Search the Community
Showing results for tags 'flogger'.
-
MiG-23MF Flogger B. Pics by Hans J taken at Cold War Museum, Bagenkop in Denmark
- 2 replies
-
- Flogger
- Mikoyan-Gurevich
-
(and 1 more)
Tagged with:
-
ClearProp Models is to release a family of (wrong scale 😎) 1/72nd Mikoyan-Gurevich MiG-23ML, MLA, MLD and P "Flogger" kits. First in line is a 1/72nd MiG-23MLD "Flogger-K" - ref. CP72021 Source: https://www.facebook.com/Clearpropmodels/posts/2801911910091290 Concerning the last statement I suspect a family of ground-attack MiG-23BN/MiG-27. V.P.
- 205 replies
-
- 18
-
- ClearProp Models
- Flogger
-
(and 1 more)
Tagged with:
-
Hi everyone, I am extremely pleased to get my latest build rolled out today. As the WIP timeline will attest, I have been at this one for a long time due to a number of factors, and more recently due to a lack of enthusiasm. I guess that’s how it goes sometimes. Having said that, I remain very pleased that I started her and I am even more pleased with the result. She isn’t perfect but hey ho, she needs to get out and feel the air! As you will know from the WIP (below), she is a MiG-23MF Flogger-B as operated by the Indian Air Force. These aircraft, in their single-seat form and with two-seat support, were operated by 223rd “Tridents” and 224 squadrons “Warlord” and were initially based at Adampur AFS. They entered service in 1983 and were finally retired in 2007, with the unit later taking on the Jaguar. Operationally they were used in at least two conflict operations over Kashmir – Operations Megdoot and Safed Sagar. My depiction shows ‘SK427’ in her early days of service as seen in the photo below which was taken while visiting Pune AFS in 1998. Later the colour schemes changed – through a multi-shaded/colour camouflage to the final overall grey that is prevalent within the IAF currently. These aircraft became grubby throughout their career in the Indian Air Force and so I have taken the liberty of adding a bit more grime! The target of my project. Credit: Phil Camp/Simon Watson SK427 later in her career. Public Domain Grubby, mucky girls going out on the town ;). Credit: Simon Watson/Public Domain After some false starts and re-starts she is built from a combination of the KP and RV kits. I got the latter one cheaply as a “JASDF” marking kit. It is a challenging kit – the plastic is the same for both kits – due to the modular way it has been moulded. Even so, with care and determination, together with some improvements here and there, she builds quite well. The RV kit offers PE too. This, though, is a challenge in itself as it primarily covers the multitude of vanes/antennae/blades that are missed in the KP. Having had a few bits depart my tweezers and ping to far flung recesses of my study, I added some but not all. With regards paintwork I elected, rightly or wrongly, to adopt colours that appeared close to the Pune photo above. It has darkened a little after varnishing but I still think it is close to the colours you can see. I used Humbrol Leather for the Brown and a mix of greens from the Humbrol range. The underside is Russian Pale Blue Grey. A point of note – as you can see from the photo – is that the fin flash is supposed to be at an angle! 😊 I had intended to add some R-23 missiles. I got some Reskit examples but after my banana-like fingers knocked a few fins off I abandoned that. I might add them if the Clear Prop accessories box ever gets released. What did I do/use? Well, she is pretty much OOB but I did add the braces inside the intake “vanes”, which I had first built up around the edges to add definition. Otherwise: Kit - Primarily the KP MiG-23MF Flogger-B 1/72 (KPM0050) kit with extra (and some replacement) bits from the RV kit. The latter is better in that it has harder plastic that gives more definition to details. Paints - Mainly Humbrol on this occasion. H62 Leather, a mix of H80 Grass Green and H120 Light Green, with Colourcoats Pale Blue Grey for undersides. Colourcoats Radome Grey was used on the nose and de-electric areas. Various details got Humbrol and Colourcoats paints used. Decals - The main markings were a combination of excellent drawings by Giorgio @Giorgio N, particularly the unit badge, and Mika at Arctic Decals. Mika then printed everything. I used a selection of stencils and warning decals as I considered appropriate. Aftermarket - Aires cockpit set, Master pitot, Res-Kit wheel set. I did also use a belly tank from an Eduard MiG-21 as well as an aux pitot from the same source. Weathering - A mix of Tamiya Weathering Powders over Flory washes (Dark Dirt for the undersides and Mud for the uppers). In addition I used a Prismacolor silver pencil here and there. I hope you like her! Edit: I forgot to say that when I un-masked the canopy today, not only had the vinyl Montex masks stuck to the plastic rigidly but I also had seepage around them where the edges had peeled back slightly :(. I also noticed that while trying to get them off I had scratched the canopy in two places :(. Fortunately I have a spare ;). So, one day soon she will get a new "lid", as my grandson calls them . Note to self - no more Montex masks!
