TimMather Posted June 28, 2016 Share Posted June 28, 2016 looks great so far. Link to comment Share on other sites More sharing options...
Brundledonk Posted June 30, 2016 Author Share Posted June 30, 2016 It's shaping up nicely. Good work. Thanks Rob Slow but steady this build Pete Looking good there. Thanks buddy Pete Link to comment Share on other sites More sharing options...
Brundledonk Posted June 30, 2016 Author Share Posted June 30, 2016 Great paint Pete, its looking very nice Cheers Hunter, I'm pleased with how it's turning out so far Pete looks great so far. Cheers Tim Pete Link to comment Share on other sites More sharing options...
Brundledonk Posted June 30, 2016 Author Share Posted June 30, 2016 (edited) Found some time to work on Dalek Sec's innards today The screen grabs that I have show the inside to be a sort of dark metalic grey but seeing as how Sec will be mostly black I used artistic licence and went with gold for more contrast w I will go back in and brush paint the details I used Alclad pale gold as a base, steel for shading and pale gold mixed with aluminium for the highlight Edited June 30, 2016 by Brundledonk Link to comment Share on other sites More sharing options...
Brundledonk Posted June 30, 2016 Author Share Posted June 30, 2016 (edited) I exaggerated the contrast as its going to be dark inside once Squidward goes in and I want it to show up Everything is just tentatively dry fitted here just to get an idea of how it's going to look Edited June 30, 2016 by Brundledonk 2 Link to comment Share on other sites More sharing options...
Brundledonk Posted June 30, 2016 Author Share Posted June 30, 2016 (edited) And from the back There's going to be filing needed on the panel joins methinks Not too much more to do inside, just pick out the details of the wiring but outside I've still go to mask the head and prime and also there are a ton of hemispheres that need priming / painting and I'm really not looking forward to that bit. But I'll get there in the end I'm sure Pete Edited June 30, 2016 by Brundledonk 3 Link to comment Share on other sites More sharing options...
Tzulscha Posted June 30, 2016 Share Posted June 30, 2016 The Daleks and the base look awesome. I wish now I had snabbed this kit when I had the chance. Bugger. The guy in the respirator looks a little unfinished though, maybe a bit more shading... 1 Link to comment Share on other sites More sharing options...
Brundledonk Posted July 16, 2016 Author Share Posted July 16, 2016 seem to be struggling with the old mojo I'm afraid but I did a little bit more to the Dalek this morning I painted the moulded wires that are on the inside of the Dalek Matt black but it looked a little flat so I went over a little bit with dark grey and then again with light grey ( leaving the underlying colours showing through a bit ) to try and give it some definition and add some depth They looked good in black as the contrast against the gold was very strong but the detail was lost. The grey has helped the details show but I've lost the contrast Link to comment Share on other sites More sharing options...
Brundledonk Posted July 16, 2016 Author Share Posted July 16, 2016 (edited) Got the head masked and primed and everyhting up to the head is now glued . The open panels are a friction fit so I will easily be able remove them for painting the outsides There are gaps where the skirt meets the base and between the panels but I'll fix those when my mojo is up I airbrushed the end of the eye stalk blue then airbrushed a dot of white and masked with a blob of blue tac before painting everyhting black I scratchbuilt the gun from aluminium tube and beading wire but this one is just a place holder as it was just to test the concept and I will make 2 slightly more refined ones when I buld the second Dalek as I think this one is a bit bulky The kit one is moulded in one piece and is very innacurate The kit part for the arm of the manipulator is bit clunky too So seeing as I had the Ali tube out I made a new one Pete Edited July 16, 2016 by Brundledonk 1 Link to comment Share on other sites More sharing options...
Brundledonk Posted July 16, 2016 Author Share Posted July 16, 2016 (edited) I neednt have done much to the interior painting as once Squidward is in place you can't see much of it Before I glued them I. I sprayed german grey around the sockets where the hemispheres go on the lower skirt to help them stand out a bit The top half should be gloss black to match the hemispheres but I didn't think it would look right in scale so I went with satin and just dry brushed a little bit in dark grey to bring out the detail but with hindsight I think the gloss would have worked He does talk and light up ( I'll do a video tomorrow if I get a chance ) EXTERMINATE ! ( unbelievably neither Dalek actually say this ) Managed to chip some paint off one of the tenticles as the vinyl is crap at holding paint Edited July 16, 2016 by Brundledonk 1 Link to comment Share on other sites More sharing options...
