Graeme H Posted April 15, 2016 Share Posted April 15, 2016 Well I was surprised when I saw this STGB, I do so love the Hunter, not sure how I missed it. Col let me join in, so off I rushed, started 24 hours ago, and been working on it off and on. The obligatory box and sprue shots Now I kinda rushed into this stirred on by Alex's quick build. This is my first kit for more than 2 years, so made some basic rookie mistakes I didn't set out for any particular scheme, so painted (dark grey) and decaled the cockpit, put the wings together, all last night while watching Australian Rugby league, Parramatta Eels defeat the Many Sea Eagles 22 10. Completed the Starboard wing no problems, but found I had misaligned the port one, managed to it part undone, only about 3 minutes after I put it together, as I use MEK, and it's quick, got it a bit better aligned, but couldn't poo-poo the outer near the aileron, so clamped it up and left it overnight. I'm not a very good photographer, so not really able to see anything here, but it was a bit of a pain, it was about this time I started to think of what I was going to do it as, that's when I realised when I looked through the options, I needed to open some holes up if I was going to an FGA9, bugger, so thought I might do it as a Swiss one, but again if I was going for the Sidewinder option I would need to open up holes, OK, had a look at what decal options I had, and realised if I was going to do this kit as an F6 I would need a different tailplane,(why don't they put both in anyway I will never know), OK, so Belgian it is, I have 2 choices, in that I have the Diables Rouges from Daco, or a standard one from the Revell F6 decal option in the kit, which I will probably go for, those decals do look good. As I said I worked off and on through the day, no more than 2 hours in a go, made good progress, The fuselage together, and the black hole that is the cockpit, will look OK with the canopy closed. After dinner went and did some modelling again watching Australian Rugby League, this time my home team, the current Australian Champions, and World Club Challenge Champions, having beaten Leeds Rhinos 38 4, Again tonight, I decided to model instead of going to the game where we thrashed Russell Crowes' South Sydney Rabbitohs 44 18. I seems watching a game and modelling gives me quite the urge to get stuff done Where I finished tonight SWMBO arrives home tomorrow, but not until late, so might get more done, I have never finished one of these STGB's so really aiming for just the basics, nothing fancy at all. 7 Link to comment Share on other sites More sharing options...
Col. Posted April 15, 2016 Share Posted April 15, 2016 Welcome to the GB Graeme. Seems we're going to be treated to a couple Hunters in the gallery before too long due the fast work both you and Alex are putting in 1 Link to comment Share on other sites More sharing options...
alex Posted April 15, 2016 Share Posted April 15, 2016 I have never finished one of these STGB's so really aiming for just the basics, nothing fancy at all. Don't worry, this kits almost goes together by itself! Nice start so far! Alex Link to comment Share on other sites More sharing options...
Duncan B Posted April 18, 2016 Share Posted April 18, 2016 Seems we're going to be treated to a couple Hunters in the gallery before too long due to fast work...... ......and then there was mine!!! Anyhow I'm glad someone is keeping Col off my back by actually building something, nice build so far and the Belgian option will look good. Duncan B 1 Link to comment Share on other sites More sharing options...
Graeme H Posted April 18, 2016 Author Share Posted April 18, 2016 (edited) OK, best laid plans and all that, but did get a bit done over the weekendSpent a bit of Saturday putting on some of the smaller stuff, like airbrake, sabrinas, and building the small Fuel Tanks, would appear the BAF didn't use anything else, and only on the inner pylon from the photos I could find, so using the "keep it simple stupid" principle, that's what mine will be.Today I painted the back end as some Belgian Hunters had bare metal for the back end, and annoyingly not on any panel line, sort of a tapered affair, also painted the wheel wells with Alcald duraluminium, as it is a little darker.I masked the wheel wells and fuselage side to keep a straight line, will reverse mask the lower when the time comesafter a few mistrials with the silver I settled on Extracolor WeissalimiumIt is a little patchy, due to using other silvers first, that didn't work very well, so will need a polish with micromesh, then another light coat, but will give ita day to dry being an enamel. Stayed tuned for further episodes oh and the flash didn't work, typical Edited April 18, 2016 by Graeme H 4 Link to comment Share on other sites More sharing options...
