Julien Posted August 31, 2015 Share Posted August 31, 2015 From their FB page; 1/48 SH-2G Seasprite coming in November kit number KH80126 2 Link to comment Share on other sites More sharing options...
CharlieNZ Posted September 1, 2015 Share Posted September 1, 2015 I wonder what other marking options it comes with? It would be nice to think it could be made into an SH-2G(NZ) out of the box, but there's a few things that would need changing. 2 Link to comment Share on other sites More sharing options...
Homebee Posted September 1, 2015 Share Posted September 1, 2015 (edited) (...) It would be nice to think it could be made into an SH-2G(NZ) out of the box, but there's a few things that would need changing. Or like the Polish Navy Dragon... Source: http://www.fightercontrol.co.uk/forum/viewtopic.php?f=16&p=676278 V.P. Edited September 1, 2015 by Homebee Link to comment Share on other sites More sharing options...
smuts Posted September 1, 2015 Share Posted September 1, 2015 wonder if it will have the ASW suite in the rear unlike the original release??? Andy Link to comment Share on other sites More sharing options...
Julien Posted September 1, 2015 Author Share Posted September 1, 2015 wonder if it will have the ASW suite in the rear unlike the original release??? Andy Andy the parts except the operators seat are on the sprues, along with the extra seat in the back, they just dont mention them on the instructions. Link to comment Share on other sites More sharing options...
CharlieNZ Posted September 2, 2015 Share Posted September 2, 2015 The Polish version should be easy enough out of the box. Smoke marker dispensers are in the right place, unlike the Kiwi versions. Link to comment Share on other sites More sharing options...
Homebee Posted September 22, 2015 Share Posted September 22, 2015 And the Polish Dragon is also in the box! Some test build. Source: http://www.kittyhawkmodel.com/#!kh80126/cbpp V.P. 3 Link to comment Share on other sites More sharing options...
Julien Posted September 22, 2015 Author Share Posted September 22, 2015 Want this one. Link to comment Share on other sites More sharing options...
CharlieNZ Posted September 22, 2015 Share Posted September 22, 2015 One curious thing I noticed when I looked at the F model sprues, was that all the rivets are recessed. Now I know as modellers we love our recessed panel lines and rivet detail, but the rivets on a seasprite are raised. They look like Kaman employed ex boiler makers to do the skin work! If anyone wants some G(NZ) l reference pics, this link might prove useful: http://s1233.photobucket.com/user/pgarmonsway/library/Seasprite?sort=3&page=1 Link to comment Share on other sites More sharing options...
heloman1 Posted September 23, 2015 Share Posted September 23, 2015 That's a welcome release, now can we hope for the early version??????????????????? Colin 1 Link to comment Share on other sites More sharing options...
Julien Posted September 23, 2015 Author Share Posted September 23, 2015 One curious thing I noticed when I looked at the F model sprues, was that all the rivets are recessed. Now I know as modellers we love our recessed panel lines and rivet detail, but the rivets on a seasprite are raised. They look like Kaman employed ex boiler makers to do the skin work! If anyone wants some G(NZ) l reference pics, this link might prove useful: http://s1233.photobucket.com/user/pgarmonsway/library/Seasprite?sort=3&page=1 I just thinks its what is expected of kits these days. Link to comment Share on other sites More sharing options...
CharlieNZ Posted September 23, 2015 Share Posted September 23, 2015 I just thinks its what is expected of kits these days. Yes, that is what is so funny. In this case (as with quite a few helicopters) the real rivets are pretty large and raised. It's not flush riveted like a fast jet. I know most people roll their eyes at 70's/80s kits with raised detail, but in some cases raised detail is actually accurate. I'll still be buying this as soon as it comes out because it is a G and I've spent much of the last few years working on them, and the recessed rivet detail doesn't terribly bother me, I just think it's funny that our obsession with fine recessed detail actually leads companies to make less accurate models. 2 Link to comment Share on other sites More sharing options...
heloman1 Posted September 24, 2015 Share Posted September 24, 2015 Charlie. you could always throw caution to the wind and invest a a couple of sheets of AM rivets. I'm of the same opinion being an ex helo grubber. Helos have rivets! Colin Link to comment Share on other sites More sharing options...
CharlieNZ Posted September 24, 2015 Share Posted September 24, 2015 (edited) Charlie. you could always throw caution to the wind and invest a a couple of sheets of AM rivets. I'm of the same opinion being an ex helo grubber. Helos have rivets! Colin I could, and was considering doing this when I was looking at the old Matchbox Seasprite as an option a few years back (since it has no detail at all), but the overall effect in 1/48 of recessed rivets will be close enough for me. The Seasprite has a lot of rivets! Edited September 24, 2015 by CharlieNZ Link to comment Share on other sites More sharing options...
heloman1 Posted September 24, 2015 Share Posted September 24, 2015 I could, and was considering doing this when I was looking at the old Matchbox Seasprite as an option a few years back (since it has no detail at all), but the overall effect in 1/48 of recessed rivets will be close enough for me. The Seasprite has a lot of rivets! Hi Charlie. I used them Archers rivets on my 32nd Revell Lynx build last year. It too is devoid of rivets, where as the Airfix kit has them just right. Colin Link to comment Share on other sites More sharing options...
stakor Posted October 9, 2015 Share Posted October 9, 2015 (edited) I wonder what other marking options it comes with? It would be nice to think it could be made into an SH-2G(NZ) out of the box, but there's a few things that would need changing. Enjoy I was scared when I saw the Polish scheme showed on kiwi model but parts for PL can be seen on the frame scheme ... BTW still there is no reference for the third grey color at the upper side. Edited October 9, 2015 by stakor 2 Link to comment Share on other sites More sharing options...
