IrritableRabbit Posted March 18, 2013 Share Posted March 18, 2013 In hindsight.....I don't think a Sea Harrier FRS1 was such a good choice for a third build since my 30 year modelling 'holiday'.Why?Because too many people around here know too much about them! So building one of these as a test of new to me materials and techniques possibly wasn't such a good idea. So.. You are all going to have to forgive me for using a little artistic licence when I built and painted this. Mostly based on and inspired by this aircraft ( http://www.abpic.co.uk/popup.php?q=1055311 ) on its return to the U.K. after the Falklands conflict (I was in my early teens at the time). I have taken some liberties based on my lack of experience and just tried to get a presentable model, rather than a totally accurate presentation... Could be too much of the 'what ifs' about me. So please excuse the lack of tilted tail plane, the port side tank I should have weathered differently, the lack of 'distressed' sidewinder rail and a hundred and one other little 'errors'.So.... This was built from a second hand Esci kit that sadly had suffered somewhat in its slightly squished box and some of the main parts were somewhat warped. Cue careful bending back into shape in a bowl of hot water. I should have taken that as a warning because THIS build fought me every inch of the way with many little things going wrong. Trying resin parts AND some limited brass all at the same time was almost taking on too much. A bit of a challenge for this inexperienced soul I say, but I had to have those gorgeous Pavla gun pods, nozzles and intakes, as well as give brass a try with a little Airwaves set. I also had a bunch of decals from back in 1982, and a part used Modeldecal sheet that would allow me to create this aircraft without buying any other aftermarket sheets. Sadly, the Esci kit stencil set was pretty awful and didn't respond to Microsol at all. With no decent stencils I decided to replace the whole lot with the excellent Extradecal Falklands Anniversary sheet. Oh, and finished off with the Master pitot and angle of attack tube. I'm totally sold on these, they're great! The brass not so much.So here it is. I'm sort of pleased with it, it's a million miles away from my Matchbox rendition when I was in school, but.. My next model is going to be an out of the box build me thinks... Maybe practice my NMF and weathering a bit and not bother with all those bells and whistles... This time. And before I let you get on and look at my images... One last thing. I will eventually stop banging on about how I haven't done this for 30 years since I left school but I want everyone to know where I'm coming from and... well... erm... be more kind. SeaHarrier03 by IrritableRabbit, on FlickrSeaHarrier01 by IrritableRabbit, on Flickr SeaHarrier04 by IrritableRabbit, on FlickrSeaHarrier05 by IrritableRabbit, on FlickrSeaHarrier06 by IrritableRabbit, on FlickrSeaHarrier07 by IrritableRabbit, on Flickr 5 Link to comment Share on other sites More sharing options...
woody37 Posted March 18, 2013 Share Posted March 18, 2013 Now that's beautiful, great pictures too. It's making me want to dig my Fujimi one out now 1 Link to comment Share on other sites More sharing options...
Paramedic Posted March 18, 2013 Share Posted March 18, 2013 I think it looks absolutely great! Well done! I love the shiny finish and the decals look good! I take it it is one of those where the white in the roundels was painted over? How did you find those resin-parts? I am about to order them for my Airfix Sea Harrier.. Already have the brass pitot-tube.. 1 Link to comment Share on other sites More sharing options...
Val Posted March 18, 2013 Share Posted March 18, 2013 Wow she's a belter! Nice one! 1 Link to comment Share on other sites More sharing options...
SeventySecond Posted March 18, 2013 Share Posted March 18, 2013 Really nice build and you would never know that your last build was 30 years ago. Particularly like the even sheen, not too glossy. It also shows what a great little kits the ESCI early Harrier series is, when built with care like this. 1 Link to comment Share on other sites More sharing options...
abat Posted March 18, 2013 Share Posted March 18, 2013 Very, very, very nice. The finish is superb. Very restrained and very believable. Andrew 1 Link to comment Share on other sites More sharing options...
IrritableRabbit Posted March 18, 2013 Author Share Posted March 18, 2013 I think it looks absolutely great! Well done! I love the shiny finish and the decals look good! I take it it is one of those where the white in the roundels was painted over? How did you find those resin-parts? I am about to order them for my Airfix Sea Harrier.. Already have the brass pitot-tube.. Cheers. The roundels are straight off the Extradecal sheet and do represent the ones where the white is painted over. I'm actually really glad the kit decals were so bad because the Extradecal sheet is fantastic... Although there are more Harriers on it than I'd want to make tbh. As for the resin parts: The gun pods needed a bit of sanding to get them to fit just right. The Intakes popped right on and then needed sanding to keep them flush, and the nozzles were no problem what so ever. I have no experience with resin so can't compare but they are head and shoulders above the kit parts. As SeventySecond mentioned, the Esci kit is a very nice representation with some nice fine detailing for panel lines. Talking of SeventySecond, I'd like to clarify that this is my third build since returning to it at the new year. I do have two OOB build under my belt.. Details of my actual return to the fold here. http://www.britmodeller.com/forums/index.php?/topic/234935110-first-builds-in-30-years-folland-gnat-and-f4u-corsair-172/#entry1245445 @Woody37 Thanks.. especially about the photos, including the comment you made over in my airshow pics thread. @Everyone else Thank you for the positive reaction. And Andrew, whilst looking at actual Sea Harriers they did mostly appear to quite clean and tidy, with the post Falklands only looking slightly more tatty, so I was trying for a weathered look without going over the top but still adding some depth, so I'm please it appears to have worked out reasonably well. Link to comment Share on other sites More sharing options...
cardiff guy Posted March 18, 2013 Share Posted March 18, 2013 pretty little harrier well done Glenn..... 1 Link to comment Share on other sites More sharing options...
