Radpoe Spitfire Posted May 17, 2014 Share Posted May 17, 2014 Hi there I managed to almost finish the IP....when I say nearly finished...I mean there is another small panel that is fixed to the right hand side of the main panel which holds the controls for the carburetor air cleaner and engine fire extinguishers..this I will attempt to build next. So here was my method of making the IP................ Instrument panel 1. First I got a drawing of the IP off the internet and resized it to 1:20 scale................ 2. I then cut out the dials individually because the shape of my IP wasn't quite right!! ....never mind eh?!!! and glued them onto a cut piece of plastic in the shape of the IP............ 3. I then cut another piece of plastic to the same shape of the IP and drilled out holes where the instruments are positioned....... 4. The next job was to cover the instruments with the thinnest clear food packaging I could find in my kitchen bin!!...this of course acts as the glass! 5. I then glued the pre cut panel over the other panel with the instruments on................ 6. With the use of bits of plastic and wire I then glued all the knobs /buttons and bits and bobs onto the IP!!!.............. 7. Applied some black paint............. 8. Then I finished painting all the appropriate bits............... 9. ..............and finally glued the panel into the Cockpit....here are a couple of pics........ It took me 3 odd days but I'm happy with the end result. On with that other small panel now Thanks for looking in Fozzy Happy with the result- I should say that's an under statement......it looks amazing especially with all that detail, keep it up👍👍👍👍👍👍 Link to comment Share on other sites More sharing options...
Fozzy Posted May 18, 2014 Author Share Posted May 18, 2014 Thanks for all your comments chaps! Link to comment Share on other sites More sharing options...
P.o Prune Posted May 18, 2014 Share Posted May 18, 2014 Just thought I'd point out something that I have just noticed when looking over this build for the ... well who's counting? Take a look at the pictures where the instrument panel is installed in the cockpit. If you pay attention to the way the light falls through the windows it looks exactly as the real thing. It's incredible. You can almost smell the mix of engine oil, fuel and hydraulicks and old sweatty leather. 1 Link to comment Share on other sites More sharing options...
brianthemodeller Posted June 11, 2014 Share Posted June 11, 2014 You still out there, Fozzy? Link to comment Share on other sites More sharing options...
perdu Posted June 11, 2014 Share Posted June 11, 2014 Just thought I'd point out something that I have just noticed when looking over this build for the ... well who's counting? Take a look at the pictures where the instrument panel is installed in the cockpit. If you pay attention to the way the light falls through the windows it looks exactly as the real thing. It's incredible. You can almost smell the mix of engine oil, fuel and hydraulicks and old sweatty leather. I say P.o Prune old chap You do realise that is a picture of the real thing don't you... All Fozzy's productions are real (OK you are right, I noticed it too.) 1 Link to comment Share on other sites More sharing options...
Maverick231 Posted June 12, 2014 Share Posted June 12, 2014 Wow Fuzzy, WOW!!!!! I have just read tbrough this whole build in one sitting and oh mu god you really do know how to detail an aircraft! I know you live in Bulgaria but Im willing to drive from the UK and back to pick you up at the end of the year so this amazong model can be put on display at the IPMS Telford Model Show!!! And there is me moaning about simply painting a cockpit green or black haha! Link to comment Share on other sites More sharing options...
fighterjock Posted June 12, 2014 Share Posted June 12, 2014 WOW amazing stuff! Link to comment Share on other sites More sharing options...
Beardylong Posted June 12, 2014 Share Posted June 12, 2014 Right then Fozzy. That's enough hosting & socialising - we need some more B17 action. Don't you know there's a huge bunch of forlorn modelling acolytes out there, pining for some scratch building updates! Don't keep us in suspenders for much longer ............ please?! Link to comment Share on other sites More sharing options...
Pete in Lincs Posted June 12, 2014 Share Posted June 12, 2014 Fozzy is probably busy going door to door stockpiling yoghurt pots to build the wings. 1 Link to comment Share on other sites More sharing options...
Beardylong Posted June 12, 2014 Share Posted June 12, 2014 And stealing wheels of kid's scooters! 1 Link to comment Share on other sites More sharing options...
Fozzy Posted June 12, 2014 Author Share Posted June 12, 2014 Hi every one I'm glad you have sent the rescue team out to get me back to the bench!! I have had a few Gigs with the Band I'm in and had to put most of my energy into that...but its "thank you and goodnight" to that .....and My Family are returning to UK tomorrow ...as it happens .... so I will be restarting the old B17 in the next couple of days! I reckon that I should have an update on the cockpit area soon! You better fill your tank up Maverick231...Ill be waiting for you....it will only take you 5 days to get here!! ....and yes I have got the old yoghurt pots stocked up Pete!! Back real soon with an update...have missed the buzz of it all! Fozzy 2 Link to comment Share on other sites More sharing options...