- 29 replies
-
- 65
-
At the Moscow "Мир детства 2021" expo, ICM has announced a 1/72nd family of Mikoyan-Gurevich MiG-23/-27 Flogger from 2022 Source: AlexGRD V.P.
- 49 replies
-
- 11
-
MiG-23P "Flogger" (KPM0286) 1:72 Kovozávody Prostějov The Mikoyan-Gurevich MiG-23 (NATO Code name Flogger) is a single-seat, variable geometry interceptor and ground attack aircraft. Designed to be tough and reliable yet cheap to manufacture, the Flogger was widely exported outside of the Soviet Union and is still in service with various air forces around the world. The aircraft was intended as a successor to the MiG-21, which although tough and agile, suffered from a limited range, poor weapon carrying ability and a relatively weak radar. The MiG-23 was a significant step forwards for the Soviet Union, providing the VVS and PVO with look down/shoot down capabilities as well as a beyond visual range missile platform. The MiG-23 is powered by a single Khatchaturov turbojet which provides a maximum 28,700 lb/ft of thrust with afterburner. This power gives the MiG-23 sprightly performance, enabling it to achieve a climb rate of 47,000 feet per minute and reach a maximum speed of mach 2.3 at altitude. Over 5,000 Floggers were produced, and although this is far fewer than the 11,400 MiG-21s that rolled off the production line, it still enjoyed considerable export success, finding its way into the inventory of air forces across Eastern Europe, Africa and the Middle East. The MiG-23P (Flogger G) was a second generation MiG-23. It was designed as a specialised air-defense interceptor variant for the Russian Air Force as an interim low-cost aircraft to replace the Su-9/Su-11 and MiG-19. P was for Perekhvatchik (or interceptor) it the same airframe and powerplant as the MiG-23ML, but with an improved avionics suite. Its radar was the improved Sapfir-23P (N006), which could be used in conjunction with the ASP-23P gunsight/HUD (later replaced with the improved ASP-23ML-P) for better look-down/shoot-down capabilities to counter increasing low-level threats like F-111s. The IRST however was removed. The SAU-23P autopilot included a new digital computer which, operating in conjunction with the Lasur-M datalink, enabled GCI ground stations to steer the aircraft towards the target. Here all the pilot had to do was control the engine and fire the weapons. The MiG-23P was the most numerous interceptor in the 1980s with around 500 manufactured between 1978 and 1981. This version of the MiG-23 was never exported and managed to endure the break-up of the Soviet Union, with the last MiG-23P units operating until 1998. Interestingly, in mock BVR air combat the MiG-23P when flown by experienced pilots proved to be equal or even better than the Su-27. The Kit This is in general the 2011 RV Aircraft kit which is being re-boxed by KP, however this is just the plastic without RV's photoetch. The clear parts are also remade by KP. For this version Inside the box are two sprues of grey plastic, a clear sprue; and an additional two small sprues for P specific parts. While the front Construction begins with the cockpit/ Decals are provided for the instrument panel either in Grey, or the Russian Turquoise colour. Next the seat is added to the cockpit tub along with the control column. Seat belts are provided as decals. We now move onto a couple of sub-assemblies. The 5 part engine exhaust nozzle, and the main gear wheels are built up. Now the cockpit tub and front wheel well can be added into the new front fuselage section for this kit, and this can be closed up. While the front fuselage was split left/right the rear is split upper/lower to accommodate the variable geometry wing. The single part wings are placed on their locating pins on the lower fuselage and the upper can then be added trapping the wings and allowing them to swing as needed. These are not interconnected like some kits. The exhaust is then fitted