59North Posted November 17, 2015 Share Posted November 17, 2015 This is likely my first or second post here on Britmodeller, and it concerns an F-5 model that is already being built by a number of fine hobbyist's in this campaign. None-the-less, this is the most peaceful, relaxing, and enjoyable hobby I can think of, and I don't feel the duplication should bother anyone. I'm doing mine in the CAF lizard scheme as shown on the boxtop. I have a reference with a pair of decent color photos of that exact aircraft. So mine will be built OOB using the kit decals. Here the prerequsite photos: I'm starting the model this evening, so progress photos should be forthcoming soon. I've been lurking for quite awhile, admiring the outstanding modelling skills of those who frequent this forum. I certainly hope I can hold my ground in the face of the skilled workmanship I see throughout this forum. Glad to be here. Guy 5 Link to comment Share on other sites More sharing options...
Giorgio N Posted November 17, 2015 Share Posted November 17, 2015 Welcome to this GB and welcome to the forum ! Looking forward to your build 1 Link to comment Share on other sites More sharing options...
trickyrich Posted November 19, 2015 Share Posted November 19, 2015 Yes a very warm welcome to this build as well as your first group build. You'll quite often find on some of these build that a particular model is a really popular choice, in this case the Italeri F-5. Mostly because it's a nice model and does build up into some pretty sweet. You don't have to be an expert builder to join these GB's, it's all about the shared enjoyment of building models that we love. But along the way it's a really good place to pickup those extra tips and also a great place to ask for help if you get stuck! Well I wish you good luck on your first GB and look forward to watching the build, and again welcome to the mad community of the Britmodeller GB's!! 1 Link to comment Share on other sites More sharing options...
59North Posted November 22, 2015 Author Share Posted November 22, 2015 I truly do appreciate your kind comments; just so you know. Thought I'd better report my progress thus far. It's going fairly slow for me, and rather difficult after suffering a stroke earlier this year. That event earned me a left arm barely useful and a severe and annoying memory loss. None the less, I soldier on, and will speak of it no more. I opted to use the kit decals in the cockpit. To my pleasant surprise, I don't feel they look too bad. They may give the purist among you nightmares, though. Also, my color choices probably do not conform to reality. They were chosen to be more contrasting pretty within reason than accurate. I still have to make some resemblance to harnesses and attach them to the seats before I put the cockpit together. I'll make that effort tonight. Anyway, here's the photo: Frankly, I'm fairly happy with the results so far. The main color is Tamiya medium grey XF-20, with the seat frames a lighter Humbrol 129 light gull grey. A splash of Humbrol red on the headrest with khaki drab for the seat. The stick columns are actually Humbrol 72 khaki drill done for contrast, but, the color differance is hardly noticeable. So forever forward. Guy 3 Link to comment Share on other sites More sharing options...
Patrick Martin Posted November 22, 2015 Share Posted November 22, 2015 Well the roundels and flags are beyond wrong on the decal sheet with the kit! 1 Link to comment Share on other sites More sharing options...
59North Posted November 22, 2015 Author Share Posted November 22, 2015 (edited) Well the roundels and flags are beyond wrong on the decal sheet with the kit! I agree Patrick. In my experience, kit decals usually do fail. I'm thinking I can trim that red strip from top and bottom of the flags. That still leaves me with rather poor maple leaves all around; but, with no AM, it is what it is. Edited November 22, 2015 by 59North Link to comment Share on other sites More sharing options...
trickyrich Posted November 22, 2015 Share Posted November 22, 2015 Well it's great to see you have gotten back into modeling. Plus the great thing about Britmodeller is that everybody is made welcome in these GBs no matter watch there skills. It's just a great place to get together to share a common love of modeling even if they don't actually build models. I remember the decal instrument panels in Esci models, Imalways thought they look really neat and even if they weren't the most accurate. That cockpit is looking nice a tidy, well done. 1 Link to comment Share on other sites More sharing options...
modelling minion Posted November 22, 2015 Share Posted November 22, 2015 Nice start Guy. The old ESCI/italeri F-5 is indeed a popular choice, and deservedly so as it's a great little kit. I love your choice of colour scheme as well, the RCAF had some nice schemes for it's aggressors. I look forward to seeing more of your progress. Craig. 1 Link to comment Share on other sites More sharing options...
59North Posted November 26, 2015 Author Share Posted November 26, 2015 I toyed with a few ideas on getting seat harnesses into this build: painted masking tape with metal bits attached, sneaking PE belts from another different kit, or just trying to dress up the existing kit decal harnesses. Finally, I settled on just painting up the existing kit decals. These were left on the backing paper, with that being painted brick red to cover the light blue paper and offsetting the harness. A tap of dull aluminum here and there to suggest buckles. It didn't go as well as I wanted, but, it's done: I'm not quite embarrased at the effort, yet. Must say, though, it was a lot easier when I had two good arms. 4 Link to comment Share on other sites More sharing options...
trickyrich Posted November 26, 2015 Share Posted November 26, 2015 I wouldn't be too upset with what you've done at all, they look great, well done! 1 Link to comment Share on other sites More sharing options...