Fozzy Posted June 14, 2014 Author Share Posted June 14, 2014 Hi all Its been some time since I last posted....Family have departed for UK the planned gig with the band is done and dusted and now its back to the work bench! Time to continue with the cockpit First thing I did was place the wooden floors down ....using wood samples I got from B+Q a few years back...I knew they would come in handy one day! .....and then I had to think about how to replicate the cockpit side wall insulation. I decided to use some stretchy tissue I have....God knows what its used for and where I got it but I thought it would be good for the insulation! Prior to all that I had to do some more measuring and adjust part of the floor because it just didn't look right...it seemed far too short where the control columns will be placed later...what a drag!!! .....a lot of this build is all done by measuring with the eye I am afraid!! Any how here are some pics of the floor and walls...(before painting)......... I painted the insulation (tissue) and whilst all that was drying I tackled some of the equipment beside the co pilot side wall....fidely but enjoyable to scratch!................ The last 4 photo's on this post are of the two halves together showing some of the co pilots equipment..................... I have still got to do more detail on the starboard side wall ...when that's complete I'll start on the pilots side wall. I have realized that this project is not going to be finished this year...I am finding it all a bit daunting ..not knowing what the whole thing is going to look like when its complete!.....so for those of you who are following this I'm afraid there is no light at the end of the tunnel yet!! Thanks guys for encouraging me to continue with this Fozzy 5 Link to comment Share on other sites More sharing options...
Kallisti Posted June 14, 2014 Share Posted June 14, 2014 Even more lovely scratch building! Link to comment Share on other sites More sharing options...
Beardylong Posted June 14, 2014 Share Posted June 14, 2014 Nice to have you back! Link to comment Share on other sites More sharing options...
P.o Prune Posted June 14, 2014 Share Posted June 14, 2014 It's ok you don't finish it this year, Fozzy. I'm truly enjoying this build. I know it's not very polite, but I hope this build goes on for a long time.It's just totally crazy what you do and it's a pleasure following you. Link to comment Share on other sites More sharing options...
The Crusty one Posted June 14, 2014 Share Posted June 14, 2014 i agree id keep tuning in if if took you 2 more years.....amazing stuff mate:-) Link to comment Share on other sites More sharing options...
Spookytooth Posted June 14, 2014 Share Posted June 14, 2014 Great Fozzy just great . Simon. Link to comment Share on other sites More sharing options...
Fozzy Posted June 14, 2014 Author Share Posted June 14, 2014 listen model making chums....thanks a lot for your support....I get days when I think that I should just build a model from my stash instead of scratch building....but you all help me continue with this crazy project...so for that I thank you all FOZZY 2 Link to comment Share on other sites More sharing options...
brianthemodeller Posted June 14, 2014 Share Posted June 14, 2014 It's good to have you back - missed my regular dose of scratch building insanity! Take your time, it's too good a project to rush... Link to comment Share on other sites More sharing options...
Fozzy Posted June 20, 2014 Author Share Posted June 20, 2014 Afternoon chaps Just a quick update on the detail that I am adding to the co pilots side wall.I haven't finished it all yet but its complete up to the rear of the Co pilots seat.....The detail includes the Oxygen regulator for the Co pilot and the Emergency Hydraulic pump. Here is a close up shot of the scratched detail........................... ...and a few Photos of the two halves together showing the work done..................... That's it for today. Next post I will be starting on the Pilots side wall up to the back of the seat....till then happy modelling Thanks for looking in Fozzy 7 Link to comment Share on other sites More sharing options...
PlaStix Posted June 20, 2014 Share Posted June 20, 2014 Excellent detailing as always! I do admire your patience and ability! 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted June 21, 2014 Share Posted June 21, 2014 So the tunnel has been extended? Just so long as there IS a light at the end of it, I for one am willing to wait. I'm enjoying the walk & hoping there isn't a train coming! Link to comment Share on other sites More sharing options...
Fozzy Posted June 22, 2014 Author Share Posted June 22, 2014 So the tunnel has been extended? Just so long as there IS a light at the end of it, I for one am willing to wait. I'm enjoying the walk & hoping there isn't a train coming! Plenty of bends at the moment Pete....but I'm sure I will see the light soon!!! Link to comment Share on other sites More sharing options...
Fozzy Posted June 24, 2014 Author Share Posted June 24, 2014 A quick update on a couple of afternoons work..........................The control box beside the Pilots legI really enjoyed building this!...3/4s of an inch square roughly....although my eyes took a bit of a toll!! Here's the control box prior to painting............................. usual materials were used to put this together(Plastic and wire).............. here it is painted....................... ...and here it is placed in the cockpit................. I have yet to wire it up and of course add all the other boxes/wires.switches etc on this side of the cockpit. So until then...thanks for looking in Fozzy 3 Link to comment Share on other sites More sharing options...
The Crusty one Posted June 24, 2014 Share Posted June 24, 2014 aaaaarggghh hes at it again someone stop him pleeeeeese... hes making me feel like my attempts at modelling are ham fisted and amateurish!!:-D All in fun fozzy:-D supurb work as usual i cant wait for the next installment!:-) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now