at the rear, and at the front the front fuselage including cockpit is added. The nose cone then goes onto this assembly. At the rear additional vents and airbrakes are added followed by the fin/rudder part (yes the one on the box art is incorrect, however the correct one is in the kit). To the front section the intakes are made up and added (make sure to use the new part for this boxing). The rear control surfaces are then fitted along with the main weapons pylons under the fixed part of the wings. Next up at the front the nose gear, its bay doors and the 23mm cannon pod are added. Following this we move to fit the main gear and its doors. Care must be taken to get the sit if the legs correctly. Two pylons are then fitted to the swinging wings for this version. The last items to be fitted are the canopies. Decals There are three decal options in the box to represent three Russian Aircraft. Decals are printed in-house and have good registration, colour density and sharpness, with a very thin carrier film cut close to the printing. Conclusion Another great release from KP with excellent detail, and plenty of choices. Recommended. Review samples courtesy of
-
MiG-23MF "Arabian Floggers" (KPM0309) 1:72 Kovozávody Prostějov The Mikoyan-Gurevich MiG-23 (NATO Code name Flogger) is a single-seat, variable geometry interceptor and ground attack aircraft. Designed to be tough and reliable yet cheap to manufacture, the Flogger was widely exported outside of the Soviet Union and is still in service with various air forces around the world. The aircraft was intended as a successor to the MiG-21, which although tough and agile, suffered from a limited range, poor weapon carrying ability and a relatively weak radar. The MiG-23 was a significant step forwards for the Soviet Union, providing the VVS and PVO with look down/shoot down capabilities as well as a beyond visual range missile platform. The MiG-23 is powered by a single Khatchaturov turbojet which provides a maximum 28,700 lb/ft of thrust with afterburner. This power gives the MiG-23 sprightly performance, enabling it to achieve a climb rate of 47,000 feet per minute and reach a maximum speed of mach 2.3 at altitude. Over 5,000 Floggers were produced, and although this is far fewer than the 11,400 MiG-21s that rolled off the production line, it still enjoyed considerable export success, finding its way into the inventory of air forces across Eastern Europe, Africa and the Middle East. The MiG-23MF or Flogger B was an export derivative of the MiG-23M produced from 1978 to 1983. There were two versions produced, the first (2A or 23-11A), intended for sale to the Warsaw Pact countries, was practically the same as the MiG-23M with small differences in communication and IFF equipment. The second (2B or 23-11B) was designed for sale for certain Third World client states. Like the 23-11A it featured the Sapfir-23D-III radar (redesignated Sapfir-23E), this however lacked electronic counter-countermeasure (ECCM) features and had a lower overall performance. The communication equipment was also less powerful, with the Lasour-SMA datalink removed from some aircraft. Until 1981, these were delivered to customers with the R-13M missile instead of the R-60. The Kit This is the 2011 RV Aircraft kit which is being re-boxed by KP, however this is just the plastic without RV's photoetch. The clear parts are also remade by KP. Inside the box are two sprues of grey plastic and a clear sprue. Its noted there are parts on the spure for other versions not used here. Construction begins with the cockpit/ Decals are provided for the instrument panel either in Grey, or the Russian Turquoise colour. Next the seat is added to the cockpit tub along with the control column. Seat belts are provided as decals. We now move onto a couple of sub-assemblies. The 5 part engine exhaust nozzle, and the main gear wheels are built up. Now the cockpit tub and front