Search the Community
Showing results for tags 'new tool'.
-
Hi, I found the above Airfix kit, Kit No. AO3029 at a hardware/ironmongers/DIY(select your favourite word) store, price: $12.99USD. What I want to know is this a re-boxing of the ooooolllllddddd Airfix('60s?) kit; or, a new tool, or, a new-er tooling(late '70s-'80s). TIA Joe
-
The next new 1/35th release from Tamiya. http://tamiyablog.com/2016/09/56th-all-japan-model-hobby-show-official-tamiya-scale-model-list-and-photos/ https://www.scalemates.com/kits/1009852-tamiya-35351-u-s-self-propelled-155mm-gun-m40
- 10 replies
-
- 1
-
-
- new tool
- 1/35th scale
- (and 1 more)
-
next new-tool 1/72 kit from Hasegawa is a Draken III: http://hlj.com/product/hsg28/Sci and Bandai already released 1/72 transformable Draken III this month: http://www.1999.co.jp/eng/10394143
-
Morning all, I picked this kit up as a break from the Revell A400M that i've got on the bench. For the first time I am relatively pleased with this attempt, having built two SHARs, one GR3 and one GR9 over the course of the last 2 years. It is also the first time where I am content with the level of post-shading (although I did have to clean up the upper wing surface when i forgot to dilute the wash that I use for the postshading and my airbrush started spraying out this fountain of black- reducing the effectiveness of the finish somewhat! ) Kit: Airfix 1:72 BAe Harrier GR7A/GR9A (from LMS -Mike's Models) Paints: Vallejo Black, Light grey, Medium sea grey, White, Medium olive Alclad II Aluminium -And a variety of mixed Vallejo paints for smaller details Other: Alclad II Aqua gloss Vallejo "Model Wash" Dark grey -for panel lines and post-shading Thanks for looking Kind regards, Sam
-
Hi Guys & Gals...I present to you, my lastest completion. The New Tool Sea King. It took me 3 attempts to get the camo half decent, the 3rd of which was achieved by 8 hours of masking.
- 38 replies
-
- 56
-
-
Evening, Final bits n pieces fitted this afternoon, and I'm calling this done. Built straight out the box, decals and all. Only additions were some tape seat belts, oh and I cheated on the canopy masking with an Eduard set. Flory models panel line wash and weathered further with pastels. I have already noticed a couple of omissions, the gear doors are a tad too clean. Given their location aft of the the lower side of the engine, I suspect these would be far from clean! I have left the wire antenna off just now as the mast had not set when I took the pics. Lessons learnt.......again, must fit, blend and polish the nav lights way before we get to the painting stage! Fortunately the fit wasn't too bad but it's still really noticeable that these have been fitted at the end. Anyway here's a few pics taken in the sun this afternoon, yes, sun again, no snow today just hail earlier! Hope you like her Had to do a wee bit of taxiing and marshalling to find her a wee spot on the shelf though! Thanks, Eng
- 18 replies
-
- 54
-
-
- Beaufighter
- Airfix
- (and 5 more)
-
Just saw this, must say that it looks very nice. http://www.network54.com/Forum/47208/message/1460561540/As+seen+on+Facebook Cheers Dan
-
Morning all, I haven't done a WIP in a while so I thought I might have a go with the new Airfix BE2c (1:72). I'm planning to do this as an "out of the box" build-apart from one or two scratchbuilt details along the way. First, the kit. A nice, small and sturdy box The contents. Exceptionally good decals, very neat! Clear windscreens without any blemishes, the only problem is that they are terribly small! The sprues- one or two ejector pin marks on the inside of the fuselage- but these are out of sight when the cockpit is fitted. Sam
-
Had an email invoice from Airfix today for my 2 new Seaking HAR.3's and on checking the Airfix site its now showing as a New Arrival! No dispatch email just yet but hopefully Mr Postie will be bringing me a wee parcel in a day or 2 Eng
-