Skids Posted November 26, 2015 Share Posted November 26, 2015 That looks very tidy, nothing to be embarrassed by. Cant wait to see more 1 Link to comment Share on other sites More sharing options...
mirageiv Posted November 26, 2015 Share Posted November 26, 2015 Another lovely Esci derived kit being built. Cockpit and seats look great to me, maybe like most of us, I think the decals are doing the tiny pits well 1 Link to comment Share on other sites More sharing options...
modelling minion Posted November 26, 2015 Share Posted November 26, 2015 I think your cockpit looks very nice, nothing to be embarrassed about at all. The decals work very well in 1/72 scale. I look forward to seeing more of your build. Craig. 1 Link to comment Share on other sites More sharing options...
59North Posted November 28, 2015 Author Share Posted November 28, 2015 I suppose I should have glued the forward and aft fuselage sides together before joining right and left halves together, just as Nimrod54 did on his build. Completely my fault. Now I anticipate a real filling, sanding, and scribing treat to eliminate the step right there at the join. I'm still very happy with it, and am a true fan of this kit. So far, other than the fuselage join and my crappy cleanup at the fin root, the model is really nice to work with. 3 Link to comment Share on other sites More sharing options...
trickyrich Posted November 28, 2015 Share Posted November 28, 2015 some thin stretched sprue the thickness or a fraction thicker than the gap will sort those gaps out. Much easier to clean up and get a smooth finish plus less chance of excess "filler damage". I love it as these fuselages come together and you get to see the aircrafts lovely lines! It's looking good! 1 Link to comment Share on other sites More sharing options...
59North Posted November 29, 2015 Author Share Posted November 29, 2015 some thin stretched sprue the thickness or a fraction thicker than the gap will sort those gaps out. Much easier to clean up and get a smooth finish plus less chance of excess "filler damage". Thankyou for the hint. I'm going to try that here and there. Link to comment Share on other sites More sharing options...
59North Posted December 4, 2015 Author Share Posted December 4, 2015 This is coming along much slower than most of you, but, still moving. Just a couple of shots of the stretched sprue seam fill shared with me. I think it's working out really well. I'm a heavy handed seam sander. I very nearly sanded right through the lower intake cowling, and had to add a tiny strip of plastic sheet to rebuild after my folly: After I blacked the intake, the repair became virtually invisible: Next step is rescribing the lines I sanded away, and then learning how to sand properly in the first place. 5 Link to comment Share on other sites More sharing options...
trickyrich Posted December 4, 2015 Share Posted December 4, 2015 Glad you found my little hints helpful! They certainly did the trick, well done!! She's looking great and you're making good progress, don't worry about the time, you have plenty! Think you could probably do at least another one in the time you'll have leftover after finishing this one! Just keep up the steady progress and you'll have a really lovely model! Link to comment Share on other sites More sharing options...
mirageiv Posted December 4, 2015 Share Posted December 4, 2015 Looking good, even tiny bits of stretch spruce is still probably the best filler, nice work! Link to comment Share on other sites More sharing options...
59North Posted December 9, 2015 Author Share Posted December 9, 2015 Ok, I admit I'm working on another model, which is why this build is snailing along. Anyway, if I can slide a piece of card stock between the canopy joins, then something must be wrong. The canopy fit on this kit is the only gripe I have. This is a fine model to work with, otherwise. I tried to fix this: I decided to use some of that stretched sprue as a filler again. Probably not the wisest choice for canopy filler; I just hope it will look better after paint. As you can see, there are other smaller canopy cracks that need attention. Thinking of using white carpenters glue as the filler, perhaps. 1 Link to comment Share on other sites More sharing options...
59North Posted December 9, 2015 Author Share Posted December 9, 2015 As it were, there was a bad step at the rear canopy to fuselage join. Probably, it was mostly my fault for attaching the canopy not quite straight. I did decide it had to be trued up somehow. So I decided to add a small slab of .010 sheet, and Tamiya putty fill, risking an obvious out-of-wack aircraft spine. After it was sanded out, I applied a little primer to get an idea how I was doing. The process pictured below: I know it can be seen, but, I'm still happier with this than having that ugly, unnatural step. Now, I have to rescribe the rescribed areas one more time. Funny how a fella never notices the cat hair until a photo is seen. 1 Link to comment Share on other sites More sharing options...
trickyrich Posted December 9, 2015 Share Posted December 9, 2015 some really nice recovery work there, well done. Oh and it took me a while to find the cat hair! You know you could include it in a photo every so often and have it as a "Where's Wally" challenge? 1 Link to comment Share on other sites More sharing options...
mirageiv Posted December 10, 2015 Share Posted December 10, 2015 Looking good! Shame about the canopy fit as the rest of the kit is so nice, but looks like you have solved it well. Look forward to seeing some paint on it! 1 Link to comment Share on other sites More sharing options...
gingerbob Posted December 10, 2015 Share Posted December 10, 2015 I've got four cats, so it is pretty much a given that there's going to be cat hair! bob 1 Link to comment Share on other sites More sharing options...
59North Posted December 15, 2015 Author Share Posted December 15, 2015 I've rescribed as much as I'm going to; too heavy-handed again, as per usual with my modelling. Since I've been using that wonderful stretched sprue filler idea, I'm finding the tightest joins I've ever had. It's great. Now the model is mostly ready for prime, with all major parts attached except for the wing tanks. These are presently undergoing another borrowed idea make-over.: Hope to get to the painting fun part by the weekend. That is, so long as the wife doesn't want to go ice-fishing; her hobby. 3 Link to comment Share on other sites More sharing options...
Recommended Posts