Jump to content

Recommended Posts

  • 3 weeks later...
Posted

Looks like it will be a good build, Tamiya always builds great kits form my experience with them, also love how their instructions include a lot of extra info. Will be watching this build! :popcorn:

Posted

well made a start :)

Main color of cockpit is RLM-Grey.

The masking sticker is not pree-cut and is difficult to use :( (windows behing pilot)

I didnt use the seat belt decals because i am going to use the pilot and gunner figur.

and.... :bangin: one upside-down error

c0.jpg

c1.jpg

c3.jpg

Posted (edited)

Sprayed the interior with "black thinner". The cockpit / fuel tank/ gunner was pushed up after joining fuselages.

Used a little Tipp-ex to fill joints but not much was needed, everything fits "almost perfectly", you can even hear "snap" sometime when it falls together.

f1.jpg

f2.jpg

f3.jpg

Edited by pabbi
Posted
Looks great. What's upside down though?

thanks Don,

upside down - the decals with 6 instruments :banghead: didnt see it until I looked at the photo

c0d.jpg

Posted
well made a start :)

Main color of cockpit is RLM-Grey.

Pabbi

what brand of paint are you using? The interior colour is A-14 'Steel grey' I presume Tamiya have specified a 'near match' from their paint range?

If you check Robert's build there are links about colours, also he asked about AKAN paint [Russian paint company, thought to be the best VSS paint matches]

http://www.britmodeller.com/forums/index.p...topic=234922340

which has links to Humbrol matches of VVS colours.

The paints specified by Tamiya have breifly been discussed, in this thread

http://sovietwarplanes.com/board/index.php?topic=1330.0

I don't have all the Tamiya paints specified so I can't help. [i bought some AKAN a while back]

also some discussion and pictures of the rear gun fitted here

http://sovietwarplanes.com/board/index.php?topic=1383.0

There's a lot more info on the Il-2 and other VVS types on the site.

I hope this is of some help.

cheers

T

Posted
Pabbi

what brand of paint are you using? The interior colour is A-14 'Steel grey' I presume Tamiya have specified a 'near match' from their paint range?

Thanks T, I am using Tamiya paint, the interior color I use is Tamiya XF-22 RLM-Grey, following the Tamiya instruction.

Posted

Great start, I'll be watching this. Don't fret over the upside down decal, seriously who would notice (if you hadn't mentioned it!)?

Posted

ready for some paint :)

no problems to report

the main landing gear has a great fit, not possible to do them not level, I was going to add them after painting but they need to be on before the "landing gear front cover".

the instuction for camouflage paints are

xf-23 light blue

XF-24 dark green, XF-25 olive green, XF-52 earth with a little XF-59 desert yellow

p1.jpg

Posted (edited)

Looking good, you should finish before I have my paint on order

Before anybody comments, XF-24 is dark grey ;) grey / green / earth sounds reasonable for an arrow

Edited by Robert Stuart
Posted (edited)

Looking good, pabbi! Remember that the "earth" colour is actually a tan colour, not a brown colour, as it appears on the Tamiya box. One thing also; although it may be too late to rectify this, the lever on the round object on the starboard side of the pilot's seat should be resting on the aft spar, next to where the seat is attached. On this kit (and seemingly every other kit) it is too far forward. Another point - the square ejection opening on the underside of the wings underneath the cannon should both be pointing towards the port wingtip (AM got this right so if you have the AM kit, look at how they did it - or take a look at Dr.Jellyfingers' build, which uses the AM kit). The opening on the port wing is on the wrong side of the long rectangular opening, which is for the shell casing ejector chute. I hope this makes sense. I really need to do a thread discussing the pros and cons of this kit (definitely mostly pros - this is the best kit of the Shturmovik that anyone has produced so far).

Regards,

Jason

Edited by Learstang
Posted (edited)

thanks Jason, yes the earth color looks diffrent then on he Tamiya box.

camouflage paint is on, tried to paintchip with salt on the walking path, maby it is too much chiping ?

I pre shaded with nato-black.

m1.jpg

m2.jpg

m3.jpg

m4.jpg

Edited by pabbi
Posted

That looks very good, pabbi! It's hard to overdo the paint chipping on the port wingroot; they were often very worn down. What you've done looks realistic.

Regards,

Jason

Posted (edited)

ready for klear and decals :)

I will do the antenna last....

co1.jpg

co2.jpg

co3.jpg

Edited by pabbi
Posted

Very nice, pabbi! I can't wait to see your Ilyusha with the decals on. It will be great to see one of these Tamiya Il-2's finished.

Regards,

Jason

×
×
  • Create New...