Homebee Posted July 27, 2017 Author Share Posted July 27, 2017 (edited) Source: https://www.facebook.com/cybermodeller/posts/10155323850175250 Sprues on display at the US Nats 2017 V.P. Edited July 31, 2017 by Homebee 1 Link to comment Share on other sites More sharing options...
VMA131Marine Posted July 27, 2017 Share Posted July 27, 2017 Looks awesome! I'm guessing it will be much cheaper than the Trumpeter F/A-18E 1 Link to comment Share on other sites More sharing options...
tomprobert Posted July 28, 2017 Share Posted July 28, 2017 Looks like all the parts are present to do a F/A-18E, F and G. I wonder if they'll all be in the same release? Business sense would say no, but either way it looks like we'll be treated to some fantastic Hornets over the next couple of years. Can't wait - and I bet they'll sell like hot cakes as they'll no doubt be considerably cheaper than the Trumpeter offering. Bravo Revell! 1 Link to comment Share on other sites More sharing options...
colin ritchie Posted July 28, 2017 Share Posted July 28, 2017 that looks lie a BIG box full of Plastic ! Ok I'm in , I gave up on the Trumpter super bug a year or so ago , but this one looks a LOT more enticing , and a lot lower price , I'm willing to bet - yup I'm in ! Link to comment Share on other sites More sharing options...
Albeback52 Posted July 28, 2017 Share Posted July 28, 2017 On the Wonderland website at £62.99. Not yet available to pre order but, they can send a reminder when it becomes available https://www.wonderlandmodels.com/products/revell-132-us-boeing-f-18e-super-hornet/ Allan Link to comment Share on other sites More sharing options...
Homebee Posted August 1, 2017 Author Share Posted August 1, 2017 (edited) F/A-18F & EA-18G Growler variants are also in the pipe line. Source: https://www.cybermodeler.com/special/ipms_usa/ipmsusa2017.shtml Quote Revell/Hobbico had test shots of Revell AG's upcoming 1/32 F/A-18E Super Hornet on display and if you look carefully, you'll also see parts for the F/A-18F and EA-18G there as well which provides another glimpse into the future. V.P. Edited August 2, 2017 by Homebee Link to comment Share on other sites More sharing options...
Shaun Posted August 5, 2017 Share Posted August 5, 2017 Has there been any comment on the forums about the detail on the sprues/parts?...be interesting to know how far Revell have gone on the fine detail....looks great on the sprues and all version will be covered(maybe not on a single release though)... Shaun. Link to comment Share on other sites More sharing options...
Robert Posted November 22, 2017 Share Posted November 22, 2017 Did anyone ask Revell about this one at Telford ? Robert Link to comment Share on other sites More sharing options...
trickydicky210 Posted November 23, 2017 Share Posted November 23, 2017 Wonderland Models have the F-18e showing as due in Feb 2018 https://www.wonderlandmodels.com/products/revell-132-us-boeing-f-18e-super-hornet/ Link to comment Share on other sites More sharing options...
andybiscuits Posted November 23, 2017 Share Posted November 23, 2017 I've had this on preorder since May, date has now been pushed back twice from June to December and now February... Link to comment Share on other sites More sharing options...
Stephen Posted November 23, 2017 Share Posted November 23, 2017 A guy from Revell told me it should be in the shops in January. Link to comment Share on other sites More sharing options...
FIGHTS ON Posted November 24, 2017 Share Posted November 24, 2017 great news - and I now need to eat-my-hat having previously (unfairly) suggested that is was just a re-release of the Trumpy kit. Looks good, just need some more excellent decals to match some of the great schemes offered in 1/48..........perhaps even a VFA-87 modex 302 SU-22 killer? (one of the phots looks like Mr Revell onboard the USS BUSH with a VFA-31 pilot, so might be a possibility???) AIM-9Xs on the sprues looks good, the JDAMs look like the standard Revell USAF versions (anyone comment?) and not seen is the AN/ASQ-228 ATFLIR targeting pod (which Trumpy never supplied either) One for me as THE delayed Christmas pressie - build to follow on here! Link to comment Share on other sites More sharing options...
Homebee Posted February 4, 2018 Author Share Posted February 4, 2018 (edited) On display at the Nuremberg Toy Fair 2018. release expected in March 2018. Source: https://www.facebook.com/Revell/photos/pcb.1768363756542385/1768361969875897/?type=3&theater V.P. Edited February 4, 2018 by Homebee Link to comment Share on other sites More sharing options...