wheel well can be added into the front fuselage section and this can be closed up. While the front fuselage was split left/right the rear is split upper/lower to accommodate the variable geometry wing. The single part wings are placed on their locating pins on the lower fuselage and the upper can then be added trapping the wings and allowing them to swing as needed. These are not interconnected like some kits. The exhaust is then fitted at the rear, and at the front the front fuselage including cockpit is added. The nose cone then goes onto theis assembly. At the rear additional vents and airbrakes are added followed by the fin/rudder part. To the front section the intakes are made up and added. The rear control surfaces are then fitted along with the main weapons pylons under the fixed part of the wings. Next up at the front the nose gear, its bay doors and the 23mm cannon pod are added. Following this we move to fit the main gear and its doors. Care must be taken to get the sit if the legs correctly. The last items to be fitted are the canopies. Decals There are three decal options in the box to represent Aircraft from Algeria, Iraq, and Libya. Decals are printed in-house and have good registration, colour density and sharpness, with a very thin carrier film cut close to the printing. Conclusion Another great release from KP with excellent detail, and plenty of choices. Recommended. Review samples courtesy of
-
Kovozávody Prostějov is to release a family of 1/72nd Mig-23 Flogger kits. http://www.britmodeller.com/forums/index.php?/topic/234931186-azmodellegatoadmiral-wwii-aircraft-comments-questions-and-wishes/?p=1891334 New tool? That's the question. Some sources quoted these future kits as repop from the R.V. Aircraft moulds. V.P.
- 51 replies
-
- 1
-
- Kovozávody Prostějov
- MiG-23
-
(and 1 more)
Tagged with:
-
Hi everyone! I decided to start something new on the side and get off the F-16 I am building for a while because I am getting a bit burnt out with it to be honest. I decided to start something fresher and I thought simpler.... naive I am!! So I decided to start with the Hasegawa Mig-27 Flogger D in the 1/72: This particular release is from 2003 although I am suspecting it comes from an old old kit as a quick search in Scalemates suggests. Also the combination of raised and depressed panel lines suggests. Furthermore there some significant flash in the kit pointing to a worn out mold. So these are the sprues out of the box: Plus a clear sprue with the 2 piece canopy, which can be mounted either close or open and a couple of clear part for signaling lights on the side of the main fuselage. Some details of a few parts: Flash: Now off we go! First things first I did the research in the following websites if you wanna have a look around (best walkarounds I could find): http://scalemodels.ru/news/4987-Walkaround-mig-27-kokpit-tekhnicheskijj-muzejj-toljatti-rossija-MiG-27-Flogger-cockpit-Tolyatti.html http://scalemodels.ru/news/3565-Walkaround-mig-27k-iz-gosudarstvennogo-muzeja-aviacii-zhuljany-kiev.html http://scalemodels.ru/news/3566-Walkaround-mig-23bm-mig-27-Flogger-D-zhuljany-kiev.html http://scalemodels.ru/news/3082-mig-27k-v-muzee-aviacionnojj-tekhniki-v-borovojj.html http://scalemodels.ru/news/1737-Walkaround-mig-27-irkutsk-MiG-27-Flogger-D-Irkutsk.html ( THIS IS MY MAIN REFERENCE) http://scalemodels.ru/news/1373-Walkaround-mig-27-saratov-MiG-27-Flogger-Saratov.html I am not sure if I am missing something but first thing to strike me was the nose. Completely wrong shape, at least for the Flogger D model, which should be as follow: (http://scalemodels.ru/modules/photo/viewcat.php?id=24979&cid=567&min=60&orderby=dateA&show=12) Photo credit True that there are differences between the mig-27 models: But all those nice targeting systems on the nose (Kaira-1 system) completely non existing on the Hasegawa kit! So I set myself to fix this offend! Original