Shaun Posted March 4, 2016 Author Share Posted March 4, 2016 Hi Shaun, I should have what you need. Let me give a check at home this evening and I'll let you know. CIAO! Piero P.S.: You are doing a really good job on this GR9. BRAVO! Fingers crossed, you could be a project saver. Thanks Shaun. Link to comment Share on other sites More sharing options...
rainstel109 Posted March 4, 2016 Share Posted March 4, 2016 Shaun, I've had a look at the remnants of the "Air frame" decals I've got when I did my GR.7 and I've got the complete decals required to do ZG858 along with the stenciling also, just drop me PM if you'd like 'em. Link to comment Share on other sites More sharing options...
Shaun Posted March 4, 2016 Author Share Posted March 4, 2016 Shaun, I've had a look at the remnants of the "Air frame" decals I've got when I did my GR.7 and I've got the complete decals required to do ZG858 along with the stenciling also, just drop me PM if you'd like 'em. Looks like it may not be disastrous after all, PM sent. Thanks Shaun Link to comment Share on other sites More sharing options...
UKguyInUSA Posted March 5, 2016 Share Posted March 5, 2016 Sweet!! That's a great looking Harrier in a lovely big scale! I'd love to get me one of those! Have fun with the rest of the build! Cheers Martin Link to comment Share on other sites More sharing options...
Shaun Posted March 15, 2016 Author Share Posted March 15, 2016 Just to prove the project is still alive, here is a progress photo. Shaun. 5 Link to comment Share on other sites More sharing options...
F4u Posted March 16, 2016 Share Posted March 16, 2016 Good to see Shaun . Guy Link to comment Share on other sites More sharing options...
Shaun Posted March 16, 2016 Author Share Posted March 16, 2016 For those who have had the tank correction and wheels from me there are a couple of things to do. On the tanks the nose cone panel line is too far aft,on the A-6 this is fine on a Harrier it needs filling.Discovered at the painting stage!! The main wheels need the inside rim removing so they fit closer the leg, the Trumpeter wheels are spaced too wide. Hope this helps Shaun. Link to comment Share on other sites More sharing options...
Shaun Posted March 19, 2016 Author Share Posted March 19, 2016 Here is a shot of the cockpit, still got to add a few things. 2 Link to comment Share on other sites More sharing options...
phildagreek Posted March 19, 2016 Share Posted March 19, 2016 Looks good, particularly like the different shades of grey. 1 Link to comment Share on other sites More sharing options...
Shaun Posted March 20, 2016 Author Share Posted March 20, 2016 Looks good, particularly like the different shades of grey. Glad you noticed the effort. Shaun. Link to comment Share on other sites More sharing options...
exdraken Posted March 20, 2016 Share Posted March 20, 2016 great model! looks like a very neat build! 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 20, 2016 Share Posted March 20, 2016 Looking good, glad you seem to have sorted replacement tail fin decals, this is gonna look awesome when finished. Keep up the good work All the bestChris 1 Link to comment Share on other sites More sharing options...
Ian Posted April 30, 2017 Share Posted April 30, 2017 Did this ever get finished ??... would be a shame for after all this work not to see it done. Ian. 1 Link to comment Share on other sites More sharing options...
Shaun Posted May 1, 2017 Author Share Posted May 1, 2017 On 4/30/2017 at 6:45 AM, Ian said: Did this ever get finished ??... would be a shame for after all this work not to see it done. Ian. No, still in the same position as the last update...I've had a serous run of personal issues and modelling has sort off not been top of the agenda!...Hopefully mojo will return and with a final push i will get it done....someday! Shaun.. Link to comment Share on other sites More sharing options...
Ian Posted May 4, 2017 Share Posted May 4, 2017 Understood, Shaun. Best Ian. Link to comment Share on other sites More sharing options...
