Jockster Posted August 1, 2013 Share Posted August 1, 2013 Greetings, I can relax now that my ship has come in! WEM etch set arrived yesterday (ordered on Monday). Trumpy Kit arrived today, Yaaay! Tiny though! Will take pics tonight and post tomorrow, but at least I know I'm on the starting line come Saturday. Jockster. Link to comment Share on other sites More sharing options...
wellzy Posted August 1, 2013 Share Posted August 1, 2013 Welcome to the build Jockster ,look forward to seeing your build Les Link to comment Share on other sites More sharing options...
Jockster Posted August 2, 2013 Author Share Posted August 2, 2013 Piccies as promised! White Ensign set, nice and it covers the Royal Navy version too. (Captain Class) Not as big as I thought it would be, but as this is a 3 month build, perhaps that's just as well. Nice looking kit, I've noticed a little bit of flash and putting the top and bottom hull halves together dry has shown that there will be a little bit of scraping and sanding straight away. Can't wait to get started, but I'll settle for making some notes for the photo etch. I may use the 'Master' Oerlikon cannons I have for the 'Missouri' on this as there are some spare. Jock. 1 Link to comment Share on other sites More sharing options...
robw_uk Posted August 3, 2013 Share Posted August 3, 2013 Man that etch looks fiddly. I thought 1/72 aircraft were hard to see. Looking forward to seeing this go together... Link to comment Share on other sites More sharing options...
Jockster Posted August 5, 2013 Author Share Posted August 5, 2013 Hiya folks, due to a family BBQ on Saturday, I only got the two halves of the hull glued. Sunday was much more productive...... The main sub assemblies dry-fitted. The hull join has been scraped and sanded and a little bit of filler needed for the prop-shaft bearing supports. Otherwise it was 'plain sailing' with this bit! The sub assemblies. Little bits of filler needed here and there for pin marks and slight fit problems. Locating holes for the kit parts being replaced by photo-etch are blanked off and filled. Large squares are where the new cable drums will be, the small rectangles are for the depth charge racks. Unusual for a Trumpeter boat kit in my experience..... the use of filler!!! Although two of these filled bits are where Carley raft mounting points have been removed in preparation for new etched items. Some of this has still to be sanded down. So far, a nice little kit, and promises to be a nice little addition to my fleet! Aaaar! Jockster. Link to comment Share on other sites More sharing options...
robw_uk Posted August 18, 2013 Share Posted August 18, 2013 Nice work so far. Nice subject Link to comment Share on other sites More sharing options...
Jockster Posted August 18, 2013 Author Share Posted August 18, 2013 Thanks Rob, progress has been slow over the past week due to work and home stuff, so the few hours I've had were just scraping the splinter shields as thin as I dared and sorting the awful join lines on the after cabin section. I'll upload some pics when there's something interesting to look at. Link to comment Share on other sites More sharing options...
Jockster Posted September 2, 2013 Author Share Posted September 2, 2013 Hi folks, been able to play with plastic and brass for the past couple of days...... New gun plinths turned from airfix sprue. All three are still to be separated. General layout showing the three 3inch guns, stern racks, K-gun racks, torpedo and mast. The reworked main guns with new plinths, master barrels and WEM details. The fourth gun is spare but will be turned into a practice loader situated behind the mast. New mast turned from brass with WEM details and bits removed from the kit mast. New WEM doors and escape scuttles. One of the torpedo tubes has been hollowed through. New torpedo turned from brass awaiting fins and props. Closer view of mast, portholes and passing scuttles. Hopefully the next post will be sooner showing the Oerlikons (when I find them!), torpedo crane, bridge details and more railings. Thanks for looking, Jocko. 1 Link to comment Share on other sites More sharing options...
Jockster Posted September 2, 2013 Author Share Posted September 2, 2013 Does anyone know how I can separate these pics so that I can add some comments? Link to comment Share on other sites More sharing options...
colin Posted September 2, 2013 Share Posted September 2, 2013 Use the full edit function Link to comment Share on other sites More sharing options...
Jockster Posted September 2, 2013 Author Share Posted September 2, 2013 Thank you Colin. I couldn't find it at first. Link to comment Share on other sites More sharing options...
snapper_city Posted September 3, 2013 Share Posted September 3, 2013 That's really coming together nicely. The etch looks great. Link to comment Share on other sites More sharing options...
wellzy Posted September 3, 2013 Share Posted September 3, 2013 Very nice build keep up the good work Les Link to comment Share on other sites More sharing options...
Forlornhope Posted September 30, 2013 Share Posted September 30, 2013 Any more progress on this Jock, you have been very quiet lately, hope all is well Link to comment Share on other sites More sharing options...
Neal Posted October 5, 2013 Share Posted October 5, 2013 That's some great work with the PE, very neat, consistent work. Link to comment Share on other sites More sharing options...
Jockster Posted November 12, 2013 Author Share Posted November 12, 2013 Thanks Gents, but my apologies to all who have tuned into this one for the lack of updates, my workplace has gone very busy this year and I have not touched a piece of plastic or brass since sept. and 'England' is gathering dust for now. If it's not against the rules I'll finish her off in WIP in the maritime section when I get back to her (hopefully in a few weeks)! In the meantime Ive been catching up on all of your builds and very impressive viewing they've been, well done to all. Kind regards, Jockster. Link to comment Share on other sites More sharing options...
foxy Posted January 5, 2015 Share Posted January 5, 2015 Great work Jocko mate. I have this one half done too lol. Must get around to finishing it. Love the brass work. Frank Link to comment Share on other sites More sharing options...
HOUSTON Posted January 5, 2015 Share Posted January 5, 2015 Jock, EXCELLENT start .... Good work Link to comment Share on other sites More sharing options...
Jockster Posted January 5, 2015 Author Share Posted January 5, 2015 Sorry gents, I forgot about this one, I finished her last year and haven't posted the remainder of the build log or the finished pix. I will try to rectify the situation as soon as possible. Link to comment Share on other sites More sharing options...
Recommended Posts