Fritag Posted July 16, 2020 Author Share Posted July 16, 2020 (edited) Herewith the aforementioned desultory development hitherto not posted herein.... Yesterday, or perhaps it was last Christmas - it was in any event the previous page - the fuselage strakes had acquired some lateral flanges. The nextstep required these here resin rivets. And they found themselves here: I wasn’t that impressed with the Archer domed rivets actually; a bit too much uneven blobbery and not enough identical domed rivetry. But good enough for the medial surfaces of the strakes. I couldn’t think of a good reason not to stick the tailerons on after that. So I did. And then it occurred to me that the just-drooped airbrakes could go on. I glued slivers of tube on the inside of the airbrake to fix the angle and provide a decent surface for the adhesive: And so we have tastefully drooping airbakes. If a droop can ever properly be described thus of course. The tailerons then needed a few of these of various design: To approximate the flat plates that do something or other at the pivot point of the tailerons: Upper: Lower: After that; more resin rivets were required. So back onto the stage crept this bunch (PS, for hints and tips on applying such rivets apply to Crisp - who has as much experience of the same as the rest of the modelling community combined ) Thankfully I only needed a few double rows on this occasion. To add a bit of character to the tailerons. And there they rest for the present. Although if you half close your eyes and squint, there are least outlines of aeroplanes now: There, I said there weren’t much Edited July 29, 2020 by Fritag 17 Link to comment Share on other sites More sharing options...
giemme Posted July 16, 2020 Share Posted July 16, 2020 24 minutes ago, Fritag said: Ooooooh, they look jolly good, Steve! My nerves are wrecked just by thinking of the resin rivets posing, but I reckon they'll add a lot in terms of realism 27 minutes ago, Fritag said: There, I said there weren’t much The important thing is to get you (re)started, then we'll help keep you going... Ciao 2 2 Link to comment Share on other sites More sharing options...
CedB Posted July 16, 2020 Share Posted July 16, 2020 Very nice riveting Steve - they’re looking pretty perfect eh? Link to comment Share on other sites More sharing options...
hendie Posted July 16, 2020 Share Posted July 16, 2020 small but beautifully formed. Nice update Steve. I'm with you on the Archers decals. I've only used them a couple of times but not been over impressed with either the form or the ability to adhere to the substrate FYI - Social distancing doesn't apply to forums you know - you can update as often as you like. Though it would be preferable if you'd update as often as we'd like! 9 Link to comment Share on other sites More sharing options...
Bedders Posted July 18, 2020 Share Posted July 18, 2020 (edited) Nice to see an update on these Steve. I recently bought the new-ish Revell kit, which is very nice in some areas (the front end and overall surface detail), and pretty awful in others when compared to your embellished Airfixes (trailing edge thicknesses, airbrake area and fuselage shape forward and aft of the tailerons). A missed opportunity to produce a really good Hawk kit. Still I'm going to continue enjoying progress on these. Justin Edited July 19, 2020 by Bedders 1 Link to comment Share on other sites More sharing options...
Seahawk Posted July 18, 2020 Share Posted July 18, 2020 35 minutes ago, Bedders said: I recently bought the new-ish Revell kit, which is very nice in some areas (the front end and overall surface detail, and pretty awful in others when compared to your embellished Airfixes (trailing edge thicknesses, airbrake area and fuselage shape forward and aft of the tailerons). A missed opportunity to produce a really good Hawk kit. Still I'm going to continue enjoying progress on these. With apologies to OP for thread hijack, I'm coming to the same conclusion. Revell got the tiny things right (eg very subtle rivets/screw holes on rear cockpit bulkhead and ejector seats) but the big things wrong (eg horribly thick trailing edges (not seen since the Airfix Fw 190A?), clunky undercarriage doors). And a disappointing amount of flash on a still newish kit. The fact that I'm seriously considering replacing some parts with equivalents from the FIRST Airfix Hawk says something. 1 Link to comment Share on other sites More sharing options...
Bedders Posted July 18, 2020 Share Posted July 18, 2020 (edited) On reflection I s'pose there isn't really much to speak of aft of the tailerons, so let's say above them, and the mix-up between the early and late tails. Justin Edited July 18, 2020 by Bedders 1 Link to comment Share on other sites More sharing options...
Ex-FAAWAFU Posted July 18, 2020 Share Posted July 18, 2020 4 hours ago, Bedders said: ...I'm going to continue enjoying progress on these. Progress? Patience, Grasshopper. [Yes, I know; pot, kettle, etc] 1 7 Link to comment Share on other sites More sharing options...
woody37 Posted July 18, 2020 Share Posted July 18, 2020 Glacial progress young Steve, but quality progress it is. Wonder if we’ll see a Jag to go with them one day? I hope you’re taking care of your health, we need you to live until about 90 at least to get the Jag over the line 😂 1 3 Link to comment Share on other sites More sharing options...