nose: A bit of standard Milliput and water to shape the Kaira-1 system main structure: Sanding and reshapping will follow to lower the profile of the structure, also painted the sockets black and cut open the frontal element of the Kaira-1 using a photo-etched mini saw: Now time for the optics! Clear sprue which has been reshaped thinner and polished: Cut the tip for the frontal element of the lens (see reference picture above): A smear of CA and it is fixed! Now the second optical element at the front: This is just a clear styrene sheet cut and glued into place # Next will be covering all elements with the armoured glass windows which will be more clear styrene sheet and nose it is ready to go! I have also been working on the frontal wheel bay which again kit version is FAAAAAAAAAAAAR from reality! I will prepare another post just focusing on that one After that comes the cockpit which in the kit is mysteriously missing! As always comments / suggestions are more than welcome! Hope you like this Cheers, Alex P.S. if you wanna check my F-16 build this is the link http://www.britmodeller.com/forums/index.php?/topic/234965428-172-heller-f-16-ab-old-issue-first-model-fighter/
-
Eduard has just announced 1/48th Mikoyan-Gurevich MiG-23MF "Flogger-B" & MiG-3ML "Flogger-G" in Czechoslovak service. New tool? That's the question. Frankly I hardly imagine Eduard reboxing the Trumpeter's MiG-23 kits. But who knows. If they're new tool and from the same barrel as their 1/48th MiG-21 "Fishbed" Source: https://scontent.fbru2-1.fna.fbcdn.net/v/t31.0-8/22382055_1823842124297393_5421894630712582162_o.png?oh=3b46bbc2e5e4abf84b990a1a4b7b5aba&oe=5A403F00 V.P.
-
This is my rendition of the well-known Syrian MiG-23ML (or to be precise a MiG-23MLAE-2, Izdeliye-23-22B) that defected to Israel in October 1989, as it might have looked when standing QRA in Syria at a time before the event. At the time of the defection itself, the aircraft was armed only with cannon and live flares, but I have shown it with a typical QRA fit of 2 x R-60 and 2 x R-23 missiles. In that time frame, the medium range AAMs would probably have R-24s rather than R-23s but the R-24s in the Dragon missile set I had were too short, whereas the Zvezda R-23s are actually pretty good (albeit the nose of the IR-guided R-23T in the kit need shortening and re-profiling). The base kit here is the Zvezda MiG-23MF, although the rear fuselage (at least in the boxing I had) was a better match for a ML. I used HiDecal MiG-23 decals, a Pavla MiG-23 cockpit and exhaust nozzle, Armory MiG-23 (late) wheels, Master MiG-23 pitot, RES-IM MiG-23 wheel cover, antennae from a Flightpath set, some parts taken from a Hasegawa MiG-23MF (primarily the windscreen, canopy, some undercarriage doors, and aerials) and a spare ML fin from a KP MiG-23MF. The Zvezda kit is generally pretty good in outline but needs a few mods, especially in the length of the fuselage. I added a 20-thou plate to the rear fuselage ahead of the Pavla jet pipe to give a slight stretch there, another 20-thou shim between the fuselage section and the intakes (adjusting the angle of these at the same time) and a 2mm stretch between the radome and the fuselage. The really weak part of the Zvezda kit is the canopy, which is too wide and short, giving the nose a squat appearance. I built up the canopy area to the correct profile to fit the Hasegawa windscreen and canopy. The flare packs on the rear fuselage that are a distinctive feature of Syrian Floggers are scratchbuilt. The nosewheel leg was rebuilt to represent the ML (and later) type but I haven’t got the angles quite right, so my model looks like it has had some sort of hydraulic failure! Plus there is something not right with the angle of the port R-23 launcher. Ah well … By the way, if you are wondering about the different orientation of the stars on the wing insignia, that is based on contemporary photos of Syrian MiG-23s.