Few pics of my current build, Airfix new tool Seaking HC.4. I'm afraid work and real life mean I'm not the fastest builder and my 'bench time' is (as I'm sure many others will agree) not as much as I'd like, so I'd struggle to maintain an interesting 'In Progress' thread but since this is a new tool, I thought you might like a peek at my progress. As for out of the box, I caved and added some seat belts from tape, comm's cables for the crew and a few wee bits of detail on the forward R/H 'broom cupboard' as I intend to have the crew door and main door open. I also added some prominent pipe work on the R/H sidewall and used tape painted in a darker colour to simulate sidewall panelling. With the interior done I buttoned up the fuselage with very little trouble. Due to the now well known tight tolerance issues with the new tool Airfix kits I dry fitted everything! Most of the window cut-outs required opening up slightly to get a good fit. The bubble window gave the most trouble and required the interior of the recess shaved to improve the fit, it's still not 100% but I can live with it as it is now. This afternoons challenge was drilling out the Lightning holes on the troop step! Not content with that I have also drilled out lightening holes on the jammer mounts on the fuselage sides Next up I need to get the cockpit glazing sections together and masked up, a job for my days off next week! Will post a wee update on any progress before then. Many thanks to my work colleague and HC.4 guru FAAKeith who has provided no end of info and guidance on detailing and what to watch out for. All comments and questions welcome, Thanks, Eng- 71 replies
-
- 10
-
-
First one off the bench for 2016, Airfix new tool Wildcat. I waited for the Starter set as I preferred the colour scheme and markings in this boxing. A lovely wee kit to put together, the only fiddly bit being the gear on the gear down option, but well thought out by Airfix. Paints were Tamiya White and dark sea grey (slightly lightened) for the main scheme, and Vallejo and Humbrol for the detail bits n pieces. Decals were straight out the box, there's only about 18 of them. Weathering was with Flory's dark grey wash, acrylic washes and then pastels after the first Matt coat, these were sealed in with another light Matt coat. Only thing I'm not 100% happy with was the canopy framing, some of the paint chipped off when removing the masking, but in 1/72 I ain't going to try and touch this up! Photo's are off the iPhone so not the best, but hope you like it, it's one slightly (very, very slightly!) closer to clearing my stash! Rgds, Eng
-
Going to try and get this one in, hopeful the few blemishes on this kit wouldn't gobble up too much time. Should have researched before pulling the trigger. Being their newer tool, first problem are the IP decals which are too big. Easy fix though, just trim them after application. After some research, the above was confirmed by others. The next blemish to discover was the wing root detail was missing on the starboard fuselage, but beautifully rendered on the port half section. Last one isn't that much of a problem (usual to putty and sand this area anyways), but the engraved panel lines on both fuselages just trail off to nothingness: regards, Jack
-
Just found this. http://www.meng-model.com/new.php?id=491 Not dead but almost ready for release. Dan
-
Looks sweet, like the tracks with separate pads. http://www.themodellingnews.com/2015/09/chieftains-new-clothes-in-box-takoms.html#more looks like it will be a winner. Dan
-
From the information on the All Japan Model & Hobby Show page on the Tamiya website: http://www.tamiya.com/english/THS/ths2015index.htm Andrew
-
Hello fello plastic fondlers, (I'm going to add to this thread a bit at a time due to pc and photobucket incompatabilty related issues so please have patience with me) I recently completed the new tool Spitfire bt Revell in 1/32nd scale and was lucky enough to find a window in the weather that allowed me to take a few snaps. As is my want, I plopped the model onto a base and stood it in front of a scenic backdrop. I spirinkled some props around liberally in an attempt at realism before firing the shutter in full sunshine. Here we see AR213 at rest, possibly before an airshow? It is my theory that Revell used this exact airframe as their template for this offering of the Spitfire. It therefore made sense to try to model it. With the pilot aboard she sits awaiting engine start. (I think the extinguisher is a bit too close to the aircraft in this pic) With engine running the pilot awaits the removal of the wheel chocks before he can taxi onto the grass for takeoff. Finally, he taxiis past before soaring skyward in his precious mount.... This model fought me tooth and claw and in truth, I probably enjoyed it less than I should have. The paint finish is abysmal resulting in me leaving off most of the stencilling to avoid any silvering. I chose to adapt, alter and tweak many details on the kit to get a more accurate looking bird. When I get more time I'll take a few more snaps and detail some of the mods in case anyone is interested. In the mean time I hope you enjoy these images. Cheers.