Graeme H Posted April 22, 2016 Author Share Posted April 22, 2016 After getting my domestic chores out of the way, mowed 2 lawns, refitted a knob on one of the kitchen doors, getting all the washing up done, I have been able to get a little modelling done, not much progress to report though.after getting the underside done, I realised I have to wait for it to dry seeing as I used enamels, couldn't remember why until the nightmare that was trying to get the Tamiya Flat Aluminium to spray came back to me I realised why, anyhoo decided to put some decals on anywayIf anyone has a spare of that IF 126 decal from the Revell F6, I wouldn't mind a spare as I screwed it up putting it on.flopped it over, and remasked and sprayed some Compucolour Dark Sea Grey, now there is a blast from the past, went on fairly well without much griefnow need to wait for that to dry, and on with some green 3 Link to comment Share on other sites More sharing options...
Col. Posted April 22, 2016 Share Posted April 22, 2016 I've a few spare decals. Give me a PM with your address and I'll get it across to you Link to comment Share on other sites More sharing options...
Graeme H Posted May 11, 2016 Author Share Posted May 11, 2016 OK, been really slowed down, by my wife needing to go into hospital for a bit over a week, so all modelling stopped, she got out yesterday. So managed to mask up and get the green on, hopefully get some more done over the next few days, but have to go away for about a week next Tuesday so everything going a bit slower than I would like Only photo update so far The eagle eyed will notice I forgot to paint the tailplanes, now done though 3 Link to comment Share on other sites More sharing options...
Graeme H Posted May 18, 2016 Author Share Posted May 18, 2016 I have managed to get a little time to work on this, small update I gave it a coat of Alclad Aqua Gloss, and left it more than the recommended 6 hrs drying time, and have commenced putting on the Decals/Transfers/Stickers more later thanks for looking 5 Link to comment Share on other sites More sharing options...
nimrod54 Posted May 18, 2016 Share Posted May 18, 2016 Just caught up with this build Graeme. It looks splendid in the grey/green/silver scheme and with a nice splash of colour from the Belgian markings. Great work. Link to comment Share on other sites More sharing options...
Graeme H Posted July 1, 2016 Author Share Posted July 1, 2016 OK having had a computer crash, i'm having to learn to take and upload photos from my tablet, until I can get my PC back Life has been a bit hectic, which is odd considering I'm retired, anyway here for your viewing pleasure or not, my completed model, and first time I think I have got a STGB finished in the alloted time. Will put up more photos once I learn how 3 Link to comment Share on other sites More sharing options...
Graeme H Posted July 1, 2016 Author Share Posted July 1, 2016 OK starting to get the hang of uploading from a tablet So some more photos 4 Link to comment Share on other sites More sharing options...
stevehnz Posted July 1, 2016 Share Posted July 1, 2016 Now that I like, not that there is anything wrong with a nice RAF Hunter but those bright Belgian roundels really do give it a point of difference. If only I could find a couple more of these Revell Hunters at a price I can afford, am prepared to pay. Steve. Link to comment Share on other sites More sharing options...
nimrod54 Posted July 1, 2016 Share Posted July 1, 2016 Looks brilliant Graeme and as Steve has said above the roundels give it a nice bit of colour, not that there aren't some colourful RAF machines, but this is a bit different. Well done on getting it finished before the deadline. 1 Link to comment Share on other sites More sharing options...
ForestFan Posted July 1, 2016 Share Posted July 1, 2016 Looks great, well done Link to comment Share on other sites More sharing options...
Col. Posted July 2, 2016 Share Posted July 2, 2016 Lovely work Graeme Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now