Jump to content

1/48 Spitfire PR XIX


F4TCT

Recommended Posts

Im sorry to burden you all with yet another PR XIX as I know the spit builds get old fast.

This is my first 'proper' attempt at a kit since childhood and is my first time using an airbrush. The kit seemed to go together well with some filling required. Made a few mistakes but it all adds to the experience.

Firstly the spue's

100_3259.jpg

100_3260.jpg

100_3261.jpg

100_3262.jpg

100_3263.jpg

The cockpit was pieced together and given a coat of xtracrylix interior green.

100_3270.jpg

The cockpit was then installed into the aircraft and the instrument panel is flat black tamiya and was dry brushed.

100_3274.jpg

Seat belts were made using some 2mm jammydog tape.

100_3279.jpg

And finally a side view of the installed cockpit.

100_3280.jpg

The two sides of the aircraft were then joined and some pre-shading was then applied onto the primered aircraft.

100_3282.jpg

100_3295.jpg

100_3296.jpg

The aircraft was then sprayed with xtracrylix Pru Blue.

100_3302.jpg

100_3308.jpg

When dry, the area on the spine of the aircraft was masked and sprayed with xtracrylix RAF Medium Sea Grey and the cockpit glass unmasked.

100_3320.jpg

100_3322.jpg

The decals were then applied. This in some cases didn't go well as I think the ear buds used were far from the best quality, thus leaving some air bubbles in the decal and when X-20A was applied, this only made them worse, still we live and learn.

100_3331.jpg

After the decals were set, they were locked in with some future and a Flory wash was applied.

100_3332.jpg

And finally shes all finished.

100_3347.jpg

100_3348.jpg

100_3349.jpg

100_3351.jpg

100_3352.jpg

100_3353.jpg

100_3354.jpg

The exhausts were drilled to create a recess where indian ink could be applied.

100_3355.jpg

100_3356.jpg

100_3357.jpg

100_3358.jpg

100_3360.jpg

So there we have it, my first of many more builds to come. Hope you all like it. I enjoyed the build and it took me around 5 days on and off to complete.

Dan

  • Like 5
Link to comment
Share on other sites

Hello Dan! Excellent finish. I think the Airfix Spitfires are a briiliant series (these new-tools especially) and in MY opinion, we cannot have too many builds on BM. This one has come out cracking!

Here's to many more builds for you! All the best, regards from Ray

  • Like 1
Link to comment
Share on other sites

Lol i never had the knack to start with.

Just using brushes and far too thick paint and slapping it all over the model.

So first time for everything really

Thanks :)

Link to comment
Share on other sites

Nicley done! Your final wash has brought out the panel lines beautifully and really shows off the detail of this new kit.

Thanks for sharing.

  • Like 1
Link to comment
Share on other sites

I went to my nearest independent model shop (over 10 miles away) and asked about this Spitfire. He swore blind that it hasn't been rel;eased yet, and it's due in June. Needless to say, I suggested he didn't hold his breath waiting for me to go back to collect it!

Seeing yours makes me determined to buy one. Online or Mail order ...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...