- 19 replies
-
- 23
-
-
Hi folks, I tend not to do build logs on BM, but thought I'd show a photo of my current wip, the Airfix Bf109E, as I made a somewhat disparaging remark about it on my profile. It is a nice wee kit (the emphasis being on the 'wee', for those of us whose origins are North of Hadrian's Wall), but has some really annoying engineering / fit. Now I can bollix up a kit with an ability matched by few others, but when bits of a new tool Airfix don't fit off the sprue, then I get a bit annoyed. The wing uppers and lowers didn't match up and the lower edge of the LE slats sat proud of the forward edge of the lower wing, also the wing tips and ailerons didn't sit in the same plane, all of which required some fettling of the mating portions of the wing pieces to sort out. The sprue gates are quite oversized and I removed a chunk of the outer edge of the tailplanes (actually the elevators) when I removed them from the sprues with side cutters. That explains the rather odd shape of the outer edge of the elevators in the picture below. In addition, there are some really small pieces that I'm not looking forward to removing from the sprue (Pitot tube, aileron mass balances, gun barrels, etc.). Also removing the mould seams from the tailplane support struts was lots of fun. Right, rant mode is now off. Apart from the above, it's gone together fairly well, although some mechanical deformation of the upper engine cowling piece was necessary to aid fit, and some filler was required at the fuselage / wing underside interface. Anyway, I'm now onto painting, and the second coat of RAF Dark Green sorry, RLM71 dunkelgrun, has just been applied. I'm using the Bf109E colour demarkations from Michael Ullmann's Luftwaffe Colours book and I have just realised that I've got the positions wrong on the starboard wing. Oh poo! Still, we're hopefully on the home straight now, so just have to grit my teeth and get it done. regards, Martin
- 5 replies
-
- 3
-
-
- Bf109E
- Battle of Britain
- (and 3 more)
-
Arrived yesterday after amazon sending the old tool version and me having to send it back A quick shot wit the iPhone sorry about the poor picture -
I think I must have Attention Deficit Disorder or something, because I was thinking I would take a break from modelling for a couple of weeks until the start of the French Fancies GB; however less than a week later I find that I am bored (and I used to work in Insurance so believe me I know bored when I see it)... So I thought I'd make a start on something I had been meaning to do for a while, and combine the decals from the Airfix VC Winners set with the new-tool Airfix Blenheim IV to represent the aircraft flown by Acting Wing Commander Hughie Edwards on the Bremen Raid on 4 July 1941 for which he was awarded the Victoria Cross. Here's the basic kit; labelled as a IVF (the fighter version) but it contains all the parts you would need to make the bomber variants too: I also got some aftermarket goodies which I accumulated over the last few months, the Peewit canopy masks being the most recent I think: Here are the decals from the Airfix VC Winners set - Question: surely by July 1941 underwing roundels too? ... and so I started assembly, the Mk.I I built following the instructions and it turned out fine, but this time I am starting with the cockpit because construction starts with the cockpit, Airfix - these are the relevant components awaiting clean up and later on, paint: It's worth noting that if you intend to build a bomber with either of the under-chin turrets, these are both supplied but you need to open a slot in the floor of the right-hand cockpit part. Cheers, Stew -
I'm not able to post reviews but the first part of this wip will be a review so if any moderators would like to move it to the review section then please feel free! For anyone who has built the excellent recent MkV, this boxing is very similar with many shared parts but also a few key differences. And for anyone who has built the rather disappointing Airfix Mki/ia/iia kit of a couple of years ago this is miles ahead in terms of detail and finesse. One of the very interesting things about this boxing is that it contains many items that allow you to build a pre-war spit and far more satisfyingly than the previous release. As you can see from this page of the instructions, there is a whole separate lower starboard sidewall and undercarriage lever for the pre-war option (option 'C' in the instructions). This could also allow for quite a nice and easy build of a prototype without too much additional work. You can see these parts below: And alongside the undercarriage lever is the early style pitot which is a very welcome addition: Another very visible difference with the pre-war Spitfire is the lack of headrest and seat armour which is also addressed in the instructions: -