SimonR Posted March 18, 2013 Share Posted March 18, 2013 Superb IR, quality build, you have a knack for this i think! cheers simon 1 Link to comment Share on other sites More sharing options...
Vulcanicity Posted March 18, 2013 Share Posted March 18, 2013 Superb, if anything all I'd say that needs improving is your self esteem! I suppose if you really want constructive criticism, the wearing down to bare metal on the tips of the tanks doesn't quite seem believable-all the pictures I've seen show them worn back to zinc chromate primer. However, that was hardly worth mentioning, the model is so lovely! 1 Link to comment Share on other sites More sharing options...
jimbuna Posted March 18, 2013 Share Posted March 18, 2013 She's a real stunner. 1 Link to comment Share on other sites More sharing options...
F-32 Posted March 18, 2013 Share Posted March 18, 2013 I think that's rather lovely! 1 Link to comment Share on other sites More sharing options...
HL-10 Posted March 18, 2013 Share Posted March 18, 2013 Very nice indeed! 1 Link to comment Share on other sites More sharing options...
NickR Posted March 18, 2013 Share Posted March 18, 2013 Very nicely done! Really looks the part 1 Link to comment Share on other sites More sharing options...
Leonl Posted March 18, 2013 Share Posted March 18, 2013 That is one fine kit, I love the finish. 1 Link to comment Share on other sites More sharing options...
murfv Posted March 18, 2013 Share Posted March 18, 2013 I like that a lot, well built, nicely finished and photographed beautifully 1 Link to comment Share on other sites More sharing options...
Plasticbutcher Posted March 18, 2013 Share Posted March 18, 2013 That's a super build. really impressive. 1 Link to comment Share on other sites More sharing options...
Basosz Posted March 18, 2013 Share Posted March 18, 2013 Have no fear, there are also BM members who know absolutely nothing about the SHAR and I think it looks bloody fantastic! Third outing after 30 years, that's spectacular 1 Link to comment Share on other sites More sharing options...
dolphin38 Posted March 18, 2013 Share Posted March 18, 2013 That is a very nice Harrier, good job. 1 Link to comment Share on other sites More sharing options...
russ c Posted March 19, 2013 Share Posted March 19, 2013 Fantastic !! Really Nice 1 Link to comment Share on other sites More sharing options...
goose Posted March 19, 2013 Share Posted March 19, 2013 very nice work, the SHAR looks great Link to comment Share on other sites More sharing options...
Paramedic Posted March 19, 2013 Share Posted March 19, 2013 Cheers. The roundels are straight off the Extradecal sheet and do represent the ones where the white is painted over. I'm actually really glad the kit decals were so bad because the Extradecal sheet is fantastic... Although there are more Harriers on it than I'd want to make tbh. As for the resin parts: The gun pods needed a bit of sanding to get them to fit just right. The Intakes popped right on and then needed sanding to keep them flush, and the nozzles were no problem what so ever. I have no experience with resin so can't compare but they are head and shoulders above the kit parts. Thanks for the info! Didn´t know there were such cool decales, will get them myself! I have seen pics of those and while they are being painted over and wanted that effect as well. Keep up the great work! Link to comment Share on other sites More sharing options...
Smiffy Posted March 19, 2013 Share Posted March 19, 2013 I don't think you should be overly concerned about your alleged rustiness. Your SHAR is a little corker. Lovely job and nice pics, too. Link to comment Share on other sites More sharing options...
Shalako Posted March 19, 2013 Share Posted March 19, 2013 Are you kidding me? This is the ESCI kit? I thought it was the real thing!!! Fantastic job mate. Very realistic. Especially if you think that this is a 20plus years old kit. Cheers Sernak 1 Link to comment Share on other sites More sharing options...
IrritableRabbit Posted March 19, 2013 Author Share Posted March 19, 2013 Thanks for the info! Didn´t know there were such cool decales, will get them myself! I have seen pics of those and while they are being painted over and wanted that effect as well. Keep up the great work! No worries. It's a great sheet, although the instructions did offer me some oddities and a bit of extra research is a good plan. But you'll not want for any FRS1 Sea Harrier OR GR3 Harrier as it is extremely comprehensive, and I'm quite astounded by the quality.. That's what happens after a long break. TBH.. If you don't want to make THAT many Harriers, you could split a sheet with a mate. Oh and yes Sernak, it is as Esci kit and not the real thing as you know but compliment accepted. Although I think any resemblance to the real thing is due to the fact that I'm quite handy with lighting other types of models to make them look really good. And to every single one of you who has posted with comments.. Thank you very much. I'll try and keep up the good work, but lots of things to practice, and with more of my usual shoots ramping up and taking my time it's certainly an OOB build next time. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now