Andy Moore Posted January 8, 2017 Share Posted January 8, 2017 23 hours ago, Will Vale said: I'm trying to do some easy stuff to get my hand in at the moment before I attempt her eyes! How about those Archer eyeball decals Will? although I know you're not one to take the easy way out Andy 1 Link to comment Share on other sites More sharing options...
Sgt.Squarehead Posted January 8, 2017 Share Posted January 8, 2017 Getting a decal in place on a 1/8 figure's eyeball is the 'easy way out'? Whatever it takes Will, whatever it takes.....I'll even cut you some slack on the Sandworm! Link to comment Share on other sites More sharing options...
The Chief Smeg Posted January 8, 2017 Share Posted January 8, 2017 On 16/08/2016 at 3:39 AM, Sgt.Squarehead said: Would that be from the 'Block-War' storylines? I used to be a big fan of 2000AD, back when that was still a date in the future.....I've got the GW game and a few of the supplements in the Attic somewhere, plus a few of the figures too IIRC. I was there when they cut Anderson out of the 'boing' and I also watched Rogue Trooper wander out of the chem mists onto the pages of the 2000ad. Watching this build very carefully. 1 Link to comment Share on other sites More sharing options...
Will Vale Posted April 5, 2017 Author Share Posted April 5, 2017 Poor Judge Anderson! I found her head in my box of in-progress stuff and it looked great, so I went to find the body. Cue an hour of going through boxes, I finally turned it up in the 00 Raiser box, safely in a ziplock bag to avoid dust. The gloss suit looked great, but it turns out that she's gone sticky Definitely worse on the glossy parts, with a touch here and there on the matt boots etc. I assume this is the plasticiser migrating out of the vinyl and stuffing up the enamel cure? I don't think being in a sealed bag will have helped, but the head was similarly stored and is OK suggesting that primer + acrylic isn't the problem, the Alclad varnishes are. I was hoping that I'd sealed it well enough with the other layers, and and been generally careful enough to get away with it all. So.... Can I do anything to fix it, like sealing with acrylic, or am I going to have to strip the paint off and start again? Yours sadly, Will 1 Link to comment Share on other sites More sharing options...
Carts Posted April 5, 2017 Share Posted April 5, 2017 Well that's monumentally crappy 1 Link to comment Share on other sites More sharing options...
rockpopandchips Posted April 5, 2017 Share Posted April 5, 2017 Soory but no help but gutted for you..... 1 Link to comment Share on other sites More sharing options...
Will Vale Posted April 6, 2017 Author Share Posted April 6, 2017 So I've put JA's body in my cabinet, hoping that a bigger air volume but in theory not much dust might help whatever it is to dry again - it did all appear to dry at the time of varnishing. And I might well be fooling myself but she seemed a tiny bit less tacky today than yesterday, so we'll see what happens over a week or so. Cheers, W 3 Link to comment Share on other sites More sharing options...
Hunter Rose Posted April 6, 2017 Share Posted April 6, 2017 Fingers crossed it settles down and dries, thats a real swine!! Link to comment Share on other sites More sharing options...
Stu_davros Posted April 6, 2017 Share Posted April 6, 2017 I have had the same issue every time I've used enamel paints on vinyl kits, I came to the conclusion that the two are incompatible and only use acrylics now. I'll be happy to be proven wrong though. Cheers, Stuart Link to comment Share on other sites More sharing options...
Will Vale Posted April 6, 2017 Author Share Posted April 6, 2017 1 hour ago, Stu_davros said: I have had the same issue every time I've used enamel paints on vinyl kits, I came to the conclusion that the two are incompatible and only use acrylics now. That was my understanding too, with the caveat that it was OK to use enamels if you had sufficient barrier layers (I had lacquer primer and a few coats of acrylic paint) and did a test. My tests were fine at the time, but maybe I needed to leave them for a while to sit before proceeding. Maybe my varnish coat was too wet, or maybe it's as you say and you should never mix the two. Live and learn, etc. Will 1 Link to comment Share on other sites More sharing options...
S5 modeller Posted April 7, 2017 Share Posted April 7, 2017 I've never used enamel paint on a vinyl kit, but all the instructions I've come across say not to use enamel paint straight onto the vinyl, as it will never dry. As far as I'm aware, a good layer of automotive primer, as a base coat, should be sufficient to protect the vinyl. Maybe the paint was still gassing out when you sealed her in the bag? Hoping she dries out for you mate, would be a shame to have to strip her off. Matt Link to comment Share on other sites More sharing options...
Will Vale Posted February 4, 2021 Author Share Posted February 4, 2021 I thought I posted a reply here yesterday, but maybe I didn't hit "post" or something. Anyway, after three years of thinking about it, I have dug JA out of the cupboard and tried a little enamel thinner on a cotton bud to see if I can remove the stickiness without removing the paint. So far so good! Tamiya thinner cuts a bit too quickly, but W&N Sansodor seems to be a bit gentler. The areas I treated haven't got tacky again yet, although that might be too soon to be really sure. There is a slight problem in that the gold has tarnished as well, maybe because I used Alclad High-shine which might not be a straight lacquer? Or maybe I washed it with enamel? Can't remember. I think if I re-establish some highlights I can get away without masking and re-spraying the edges, as they're mostly going to be darker anyway. So... progress of a sort. I'll post some pics when I'm done cleaning the enamel and her wet-look sticky suit looks more practical again. Cheers, Will 3 Link to comment Share on other sites More sharing options...
Carts Posted February 4, 2021 Share Posted February 4, 2021 Good luck,and fingers crossed Will. 1 Link to comment Share on other sites More sharing options...
Will Vale Posted February 4, 2021 Author Share Posted February 4, 2021 Thanks! Link to comment Share on other sites More sharing options...
Hunter Rose Posted February 10, 2021 Share Posted February 10, 2021 Oh man hope it works out Will, would love to see this one finished 🤞 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now