Shaun Posted April 8, 2018 Author Share Posted April 8, 2018 Well been doing a little more work over the Easter break as feel a little more in the mood. Decals now finished and onto the final weathering before flat coat and finally assembly. Really need to fix the photobucket links and move them to another host. 1 Link to comment Share on other sites More sharing options...
IV(AC)Plumb Posted April 8, 2018 Share Posted April 8, 2018 (edited) It's photobucket that has disabled linking, I think most people have stopped using them. Edited April 8, 2018 by IV(AC)Plumb 1 Link to comment Share on other sites More sharing options...
Shaun Posted April 8, 2018 Author Share Posted April 8, 2018 A few photo uploaded to Flicker, this should work. Current status of the project. Harrier side book by SHAUN BOWMAN-DAVIES, on Flickr Harrier underside by SHAUN BOWMAN-DAVIES, on Flickr Harrier tail by SHAUN BOWMAN-DAVIES, on Flickr Harrier book2 by SHAUN BOWMAN-DAVIES, on Flickr Almost there now, just got to tidy up some of the weathering(underside and add exhaust stains down rear fuselage,+ add some streaks) and onto final flat coat and small detail painting. Shaun 7 Link to comment Share on other sites More sharing options...
Shaun Posted April 9, 2018 Author Share Posted April 9, 2018 Got the staining done yesterday, now off to the barn for the flat coat. Link to comment Share on other sites More sharing options...
Piero Posted April 9, 2018 Share Posted April 9, 2018 Hello Shaun, happy to see you back with your big Harrier project!!! CIAO! Piero 1 Link to comment Share on other sites More sharing options...
Shaun Posted April 9, 2018 Author Share Posted April 9, 2018 3 hours ago, Piero said: Hello Shaun, happy to see you back with your big Harrier project!!! CIAO! Piero Thanks for the decals a while ago, the decal disaster I had killed the enthusiasm for build. But got a bit of mojo back lately and it will hopefully push the project to the end?.. Link to comment Share on other sites More sharing options...
Shaun Posted April 15, 2018 Author Share Posted April 15, 2018 Got the staining all done and model ready for flat coat, allmost there now. Link to comment Share on other sites More sharing options...
Shaun Posted April 15, 2018 Author Share Posted April 15, 2018 Some pics of the dirty back end... dirty underside3 by SHAUN BOWMAN-DAVIES, on Flickr dirty underside2 by SHAUN BOWMAN-DAVIES, on Flickr dirty underside1 by SHAUN BOWMAN-DAVIES, on Flickr Shaun. 1 Link to comment Share on other sites More sharing options...
NG899 Posted April 16, 2018 Share Posted April 16, 2018 Hi Shaun, Sorry to hear that things have been a bit rough for you, I hope things are on their way up. Is that the box of stuff I gave/sold you a few years back cunningly crafted together into something which looks more like a Harrier GR9 than a Trumpeter kit built OotB ever could? We Harrier fans are being spoiled with the work Piero and you are doing just now. I also recognise that book from somewhere... the second of the author's names looks very familiar to me... It's mine! Looking forward to seeing the finished result... Cheers for now Nick Link to comment Share on other sites More sharing options...
Shaun Posted April 16, 2018 Author Share Posted April 16, 2018 6 hours ago, NG899 said: Hi Shaun, Sorry to hear that things have been a bit rough for you, I hope things are on their way up. Is that the box of stuff I gave/sold you a few years back cunningly crafted together into something which looks more like a Harrier GR9 than a Trumpeter kit built OotB ever could? We Harrier fans are being spoiled with the work Piero and you are doing just now. I also recognise that book from somewhere... the second of the author's names looks very familiar to me... It's mine! Looking forward to seeing the finished result... Cheers for now Nick Hi Nick, Myself and Peiro must be mad?, your right the Trumpeter Harrier does take a little work to correct! I'm getting there and hopefully nothing major should prevent me from getting to the finish line this time?!! Things are a bit better in life, hence me back at the bench and enjoying a little modelling time.... Shaun. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now