-
Mig-23ML/MF Resin Update Sets (for Trumpeter/Eduard) 1:48 Eduard Brassin Eduard have reboxed the Trumpeter kit of this aircraft as a special edition "Bedna" boxing with Czech markings, allowing you to build either an ML or MF airframe. Eduard's new sets are here to improve on the kit detail in the usual modular manner, and we reviewed the PE sets and masks here if you fancy a squint. Get what you want for the areas you want to be more of a focal point. As usual with Eduard's resin sets, they arrive in the familiar Brassin clamshell box, with the resin parts safely cocooned on dark grey foam inserts, and the instructions sandwiched between the two halves, doubling as the header card. The larger sets are safely ensconced in card boxes and use the same foam to protect the resin, Photo-Etch (PE), masks and decals where applicable. As usual with resin, take the precaution of wearing a mask when cutting or sanding resin, as the tiny particles are harmful to your health if breathed in. Washing the parts in warm water will also improve the adhesion of paint, as there may still be some moulding release agent on the parts when you receive them. Mig-23MF/ML Ejection Seat (648429) This is a drop-in replacement for the kit seat, comprising two resin parts, and nickel-plated, pre-painted parts for the crew belts, pull-handle and armrest. Mig-23MF/ML Engine Air Intakes (648434 & 648438) More drop-in resin parts that replace the intakes (not the splitter plate), adds PE blow-in doors, and a choice of two clear lenses on the top of the port intake, with a mask for each into the bargain. The difference between them? A small panel engraved into the rear of the ML. Mig-23ML 648438 Mig-23MF 648434 Mig-23ML Wheels (648431) With two resin main and two nose wheels, plus hub inserts for the outer sides, wafer-thin captive gear bay doors and a mudguard for the front leg, plus PE brake hoses, the protective cage that fits to the "knee" of the main gear legs, and masks (not shown) for the tyres to help you achieve a nice neat demarcation between rubber and hub. Mig-23ML Main Wheel Bays (648428) Replacing the kit bays with ultra-fine detailed resin parts, and adding extra internal parts for realism, resin inner and outer doors and jacks, plus an array of small PE parts for hoses, wiring etc. to create an impressive glimpse into the heart of the machine. Mig-23ML Exhaust Nozzle (648430) Yet another drop-in replacement for the kit exhaust, which is made up from seven resin parts for the ultimate in detail, and should look awesome when painted sympathetically, using the Gunze codes provided as reference. R-23R Apex Missiles for Mig-23 (648432) The pointy-nosed (technical description) R variant of this missiles is the Semi-Active Radar Homing (SARH) version, and you get two missiles in the box with separate steering vanes at the front, larger stabilisers at the rear, and a PE exhaust ring at the back, plus adapter rails. They can be posed with their FOD covers on by cutting off the front of the missiles and adding the supplied covers, plus a ring of PE protectors for the proximity sensors. Decals are provided for the stencils, and the colour call-outs are given in Gunze codes as normal. R-23T Apex Missiles for Mig-23 (648433) The blunt-nosed (another technical description) R variant of this missiles is the Infrared (IR) version, and you get two missiles in the box with separate steering vanes at the front, larger stabilisers at the rear, and a PE exhaust ring at the back, plus adapter rails. They can be posed with their FOD covers on by cutting off the front of the missiles and adding the supplied covers, plus a ring of PE protectors for the proximity sensors. Decals are provided for the stencils, and the colour call-outs are given in Gunze codes as normal. I know. Déjà vu all over again! Review sample courtesy of
-