Jon Sharp Posted July 18, 2020 Share Posted July 18, 2020 I'm so glad to see you're back I might just have to pour a glass of something and refresh from the beginning to watch these grow again! 1 Link to comment Share on other sites More sharing options...
T-21 Posted September 15, 2020 Share Posted September 15, 2020 Hope you are ok in lock down Fritag. Your build is an inspiration not just to Hawk builders but all in the modeling fraternity. No matter how small your progress we are all waiting for you to carry on and miss your input. 4 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted September 15, 2020 Share Posted September 15, 2020 Remember, this thread is like a fine wine. Many years may pass but in the end, well worth the wait! Terry 4 2 Link to comment Share on other sites More sharing options...
perdu Posted September 15, 2020 Share Posted September 15, 2020 Tis true Tis also a b+++*** long wait, is there skiing some place? Are we cycling over the steppe? Is there a seabird count in Orkney? Or is one simply at a sedate tea rooms in Harrogate, sipping Earl Grey with one's lovely wife? Oh welladay, one day we must learn the answers... 10 Link to comment Share on other sites More sharing options...
TheBaron Posted September 16, 2020 Share Posted September 16, 2020 Anyone else noticed how Steve's absences coincide with crew launches to the International Space Station? Plus there is a bike aboard... 2 10 Link to comment Share on other sites More sharing options...
perdu Posted September 16, 2020 Share Posted September 16, 2020 But no kind of atmosphere, out there. 2 5 Link to comment Share on other sites More sharing options...
Fritag Posted September 18, 2020 Author Share Posted September 18, 2020 Am chock full of good intentions. Brimming with them. Just have to translate them into action now....... 3 8 Link to comment Share on other sites More sharing options...
bigbadbadge Posted September 18, 2020 Share Posted September 18, 2020 Rivets and drooping airbrake look good and will look fab under paint. Great work Chris Link to comment Share on other sites More sharing options...
Aardvark Posted September 20, 2020 Share Posted September 20, 2020 (edited) On 9/17/2020 at 12:02 AM, TheBaron said: Plus there is a bike aboard... Bike over the Earth is a very dangerous: !!! 😁 Besides: "In space no one can hear you bike!" 😉😁 B.R. Serge Edited September 20, 2020 by Aardvark 5 Link to comment Share on other sites More sharing options...
fatalbert Posted September 20, 2020 Share Posted September 20, 2020 Hurry up and finish these Hawks man,am waiting in anticipation for the Jaguars.🙂 4 Link to comment Share on other sites More sharing options...
cngaero Posted September 20, 2020 Share Posted September 20, 2020 8 minutes ago, fatalbert said: Hurry up and finish these Hawks man,am waiting in anticipation for the Jaguars.🙂 What he said 🙏 Link to comment Share on other sites More sharing options...
Terry1954 Posted September 20, 2020 Share Posted September 20, 2020 8 minutes ago, fatalbert said: Hurry up and finish these Hawks man,am waiting in anticipation for the Jaguars. Jaguar(s) .............. he's planning on building more than one then? YESSS! No pressure then Steve. Terry 2 Link to comment Share on other sites More sharing options...
T-21 Posted December 19, 2020 Share Posted December 19, 2020 Wishing you a Happy Christmas and hope you are keeping well ? Still miss your posts as we need more inspiration in these uncertain times. 4 Link to comment Share on other sites More sharing options...
perdu Posted September 3, 2021 Share Posted September 3, 2021 I say, look what I found. It was nestling behind the sofa in a tea room in Harrogate, wondering if it had been forgotten in the dash from the café to the car... I told it not to worry, daddy had been very busy but was beginning to wonder where he'd left it. ecce! evidential linking "You see I said, daddy hasn't actually forgotten you but left you there where you'd be out of the draught." 1 7 Link to comment Share on other sites More sharing options...
Terry1954 Posted September 3, 2021 Share Posted September 3, 2021 I reckon it was deliberately planted Bill. A sort of set up to frame the whole build. Terry 1 1 Link to comment Share on other sites More sharing options...
perdu Posted September 3, 2021 Share Posted September 3, 2021 1 hour ago, Terry1954 said: I reckon it was deliberately planted Bill. A sort of set up to frame the whole build. Terry Do people really sink so low Terry? What a sick world huh? No, no I don't believe it. I had to go full-on Sherlock Holmes to find it, if it hadn't inadvertently had a genteel old dear's shopping bag on it which made it wriggle I don't think I would have found it even though I did follow a vague clue I disclosed in another conversation a while back. 😲 5 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now