Brundledonk Posted July 16, 2016 Author Share Posted July 16, 2016 And with him on the diorama So one Dalek down and one to go ! It will be a little while before I get back to the Other one though as I have to jump into the TARDIS and go back to 1916 and finish of a DH-2 Pete 5 Link to comment Share on other sites More sharing options...
SMD70 Posted July 16, 2016 Share Posted July 16, 2016 This is looking really good. Might inspire me to dig from the shelf of doom my almost finished copy. I both got both Darlek's built although I did close Sec up though... those panels do fit into a closed skirt with a bit of work. I also got some colours on the base although that wasn't finished either. I did stall when I attempted to scratch build new gun arms from sprue and staples... never got anything I was happy with and shelved the kit. Link to comment Share on other sites More sharing options...
S5 modeller Posted July 17, 2016 Share Posted July 17, 2016 Very convincing work on dalek sec. Link to comment Share on other sites More sharing options...
Blastvader Posted July 23, 2016 Share Posted July 23, 2016 Brilliant Pete. I'mnot really a fan of Who but that's some grade A mogglin' right there. Link to comment Share on other sites More sharing options...
Brundledonk Posted July 23, 2016 Author Share Posted July 23, 2016 The Daleks and the base look awesome. I wish now I had snabbed this kit when I had the chance. Bugger. The guy in the respirator looks a little unfinished though, maybe a bit more shading... Thanks mate Its worth keeping an eye out for one as it really is a nice kit and a lot of fun to paint. Yes the face has a few seams that could do with a bit of filler too lol Pete Link to comment Share on other sites More sharing options...
Brundledonk Posted July 23, 2016 Author Share Posted July 23, 2016 This is looking really good. Might inspire me to dig from the shelf of doom my almost finished copy. I both got both Darlek's built although I did close Sec up though... those panels do fit into a closed skirt with a bit of work. I also got some colours on the base although that wasn't finished either. I did stall when I attempted to scratch build new gun arms from sprue and staples... never got anything I was happy with and shelved the kit. Dig it out and finish It as it makes a great display piece with the daleks on the base. Closing Sec up must have been a fair bit of work I imagine. Did you have to do a load of filling ? I tried to use a stiffer wire for the guns but had trouble bending it so went with beading wire and although nice and easy to cut and bend it was very dificult not to bend it out of shape when glueing, I'll try and find something that's a bit more robust when I do the next ones Pete 1 Link to comment Share on other sites More sharing options...
Brundledonk Posted July 23, 2016 Author Share Posted July 23, 2016 Very convincing work on dalek sec. Cheers bud Pete Brilliant Pete. I'mnot really a fan of Who but that's some grade A mogglin' right there. Thanks mate, I'm not much of a fan of the current series but I did enjoy the comeback and earlier ones Pete 1 Link to comment Share on other sites More sharing options...
Brundledonk Posted July 23, 2016 Author Share Posted July 23, 2016 I have finally completed the DH-2 and will crack on again with Dalek Caan. Hope to get some bench time today, but tomorrow I'm off to the Inlaws with the wife and kids for a week so things will grind to a halt again Pete 3 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 19, 2019 Share Posted May 19, 2019 Did you finish the other one? How tall are the daleks? Link to comment Share on other sites More sharing options...
Brundledonk Posted June 27, 2019 Author Share Posted June 27, 2019 On 5/19/2019 at 2:21 PM, DalekCheese said: Did you finish the other one? How tall are the daleks? unfortunately i didnt get the other one finished but he is in the to do pile and i will get back to him eventually they are round about 1/12 scale and i think about 6" tall  Pete Link to comment Share on other sites More sharing options...
DalekCheese Posted June 30, 2019 Share Posted June 30, 2019 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now