Mig-23ML/MF Update Sets (for Trumpeter/Eduard) 1:48 Eduard Eduard have reboxed the Trumpeter kit of this aircraft as a special edition "Bedna" boxing with Czech markings, allowing you to build either an ML or MF airframe. Eduard's new sets are here to improve on the kit detail in the usual modular manner. Get what you want for the areas you want to be more of a focal point. As usual with Eduard's Photo-Etch (PE) and Mask sets, they arrive in a flat resealable package, with a white backing card protecting the contents and the instructions that are sandwiched between. Upate Set Mig-23ML (48966) Supplied on a single large fret, this busy brass sheet contains a lot of small details that are spread over the entire airframe. In the cockpit there are new launch rails for the ejection seat, plus small panels on the bulkhead, cockpit sills, canopy internal parts and seat details. The nose gear bay receives new side skins; wiring detail and new bay door hinges, with additional detail added to the main bays too. On the fuselage, many small vents are added as raised parts; a pop-up intake and its tunnel are fitted to a hole you make in the exterior, and stiffeners are added here and there. The air-brakes have wiring added to their bays, and a new detailed skin added to the interior of the brakes themselves, while the intake splitter plates are removed and replaced by a new highly detailed micro-perforated part that should improve detail immensely with careful painting. Inside the intakes, the thick splitters are replaced by more in-scale parts, new auxiliary vents are added on top, and inside the side aux-intakes are backed with a louvered box. The fuel tanks are given PE filler caps, and other small parts are dotted around the airframe Upate Set Mig-23MF (48965) Supplied on a single large fret, identical to the one above in all but name (which is why there isn't another picture – just imagine the different number at the top), the difference are minimal and relate to one area, the tip of the tail fillet. Seatbelts STEEL Mig-23ML/MF (FE932) In case you don't already know, these belts are Photo-Etch (PE) steel, and because of their strength they can be etched from thinner material, which improves realism and flexibility in one sitting. Coupled with the new painting method that adds perceived extra depth to the buckles and other furniture by shading, they are more realistic looking and will drape better than regular brass PE. As well as the two sets of crew belts, you also get a set of the pull-handles between the pilot's knees that gets him out of there in case of an emergency. Masks Tface (EX615) Supplied on a sheet of yellow kabuki tape, these pre-cut masks supply you with a full set of masks for the canopy, with compound curved handled by using frame hugging masks, while the highly curved gaps are in-filled with either liquid mask or offcuts from the background tape. In addition you get a set of hub masks for all the wheels, allowing you to cut the demarcation perfectly with little effort. You also get another set of canopy masks tailored to fit the interior of the glazing so that you can paint the interior and give your model that extra bit of realism. Review sample courtesy of
-
1/18 - MiG-23BN " Flogger-H" resin kit by HPH - in design
Homebee posted a topic in The Rumourmonger
Big Flogger in design by HpH a 1/18th MiG-23BN "Flogger-H" Source: https://ipmsnymburk.com/forum/viewtema.php?ID_tema=39718 V.P. -
Source: http://www.cybermodeler.com/news/trumpeter.shtml Trumpeter's 1/48th MiG-23MLD "Flogger-K" kit is expected late August 2014 - ref.02856 V.P.
-
After the MiG-23BN "Flogger-H" (http://www.britmodeller.com/forums/index.php?/topic/234973404-148-mig-23bn-flogger-h-by-trumpeter-released/) Trumpeter is to release in late March 2016 a 1/48th MiG-27 "Flogger-D" - ref.05802. Source: http://www.trumpeter.cn/index.php?g=home&m=article&a=show&id=67&l=en Box art V.P.
