As a result of the close-down of the UK by the British Government last night, we have made all the Buy/Sell areas read-only until we open back up again, so please have a look at the announcement linked here.
Search the Community
Showing results for tags 'Ju-388'.
Found 2 results
Ok the idea for this build is a bit of a mash up of a couple of builds I have wanted to do, but didn’t the time or the motivation for at the time. One has been running around in one form or another in my mind for quite a while now. I have come close a couple of times to starting it, (a Ho-229 was to be the base for one) and I sort of did with the Turbo-Prop Arado, but it still wasn’t quite what I had in mind. I have two similar projects on the go but they're on the back burner for a bit. The second was that I have a Planet Models Ju-388J nightfighter (Jumo 213 version) sitting in the stash that I have been dying to build and have never had the excuse to. So after seeing the Ju-88 STGB I finally had the idea of how to killer two birds with one stone and bring these two ideas together! So the plan is…… If the war had stretched into 1946 we would have seen some interesting aircraft and technologies in service, especially so with radar technology advancing as quick as is was. By the end of the war we were already seeing the next generation of radar systems which operated in the Centimetre band, like the RAF’s H2S and US H2X radars and the German FuG-240 (Berlin) & FuG-244 (Bremen) units. A few of the Ju-88’s were fitted with the FuG-240 and it was found they recovered their original speed which had been lost with the earlier radar units and their large antennas/antlers! It would have been only to be a matter of time before the use of the FuG-240 (and later versions) would have been more widespread, with it being fitted to newer aircraft models as they became available. With the venerable Ju-88 reaching it’s peak in the Ju-388 family this aircraft would have been a prime candidate for the new radar system. Well that’s the plan, chop the nose off a 388 and fit a new nose, simple really, but……….. I want it to be as believable as possible and not too whiffy which will make it a bit harder. So this will be the base, Planet Models Ju-388J-3 with Jumo 213 engines, of cause I reserve the right to add lots of other stuff as I go along, it wouldn’t a normal build if I didn’t throw in heaps of extras! The 388 is actually quite a nice model the only thing that may give me issues is the wings, they are very slightly warped and getting the dihedral right will be fun! The nose is just a resin cast of the long radome version, it looks a bit better in my opinion than the shorter version. Well best to start by cutting off the nose, luckily there is a very convenient panel line to follow for this. Strangely enough this happens to be almost perfectly round which will make life much easier as we go to fit the nose. Ok first fit, it doesn’t look all the great, I’ll need to move it forward a bit. That’s looking a bit better, so I’m going to have to add a bit to get the profiles right, I have a plan for that! First I’ll make a ring using plastic card, working with plastic will make this part so much easier! Next to fill the gap I’m going to use plastic strip like so. I just keep adding rings till I get the right diameter. Then add a disk at the back the size I require and the first part is done, only a small amount of filler required for shaping. Ignoring the joint gap for the moment I now have to decide how I want the new nose to sit, sort of inline with the horizontal axis or a bit dropped down? I like the inline one as it looks good, but I have to remember the flying attitude of the 388 (and 88 for that matter) was slightly nose up, they didn’t fly truly level! So I may need to have it slightly drooped down so the antenna face would be lined up to the vertical axis. Have a look at how the antennas were mounted on 88’s and you’ll see what I mean. Well I’ve made a start, there’s only a couple of hours work (I needed a brake from the Ta-152 as I was getting annoyed with it!) and the project is a goer. I’ve actually done the filling of the nose now as well and it’s looking good! This won’t be a full time project, just something to work on when my other builds frustrate me and I need a break from them. I can’t promise I’ll be finished by Xmas either as I’m bound to do other mods on this as I go along. This should be an interesting build!
AIMS (http://www.aimsmodels.co.uk/index.html) is to release a 1/32nd Junkers Ju-388 L-1 conversion set for the Revell's Junkers Ju-88 kit. Source: http://www.aimsmodels.co.uk/Coming-soon/coming-soon.html V.P.