Source: http://www.ipmsdeutschland.de/Ausstellungen/Nuernberg2015/Bilder_AT/Italeri_13.htm 100% New Moulds Andrew -
Hello folks, After the last build I've leapt up in scale to the new Revell Spitfire. I've had the kit a wee while but lacked the motivation to start it after reading of a few issues with it here and there. However, bouyed by some recent top builds of almost OOTB models my joy has been re-kindled. I've long wanted a large scale early Spit in the cabinet and waited for Tamiya to release one of their uber kits, sadly to no avail. Instead, Revell came to the rescue with a brand new tooling. It's a fairly well known fact that opinion is divided on this model. Somehave said that the rivet and surface detail treatment is too heavy handed. Others, the exact opposite. I think we all have to take our own view of the subject and decide whether to proceed or not. Personally, I expect to be doing some work on the details so it bothers me not at this point. On to the build and it's a slow start. The instructions begin with the cockpit and as we've probably seen elsewhere, the detail is pretty good ootb. I expect to have to add some detail in there for my own personal satisfaction but, being the lazy b****r that I am, I'd like to keep it to a sensible level. To that end, I've opted to add a pilot. Unfortunately, Revell have chosen not to provide one. No matter, there are some super resin aftermarket pieces available. However, just to complicate things, I'd like to model this airframe as a kind of restored warbird type thing in which case, that whole Irvine flying jacket and Mae West combo is rarely sported. Instead, these warbird jockeys are often to be seen purely in a flying overall. Since I have never spotted a pilot model in that garb there was only one choice,....scratch build the blighter. In my hazy memory I seemed to remember that I had some armour kits that a chum had donated years ago. Sure enough, I found some German tank of some description or other with some unbuilt crewmen still on their sprues. Yes, they are 1/35th scale and might look a little, umm,...little but I thought it was worth a go. To get the clothign to look more like a pilot I sanded off the dude's tunic and used green stuff to add rolled up cuffs and stuff. I'll add a watch to one of his wrists and finish his flying gloves off with more foil once the green stuff has set overnight. If any of you pilot types spot anything that should be altered or could be improved please pipe up and I'll get on it. Originally I'd planned to use the head off a Hasegawa Spit pilot but it's quite crude. Luckily, and thanks to the smashing generosity of one of our members I may be able to revise the head issue. More on that in due course of course. While I had some green stuff on the go I splodged a bit on the backrest of the seat to represent the padding that Revell omitted. It's not brilliant but much of it will be obscured by the parachute pack, belts and harnesses. Once the pilot's putty is cured I'll dry fit him into the seat and see what can be seen around him. That will allow me to decide just how far to take the internal detailling. More soon. Cheers. -
If Spitfires are not your thing then it may be worth looking away now as I'm going to try to make two 1/48 versions simultaneously! A fair while back, when I decided I'd one day like to make the Eduard Mk.IX Spitfire, I didn't know at the time what I was starting. You can check out my finished version of the Mk.IX here. When I thought about such a lovely, quite expensive kit, I decided I ought to practice the skills I'd need to do it justice beforehand. So I practiced by making three 1/72 Spitfires and then moved onto a 1/48 Mk.XVI. Even before I'd started the Mk.IX I realised I was addicted to making Spitfires. A few months ago I'd already picked up the 1/48 Tamiya Mk.Vb and then when the Airfix version appeared (and was quite cheap on pre-order on the big A) I decided to get one of those too. I had originally planned to make the Tamiya kit before the Eduard one but I ended up making the latter for the D-Day Group Build first. So now it's time to expand my Spitfire collection by two. I'm quite