Rob G Posted April 17, 2016 Share Posted April 17, 2016 That is rather nice, sir. Well done. (The kit glue works quite well for sticking on broken bits. I speak from experience. Put a puddle of it down onto a surface, carefully dip the end of the broken bit in, then put it in place. Hold for a minute, let go. You may Ned to realign it from time to time until it sets up, but it'll work.) (Or you could cheat and use super glue. ) 1 Link to comment Share on other sites More sharing options...
Greg in OK Posted April 17, 2016 Share Posted April 17, 2016 Very nice build! Well done. Greg in OK 1 Link to comment Share on other sites More sharing options...
S5 modeller Posted April 17, 2016 Author Share Posted April 17, 2016 Thank you all very much. The canopy looks rather rough in close up, I think I overthinned the desert yellow, and although it had 3 or 4 coats, it's still pretty see through. With the paint being like brown water, it bled under the masking tape on the canopy. I cleaned it up best I could, using a cocktail stick, but it didn't leave a nice crisp edge. Also the pitot tube didn't survive being removed from the sprue, so I left it off. Oh well, back to my entry for the helicopter group build now. Try for 3 finished kits. Matt 1 Link to comment Share on other sites More sharing options...
Dazey Posted April 18, 2016 Share Posted April 18, 2016 Nice one. I think the colours look very good, too. Regards, David 1 Link to comment Share on other sites More sharing options...
Recommended Posts