Search the Community
Showing results for tags 'Transkit'.
Found 3 results
Hi guys, Well i finally got this caddy finished. There are things i woul go back and change but i will learn from those mistakes and improve upon them in the next model. This was a Revell 1/24 VW Golf GTI, with a C1 Models Transkit to a Cadddy. The engine was swapped out for a VW DOHC 16v Turbo engine from Clearly Scale and the rims were upgraded to a set of 14" Equip Short-Rims from Aoshima. It was a challenging model for me as it was my first Trans Kit. A few things to highlight before the masses do, there are some body panel gaps, there are no windscreen wipers or front/side indicators. Nor is there a front Number plate. I would have added the wipers but the screen fitment meant that i couldn't display it bonnet up with them fitted, so they were left off. Any way, thanks for looking and here are some photos. The build thread is here and the shared google album is here.
Hi! In my "building queue" I have (among others) a Pocher Lamborghini Aventador roadster. I have been looking for some tanskit parts for this and found a site from Tommaso Iuele, who have some parts that looks nice. Does some of you here have experiences with this supplier? https://tommasoiuele.wordpress.com/2015/05/15/new-transkit-lamborghini-aventador-pocher-18/ 8-)
Ok so as teased and subsequently chosen in my Delta WIP, I bring you the Build/Review of the ModellingMaster Transkit for the Hasegawa Ferrari 328 GTB/GTS. The Transkit is to build the Ferrari 308 GTB Group 4 rally car built by Michelotto and challenged mainly by the Pozzi team through 1981 to 1983. And by other teams and privateer's afterward. The Car was transferred into Group B for 1983 like many other Group 4 cars. However it fell foul of the new classes and regulations, namely the ones regarding wheel width. The new Group B classes regulated the maximum width of the wheel depending on the class on which the car competed in. The classes were divided by the engine capacity. The other regulation change for the new class was that bolt on style over fenders were disallowed unless homologated on all 200 production cars. Seeing as the Ferrari was originally homologated into Group 4 where they were allowed. The base car was the standard 308 which didn't feature them. This didn't really affect the cars too much as like previously stated they couldn't use the wider wheels. The final regulation that hit the Group B version was that the Michelotto built cars featured the new 4v heads. Another thing that was lost. However to compensate the new 308 Quattrovalvole was homologated into Group B to remedy this. History lesson over and now back to the transkit. There are 2 versions available to order from ModellingMaster. Website here: http://modellingmaster.com/lang/ru/ferrari-308-gr4-rally/ Version 1 is the one I have here, which is the red and blue Pioneer livery used mainly on the Monte Carlo and Tour de Corse rallies of 1982. Version 2 is the all blue Pioneer livery which ran on many ERC events, but the one featured on the decal sheet is for the Tour de France Automobile of 1982 and features different wheels to version 1. As usual I've collected many reference pics of the car on the specific event I plan on building. Which to clarify is the 1982 Tour de Corse. I've created a folder on my phone with all the pics I've come across in. I've also downloaded all the build and finished pics from the development build over on Automotive forums here: http://www.automotiveforums.com/vbulletin/showthread.php?t=1069713 To use to supplement the instructions. Right lets start shall we. Firstly this is the box you get. Nice and sturdy and will definitely survive shipping and 'handling' Upon opening the box you are presented with this: I will state that I had a fettle of the body shell when I first got the set a couple years back, and so the thin film in the windows has been removed as well as the braces that help support the rear opening for the engine bay. So lets unpack everything shall we First you're presented with a full colour painting and decal placement chart and the instructions. The instructions themselves are stapled in the corner and fold out like so: Now I'm not a fan of this type of instruction. It takes up a larger than necessary space when laid out flat like I have here. And if the pages are folded over each other then it is quite easy to lose track of which side to go next. I found myself confused a couple of times when reading through, familiarising myself with the build sequence. The final thing that lets the instructions down is that aside from the odd missing arrow, the printer used was clearly running low on ink and as such a lot of the diagrams are hard to follow. A few thorough readings should have everything cleared up however, so it is only a minor grievance. On the back of the instructions is the parts list: Now the only addition I would make to this is to label any multiple parts with the amount you should get in the set. Moving onto the most important bit. The Resin. And boy do you get a lot: Yes it is all resin. Most parts are cast in a white resin that looks very much like plastic, even under close examination. There ae some minimal parts cast in the usual beige stuff. Now I have another couple of ModellingMaster Transkits. The first being all of the classic beige resin and one I brought after this one being all of the white stuff. So obviously I caught the transition lol. The only problem with the white resin is it's hard to distinguish between it and the white plastic of the kit once parts are off the sprues. Not a major problem for me as I will be working in small sections with few parts at a time. But something to keep in mind. So lets take a closer look at what you really get. First up is the clear parts for the rear side windows and lights: Next is some engine parts, rollcage, louvers and the auxiliary lights: Here we have the seats, rear bumper and the main lights in the popped up position (you also get the option to have the lights down): The wheels are copies of the Hasegawa Lancia Stratos wheels with correct Michelin slick racing tyres. You also get a spare with the centre bore and wheel nuts drilled out. In this bag is the bonnet, engine cover, front end, front lamp pod and the rear chassis supports: We also have the body itself and the Chassis: The decals are spread over 2 sheets. Presumably one is common to the 2 versions available. [/url] And up close: Finally you get a nice small fret of Photoetch to compliment the build: So all in all it looks to be a very nice and detailed transkit, and you should end up with a very nice model at the end of it. The Transkit is still available to my knowledge and is made to order. After this build and when money permits I fully intend to purchase the second version. The next update will be the first steps of my build and I'm hoping to continue the step by step approach. I will be taking my time with it as it's my first time using resin on such a large scale. Wish me luck TTFN Ashley.