FIGHTS ON Posted February 20, 2018 Share Posted February 20, 2018 further to the above, here is the Youtube link to the ToyFair - F/A-18E comes in @ 2:27 AIM-9L/M shown on port wingtip, but a not unreasonable -9X on the starboard, JDAM (2000lb) looks like a BLU-109/B rather than the GBU31 built around the Mk 84 bomb (i.e. I "think" this is a USAF version not used by the USN????), however the GBU 38 (500lb JDAM) and the GBU-12 (LGB) look pretty good to me. Oh, and finally an accurate -228 targeting pod Cockpit canopy lacks detail, but seat looks ok. Nozzles look poor and the various vents/mesh screens found on the airframe seem to be decals (but the mesh is so fine on the real thing, decals might just work in 1/32?). For the price being quoted by several sources, to get this beast in 1/32 at that price is going to have no complaint from me. Most of my observations (entirely based on a Youtube video!!) are easily corrected with aftermarket or a bit of scratch work. The ONLY question I cannot answer is the shape issue. I have my 80% finished trumpeter Rhino next to me as I watch the video and worry that the spine shape on this Revell offering has the same "narrowing" issue that their 1/48 kits have, of course, because the model on show has a paint scheme covering the spine, it is, perhaps, not so obvious BUT what the video doesn't show is a nose side on profile to confirm/deny whether Revell have repeated the shape issue there that they got so wrong on their 1/48 kits. STOP PRESS - There was something not right that I couldn't figure out and took 10 replays to finally get. The Front canopy is very "flat" (again, comparing to the Trumpy kit in hand and Jake Melampy's book) - again, something they got wrong on their 1/48 kits. summary: perhaps a little harsh from me (especially based on just watching Youtube), but I think the Rumourmonger allows us to be critical - if only to prompt discussion. Would I buy one? the answer was a resounding "yes"....until I saw that front canopy...... I'm probably going to hold fire until I can see/read some better, more accurate reviews (by experts! rather than me!!!) 2 Link to comment Share on other sites More sharing options...
Vaildog Posted February 20, 2018 Share Posted February 20, 2018 Who builds these example kits for Revell? There is always something that seems off about them. From a technical standpoint they seem fine, but the lack a certain depth and have a more toyish quality that I can't quite put my finger on. 2 Link to comment Share on other sites More sharing options...
thepureness Posted May 16, 2018 Share Posted May 16, 2018 When is this due? It must be getting close Link to comment Share on other sites More sharing options...
VMA131Marine Posted May 16, 2018 Share Posted May 16, 2018 On 2/20/2018 at 2:42 PM, FIGHTS ON said: further to the above, here is the Youtube link to the ToyFair - F/A-18E comes in @ 2:27 AIM-9L/M shown on port wingtip, but a not unreasonable -9X on the starboard, JDAM (2000lb) looks like a BLU-109/B rather than the GBU31 built around the Mk 84 bomb (i.e. I "think" this is a USAF version not used by the USN????), however the GBU 38 (500lb JDAM) and the GBU-12 (LGB) look pretty good to me. Oh, and finally an accurate -228 targeting pod Cockpit canopy lacks detail, but seat looks ok. Nozzles look poor and the various vents/mesh screens found on the airframe seem to be decals (but the mesh is so fine on the real thing, decals might just work in 1/32?). For the price being quoted by several sources, to get this beast in 1/32 at that price is going to have no complaint from me. Most of my observations (entirely based on a Youtube video!!) are easily corrected with aftermarket or a bit of scratch work. The ONLY question I cannot answer is the shape issue. I have my 80% finished trumpeter Rhino next to me as I watch the video and worry that the spine shape on this Revell offering has the same "narrowing" issue that their 1/48 kits have, of course, because the model on show has a paint scheme covering the spine, it is, perhaps, not so obvious BUT what the video doesn't show is a nose side on profile to confirm/deny whether Revell have repeated the shape issue there that they got so wrong on their 1/48 kits. STOP PRESS - There was something not right that I couldn't figure out and took 10 replays to finally get. The Front canopy is very "flat" (again, comparing to the Trumpy kit in hand and Jake Melampy's book) - again, something they got wrong on their 1/48 kits. summary: perhaps a little harsh from me (especially based on just watching Youtube), but I think the Rumourmonger allows us to be critical - if only to prompt discussion. Would I buy one? the answer was a resounding "yes"....until I saw that front canopy...... I'm probably going to hold fire until I can see/read some better, more accurate reviews (by experts! rather than me!!!) I think the problem you are seeing is not that the windshield is too low, but the coaming over the instrument panel is too high. In the image below, the rise of the coming seems to follow the line of the nose contour. On the kit picture above it seems to bend up. Maybe this was a concession to get the instrument panel the right size. 1 Link to comment Share on other sites More sharing options...
