Search the Community
Showing results for tags 'kunac'.
Found 3 results
Jon Kunac-Tabinor posted a topic in Work in Progress - AircraftHi gang, right time for another build. I've had this in the stash for a while, and bought the excellent Aviaeology decals when they came out. http://www.aviaeolog...m/aod48003.html I mean a Tiffie with a sharkmouth? - what is not to like? I also bought a truck load of Ultracast parts to enhance the build at the same time. Then I hit what I thought was as tumbling block, and put the whole thing on hold...until recently when a chance discovery in the spares stach, tipped of by a post on here, re started the project. Little needs to be said about the Hasegawa Typhoon. Apart from the cockpit infills, it fits really well, and has no real vices. I've built 2 of them already so this is a chance to add some extra bits too. So in no real order - here we go: First - the cockpit infills. Experience suggests that adding these to each fuselage half first so they are flush, making good the join lines and rescribing is the best way to deal with the less than ideal fit. Here you can see this done, which gives a smooth join on the fuselage sides, but will leave a small gap on the fuselage centre line join. Nothing a plastic shim won't fix though. A damn sight easier than having no gap at the top and a step on the sides! I've also opened up the foot and hand holds on the side too. Inside the moulded detail has been removed as I'll be adding my own. Here is the resin feast that is Ultracast's sonata to the Tiffie: All well cast with no pin holes and fantastic detail. The wider Tempest tailpanes are a simple push fit, and de rigeur for any very late war Typhoon, while the exhausts are a drop fit replacement and a great improvement on the kit parts. They are also, in case you ask, much nicer than the Quickboost resin exhausts ( which Ive used before) being the correct size (the QB ones have always seemed just a tad small to my mind). The seat features a cast-in late war "Q" harness, and as the cockpit opening is rather small this will be a a really obvious bit. Wheels have really nice detail, and the new radiator part has the late war "cuckoo" filter - again a must for a Tiffie from this period. Now for that stumbling block I mentioned. The rocket rails. We are all used to the Tiffie Mk I steel rocket rail with its gently tapering front and twin horizontal launch rails. Here's one attached to a Sherman - yes I know! All Hasegawa's rocket Tiffie boxings come with these.( Mk I rails that it is not Shermans!) However from late 1944 onwards the MkI rails were replaced by the lightweight MKIII aluminium rails. They look very different, as you can see below. And my particular carcharadontic Tiffie, MR-U MP197 245 sqn, shows 2 of the MKIIIs fitted under each wing with a long range drop tank. The MKIII rails are quite fine with subtle rivet detail, and I wasnt amazingly convinced I could scratch them convincingly. While there are some MKIII resin rails available from Airwaves, theres a snag with these.... However I stumbled over a BM thread about Mossie rocket rails, which also showed MK III rails, and as I had bits left from a Tamiya Mossie in the spares stash, a quick check revealed 8 MK III rails sitting unnoticed in the box. Huzzar!!!. The attachment stubs are different for the Tiffie, which is the problem with the Airwaves et - as these seem to be MK III rails attached to Mk I stubs, but thanks to the gracious help of "Mr Typhoon" Chris Thomas - some e-mail pics quickly allowed me to modify and scratch a prototype, Cheers Mr T! Its needs little refining - but I think I know what I'm doing now. Well I hope I do anyway. More to follow..... Cheers Jonners
Jon Kunac-Tabinor posted a topic in Work in Progress - AircraftHI gang - this will be my next build. Thanks to Jaws sale on here, I finally bagged one, and thanks to Notdoneyets phenominal build here: http://www2.britmode...showtopic=16322 Ze jus d'inspirations are flowing. Now - I want to ask for an opinion: Folded wings - yes of no? Folding them will allow for some extra detail and stress the naval nature of this "Naughty Wasp". Leaving them spread will allow the graceful shape of the Hornet airframe to be appreciated ( if only by me and the cat). The model is already started - but not the wing fold yet - so over to youz guyz... what say ye? Cheers Jonnerz
Jon Kunac-Tabinor posted a topic in Ready for Inspection - AircraftHi Guys, well after 7 months she's finally finished. There was a bit of a break in the middle of the build for some other models, as I wanted to make sure I was working on this model with a full cup of interest. Lots of added details, most if whihc you cant really see now. but thats half the fun. The model represents Lansen 32194 Blue 'Ivar' (thats Swedish phonetic for "I") of F6 wing, Karlsborg, 1964, and the squadron shields were added by me - as they are too nice to not have on! Theres a build thread here Jonners Lansen Build Anyhow- onto the pics. Hope you like her! Jonners