The Cameraman Posted March 18, 2016 Share Posted March 18, 2016 (edited) Hi Guys n Gals, E-bay came to the rescue where I've managed to find a scale model of my first ever brand new bike, my much loved 1982 Yamaha XT250. The Bandai kit looks really good and will hopefully build up to be an accurate replication of my original. The main thing that needs attention is the chrome finished wheels, as my particular machine came with rims that were anodised in gold, so I wonder if any of you kind folk could make any suggestions of how to do this? Would it be better to leave the chrome in place and try to cover it with a gold top finish (this could be difficult as how the heck to you cover chrome) or should I strip the chrome off with some suitable chemical and then look for a gold chrome finish etc? Any suggestions would be most appreciated and please note I haven't built a kit for well over 35 years, so I'll do some basic practise work on some old Airfix things I've bought cheap on E-bay, to re-learn processes. And yes, I will start a build thread as soon as I'm ready to begin, with loads of piccies and plenty of errors, for sure! Edited March 18, 2016 by The Cameraman Link to comment Share on other sites More sharing options...
injidup Posted March 18, 2016 Share Posted March 18, 2016 How about stripping the chrome and using Alclad gold? http://alclad2.com/finishes/regular/ 3 Link to comment Share on other sites More sharing options...
The Cameraman Posted March 18, 2016 Author Share Posted March 18, 2016 How about stripping the chrome and using Alclad gold? http://alclad2.com/finishes/regular/ Hi Injidup, that Pale Gold looks to be a really good match. I've bought an airbrush as well, so that's another skill I need to practise with! 2 Link to comment Share on other sites More sharing options...
Stuck Posted March 18, 2016 Share Posted March 18, 2016 I have just brought a Tamiya Yamaha Virago kit, the instructions suggest going over the chrome with Tamiya clear yellow. I have a book with a step by step build done this way and it looks very effective. I presume this is the type of finish you want to achieve Link to comment Share on other sites More sharing options...
The Cameraman Posted March 18, 2016 Author Share Posted March 18, 2016 I have just brought a Tamiya Yamaha Virago kit, the instructions suggest going over the chrome with Tamiya clear yellow. I have a book with a step by step build done this way and it looks very effective. I presume this is the type of finish you want to achieve Hi Stuck, hmmm sounds interesting. Are you going to take this route? Link to comment Share on other sites More sharing options...
vontrips Posted March 18, 2016 Share Posted March 18, 2016 (edited) I'd strip it, then Alclad aluminium, then a clear yellow on top. Close to an anodized finish as the base alloy generally isn't polished before treatment. Edited March 18, 2016 by vontrips 1 Link to comment Share on other sites More sharing options...
The Cameraman Posted March 18, 2016 Author Share Posted March 18, 2016 I strip it, then Alclad aluminium, then a clear yellow on top. Close to an anodized finish as the base alloy generally isn't polished before treatment. Hi Vontrips, thank you kindly for yet another option. I'm learning loads today and I'm really glad I asked. Once all option shave been offered, I'll try 'em out on test parts and select the best one for the final work. 1 Link to comment Share on other sites More sharing options...
injidup Posted March 19, 2016 Share Posted March 19, 2016 I've only just started using Alclad (chrome) and found it easy to use and am very happy with the finish. Vontrips' idea looks good. Keep us posted with your results. 1 Link to comment Share on other sites More sharing options...
D1fuN0 Posted March 21, 2016 Share Posted March 21, 2016 Good morning Chaps An easy way to achieve the anodised wheels on the Yamaha, (and the Virago that Stuck has), is to spray tamiya clear yellow directly from the rattle can onto the chrome part. Now, there's half a dozen people chocking on their tea and bacon butties screaming 'spray directly onto chrome parts!!!!!' But yes. Just make sure that the parts are clean from finger prints etc, one coat of yellow should do nicely, let it dry properly and then coat them with Semi Gloss Clear. Semi Gloss because Clear makes them look just a bit too shiny in that scale, and the semi gloss dulls it down to just the right shinyness (my opinion) The clear is very important because it seals the paint and it wont flake off as you would expect painting directly onto chrome parts. What you are left with is a nice set of Gold rims, and surprisingly, the modelling world as you know it hasn't collapsed into anarchy because you sprayed directly onto a chrome part Mad Steve 1 Link to comment Share on other sites More sharing options...
Rick Brown Posted March 21, 2016 Share Posted March 21, 2016 Soak rims in bleach (or obnoxious chemical of your choice) to remove the chrome, tamiya primer then Alclad! Couldn't be easier and it doesn't even need a sealing coat.. Rick. 1 Link to comment Share on other sites More sharing options...
The Cameraman Posted March 21, 2016 Author Share Posted March 21, 2016 Good morning Chaps An easy way to achieve the anodised wheels on the Yamaha, (and the Virago that Stuck has), is to spray tamiya clear yellow directly from the rattle can onto the chrome part. Now, there's half a dozen people chocking on their tea and bacon butties screaming 'spray directly onto chrome parts!!!!!' But yes. Just make sure that the parts are clean from finger prints etc, one coat of yellow should do nicely, let it dry properly and then coat them with Semi Gloss Clear. Semi Gloss because Clear makes them look just a bit too shiny in that scale, and the semi gloss dulls it down to just the right shinyness (my opinion) The clear is very important because it seals the paint and it wont flake off as you would expect painting directly onto chrome parts. What you are left with is a nice set of Gold rims, and surprisingly, the modelling world as you know it hasn't collapsed into anarchy because you sprayed directly onto a chrome part Mad Steve Hi Mad Steve, thanks for your reply. I'll start practising with my airbrush etc before a decide on which of these options to try out. Soak rims in bleach (or obnoxious chemical of your choice) to remove the chrome, tamiya primer then Alclad! Couldn't be easier and it doesn't even need a sealing coat.. Rick. Hi Rick, what a lovely finish you've managed to obtain there. Thanks for your suggestion as well, most appreciated. 1 Link to comment Share on other sites More sharing options...
Rick Brown Posted March 21, 2016 Share Posted March 21, 2016 Alclads changed my whole outlook on painting metallic's. Many believe it's a dark art, but I've found it's just about the easiest paint to use and cleaning the AB is a doddle. I go out of my way to use it whenever I can. Those Ducati wheels were done very quickly. Bang on the primer, let dry, spray the Alclad. Done. Grab some and have a play. Rick. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now