FIGHTS ON Posted May 16, 2018 Share Posted May 16, 2018 3 minutes ago, VMA131Marine said: I think the problem you are seeing is not that the windshield is too low, but the coaming over the instrument panel is too high. In the image below, the rise of the coming seems to follow the line of the nose contour. On the kit picture above it seems to bend up. Maybe this was a concession to get the instrument panel the right size. Agree - you seem to have made a good call there. Certainly from the photo you have posted (almost the same angle as the image screenshot) the canopy does actually look right, but the coaming (instrument panel) is too high.......(or too narrow??) regardless, my Trumpy "E" is 98% complete (should be posting in "ready for inspection" this weekend .....and I have scaled up the new Furball AirWing 8 VFA-87 SU-22 killer decals from 1/48 to 1/32 to dress this Revell bird in, when she gets released 1 Link to comment Share on other sites More sharing options...
VMA131Marine Posted May 16, 2018 Share Posted May 16, 2018 2 hours ago, FIGHTS ON said: Agree - you seem to have made a good call there. Certainly from the photo you have posted (almost the same angle as the image screenshot) the canopy does actually look right, but the coaming (instrument panel) is too high.......(or too narrow??) regardless, my Trumpy "E" is 98% complete (should be posting in "ready for inspection" this weekend .....and I have scaled up the new Furball AirWing 8 VFA-87 SU-22 killer decals from 1/48 to 1/32 to dress this Revell bird in, when she gets released I note also that the kit has the front nose gear door installed on the wrong side. 1 Link to comment Share on other sites More sharing options...
bushande Posted June 22, 2018 Share Posted June 22, 2018 I saw this abomination live at the Nuremburg fair and I'll definitely pass on this one. It has so eclatant shape issues in so prominent places like for instance a far far far too flat and broad spine and too narrow and squared off engine trunks at the back end that leave a quite huge gap not visible on the original, that I decided that it would not be worth the money. The gear is also flawed. The biggest problem is for me that a correction particularly of the spine and the engine trunks would be extremely work intensive in my eyes at least, if at all possible?! Thesy did report that Revell pusshed the release date back due to corrections but as long as I don't see a significant change of what I saw at the Nuremburg fair that thing is a definitive no-go for me. 1 Link to comment Share on other sites More sharing options...
modelldoc Posted June 22, 2018 Share Posted June 22, 2018 We will see in October (perhaps 2018) what is in the box. modelldoc 1 Link to comment Share on other sites More sharing options...
FIGHTS ON Posted September 22, 2018 Share Posted September 22, 2018 Wonderland now reporting release date of 22nd Nov 2018 - with a countdown clock of 61 days (from today).......first post on this thread had Revell announcing a Nov 2016 date. Whilst I do not claim to be an expert at the internet, I can find nothing else on the internet, certainly nothing from Revell, so we'll see. As a precaution I've bought the Speed Hunter Graphics sheet which does have the Su22 Killer scheme on it in 1/32. 1 Link to comment Share on other sites More sharing options...
tony.t Posted September 23, 2018 Share Posted September 23, 2018 Looking good. It'll be especially nice in Blue Angels livery, which by all accounts is not too far away either. Pity there isn't and could no longer be a black bunny Hornet. Some things were better in the 1970s, but modern kits have come a very long way since then. £70, deinflated for forty years ago was about £13, with which you could buy around six rounds of Courage's Best Bitter for six people - yes, honest! Don't think I could buy 36 pints for less than £129 now, so the Hornet will be good VFM based on the beerometer. Tony 1 Link to comment Share on other sites More sharing options...
exdraken Posted September 23, 2018 Share Posted September 23, 2018 3 hours ago, tony.t said: Pity there isn't and could no longer be a black bunny Hornet. Tony but there was! at least close enough https://www.reddit.com/r/MilitaryPorn/comments/1n8g8m/a_f14_from_the_vx9_te_squadron_1920x1200/ so you could build one! 2 1 Link to comment Share on other sites More sharing options...
FIGHTS ON Posted September 25, 2018 Share Posted September 25, 2018 On 9/23/2018 at 3:47 PM, tony.t said: based on the beerometer. Just got to that stage in life where I need to explain to my teenage children the value of money and other such responsibilities. After a fruitless attempt I now realise what I was doing wrong, clearly the Oxford Dictionary explanation of "Beerometer is just what I needed. So simple and yet so obvious...........perhaps the term will work with my wife when she discovers what I just paid to Hannants online???? 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now