CharlieNZ Posted October 10, 2015 Share Posted October 10, 2015 (edited) Very excited there are kiwi markings, you've just made my night. The overall colour of the SH-2G(NZ) is FS26440 Light Gull grey. Markings are FS 25237. All the non slip areas are FS26440 too, but are as they are coated in a non slip surface that attracts a lot of dirt, they appear darker. The APU panels shown in black in the marking scheme (on top) are actually FS26440. Encouraging to see they correctly show the smoke marker dispensers fitted to the aft fuselage. Interesting that they show Maverick, but there's not actually anything to load them too as far as I can tell. The mavericks are fitted to outboard weapon pylons, which I don't think are in the kit. Our Mavericks are FS26440 as well, not white. Edited October 10, 2015 by CharlieNZ 1 Link to comment Share on other sites More sharing options...
CharlieNZ Posted November 9, 2015 Share Posted November 9, 2015 Well it's now November, still hoping it will be available in time for Christmas. Link to comment Share on other sites More sharing options...
heloman1 Posted November 9, 2015 Share Posted November 9, 2015 Just might have to invest in one of these and save my F for convestion to the single engined type. Colin Link to comment Share on other sites More sharing options...
Julien Posted November 9, 2015 Author Share Posted November 9, 2015 Just might have to invest in one of these and save my F for convestion to the single engined type. Colin Does anyone do that conversion? Link to comment Share on other sites More sharing options...
Homebee Posted November 9, 2016 Share Posted November 9, 2016 (edited) There's a slightly updated box art in the Kitty Hawk homepage. Things are obviously moving. Coming soon I suppose. Source: http://www.kittyhawkmodel.com/kh80126 V.P. Edited November 9, 2016 by Homebee Link to comment Share on other sites More sharing options...
Robotics Posted November 9, 2016 Share Posted November 9, 2016 On donderdag 24 september 2015 at 0:16 AM, CharlieNZ said: Yes, that is what is so funny. In this case (as with quite a few helicopters) the real rivets are pretty large and raised. It's not flush riveted like a fast jet. I know most people roll their eyes at 70's/80s kits with raised detail, but in some cases raised detail is actually accurate. I'll still be buying this as soon as it comes out because it is a G and I've spent much of the last few years working on them, and the recessed rivet detail doesn't terribly bother me, I just think it's funny that our obsession with fine recessed detail actually leads companies to make less accurate models. In my opinion, this is not an accuracy thing, it's ease for the modellers, which we all, at the end of the day, are. Raised rivets are hell if you have to sand a lot in areas where this is needed, you can't bring them back. If you put a wash on your model it's perfect if you have recessed rivets. In the end people post it in the "Ready for inspection" section and they see a nicely built model on which the rivets are visible and THAT'S what counts in the end. the people who are active there never go on and on and on about the accuracy of the kit. This here at rumourmonger is becoming a world of freakiness and totally misses the point of the hobby which is building a modelkit. So, Homebee makes a new post/thread. Then normally you expect to see people being happy that they are being given te opportunity to build one of their favourite planes/helicopter/whatsoever, or that they might not be interested and tell us why. Then we wait for the kit to come out and the reviews appear on several sites, facebook and youtube from we can all draw the conclusion if we still want it or not. End of story.. Unfortunately there are hordes of people who start to feel victimized, almost hurt by the fact that the manufacturer can have the nerve to make a kit with things which are not perfect, unforgivable ofcourse...ahum. Result; an emotional outbreak of complaints and people who can let the world know how much they know about certain subjects, information which is widely available from the internet. And then they hope that the world will change for them... right. Sorry guys, especially ye who feel attacked, but I had to get this off of my chest. Best regards and above all, HAPPY MODELLING!! Joe Link to comment Share on other sites More sharing options...
Homebee Posted November 9, 2016 Share Posted November 9, 2016 (edited) V.P. Edited November 9, 2016 by Homebee 1 Link to comment Share on other sites More sharing options...
Robotics Posted November 9, 2016 Share Posted November 9, 2016 14 minutes ago, Homebee said: V.P. I completely agree! Link to comment Share on other sites More sharing options...
Sobby_23 Posted November 9, 2016 Share Posted November 9, 2016 Polish Navy scheme is a must build, at least that's what my wallet is fearing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now