excited by this project and thought it would be interesting to see what the comparisons are between the two kits - I have little pre-knowledge about them other than reading bits and pieces about them on the web. Some people seem to be positive about both and others the opposite. Versions of these that I have seen built look pretty good to me but I'm not an expert on the real thing or the kits. In my head I have this idea that I might be able to use each kit to be make the other a better version but this may not work out in practice. I don't intend to do any major surgery on either, but rather just enjoy the type of thing I feel comfortable with. Edit 21/08/15 - if anyone is interested there is a follow up thread to this one where I am currently making the Tamiya and Airfix (new tool) 1/48 Mk.I kits. I'm using a lot of the lessons I learned from this thread. If you are interested it can be found in the Battle of Britain Group Build section here. So box and sprue photos first - I like the artwork on both: In comparison the Airfix box seems a lot fuller of parts but I already know some of them won't get used: Tamiya box: As there did seem to be fewer parts with the Tamiya kit I decided to bolster it a bit with Eduard Zoom set: Tamiya sprues: Some cockpit details - I really like making up the cockpits and both kits seem to have nice details - Tamiya: Tamiya instructions: Versions included in the kit: Airfix sprues: Airfix cockpit detail: Airfix - new style instructions - not sure about these yet: Possible versions in the box: I have also got these bits left over from the cockpit of the Eduard Mk.IX and I might think about if they're better to use somewhere: I'm hoping to get some work started on these this weekend - all I've done so far is get all the parts washed in warm soapy water. Comments and suggestions welcome. Kind regards, Stix- 607 replies
-
- 10
-
-
This is my first ever Typhoon and it was built as part of a diorama for the D-Day Group Build. After the D-Day landings 198 Squadron, flying out from Thorney Island, Funtingdon and Hurn, were involved with ground attacks on tanks (suitable for my diorama) and enemy emplacements around Caen. In July 1944 they moved to Plumetot and then followed the advancing troops into the Netherlands. To commemorate the 70th Anniversary of D-Day Eurofighter Typhoon, ZK308, was painted to represent Hawker Typhoon MN526. It's a lovely kit with nice detail - in fact the 'in-flight' version doesn't make use of a lot of the detail included in the kit so, at some point, I'm planning on making a version of it on the ground. It's all brush painted with Humbrol and Revell acrylic paints applied with hairy sticks. I have used a Prop Blur (another first for me) to make it look like it's in flight. The Typhoon itself is mounted on a clear acrylic rod. The WIP can be found here More photos of the diorama can be found here And a few photos of it on the diorama: My other D-Day aircraft build can be found here. Comments and suggestions welcome. Kind regards, Stix
- 51 replies
-
- 26
-
-
- D-Day Group Build
- Diorama
- (and 4 more)
-
Hi In 2008, my family bought me a flight in a Classic WingsTiger Moth from Duxford. I took control and flew the wonderful old girl towards Newmarket race course. I then turned back towards Audley End House near Saffron Walden. I had a wonderful time and would recommend the experience to all. My wife took these pictures (I'm in the front cockpit): When Airfix released the new Tiger Moth, I decided that I wanted to create a miniature version of R4922. Thanks to the generous gift from a friend (thanks mate!), I built and brush-painted her last Sunday afternoon and then applied a mix of kit and other decals one evening during the week (which aren't particularly accurate). I managed to break off two of the cabane struts while trying to remove the "jig" struts that are intended to ensure the correct alignment of the wings.. I applied a coat of W&N Galeria Satin Varnish and then almost lost the will to live applying the rigging and control cables due to my CA accelerator not working as I had hoped. I painted one of the wheels yellow, as in the above picture and attached the aerial cut from guitar string. I nearly didn't post pictures of the model, as I am not 100% happy with the result. The most obvious issue for me is the over-scale EZ-Line control cables. Anyway, here she is, warts and all! Here she is with the models I made following my more recent Classic WIngs experience:- 13 replies
-
- 16
-
