fuselage and the spiral of half of spinner,

this spinner is is half RLM 70 and the front half black with yellow spiral

28_Camouflage%20ended%202_zpshpmt3bjp.jp

27_Camouflage%20ended_zpsdzvoahov.jpg

Then I started and finished the detail of trucks

29_Carrelli_zpsicvl2wgv.jpg

and finally one of the most beautiful step: the decals

30_Decals_zps8drr3nfw.jpg

Next time I hope to show you with paneling and matt varnish on surfaces

Take a nice evening

:bye: Ettore

  • Like 4
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...