-
Late entrant to this GB, so here goes. Have been on a Soviet roll lately (a I-16 and three straight Fulcrums) so what better way than with the quintessential Soviet fighter of the 1970s: the MiG-23 Flogger. Alas, the poor Flogger has been very badly neglected in The One True Scale. The Hasegawa kit is old and has raised panel lines, as does the Zvezda. The Academy pseudo-copy of the Base kit has them engraved but is rather shoddy and has major accuracy and detail issues. RS Models came out with a short-run series which was quite expensive. In comes KP with what appears to be a long-run version of the RS kit. Alas, the short-run nature of this kit is obvious the moment you open the box: despite superb panel line detailing, you can tell that it's going to have fit issues among other challenges. Still, it's the best Flogger kit on the market pending what I suspect will be an inevitable Trumpeter offering. I decided to go for a MiG-23M using the M/MF kit. I noticed that the instructions make no differentiation of the M and MF versions so I leave it to the experts to tell us what is so different (besides the avionics). The kit has decals for a Soviet version (Red 01) in camo colors with an interesting dolphin mascot but for accuracy's sake, I will be painting this in standard 70s overall gray. One of the more famous vintage pictures of the Flogger shows one in gray with Red 12 numbering so I will represent its unit brother, Red 10 by flipping around the Red 01. I find it hard to believe that there wasn't a Red 10 somewhere in East Germany ready to face off against NATO! Paints used are Akan from their MiG-23/25/31 set and look spot on. Part 1: Cockpit Not much to say here, the cockpit has detail but it's quite soft and definitely feels short-run quality. It would have benefited from some instrument panel decals to go over the raised detail as it's hard at this scale to paint accurately. The soft detailing also makes it difficult to give it a wash so I skipped it.
-
Well, I suppose, why not.......in the interests of balance I thought I would enter this MiG 23. I know its not the most accurate rendition, but hey, it looks like the silhouettes we got during our aircraft recognition training in the British Army - thats enough for me! The box seems misleading, calling it a MiG23S, which I believe was the Flogger A? So I think it is a MiG 23M, Flogger B? Exports called Mig 23MF? The big question is 1970s colour schemes.....I have been informed that DDR MiG23s delivered in the 70s came in the light grey scheme, but were later changed to the camo scheme. Later versions delivered in the 80s were delivered cammed up. The big Q is do I go grey or camo for the 70s - does anyone have any dated references? I have trawled the net but only found the camo painted airframes.....obviously data/pics are quite rare due to the Cold War. I have looked at Hi-Decal decals, lots of sets for various Russian aircraft, exported, the MiG 23 decals are for later 80/90s aircraft, but emblems etc seem standard sizes etc - so I may buy something a bit older to reflect this. Any advice welcome. It does seem I have a lot of kits on my bench (against my own rules!) , with the Mozzie GB coming up too....however some are relatively straightforward simple 1/72 builds, so hopefully I will have a decent chance of getting hem done. http://vignette4.wikia.nocookie.net/esm/images/a/a5/MH_136i-2.jpg/revision/latest?cb=20161227112147 Instructions via the web in the Minicraft guise! Worse case I can build a Soviet version out of the box which I think falls into the 1970s - again please correct me if needed.
-
A couple (or so) from Mitiga in 2007 .....
-
MiG-23MF "222" RoAF, Bucharest - Otopeni, Military Parade of 23 th august 1982
-
Finished yesterday. Hasegawa's MiG-27D kit, with many inaccuracies but at the end I'm happy with the result: first time painting with airbrush, first time using Mr.Hobby Aquoeos.
-
Mig-23BN Upgrade Sets (for Trumpeter) 1:48 Eduard We reviewed this kit from Trumpeter here at the end of 2015, and now we have some sets from Eduard that will add detail and ease the way with those sometimes awkward clear parts. As usual with Eduard's Photo-Etch (PE) and Mask sets, they arrive in a flat resealable package, with a white backing card protecting the contents and the instructions that are sandwiched between. Interior (49754) Consisting of two frets of PE, one of which is nickel-plated and pre-painted, plus a small slip of acetate sheet with the HUD glazing printed on, this set contains a full set of replacement instruments, which are pre-painted and laminated to provide a realistic-looking facsimile of the real things. In addition, the ejection set is detailed with new more in-scale parts; headbox details; a full set of seatbelts; seat controls and the important pull handle that gets you the fudge out of dodge in an emergency. The cockpit sills; the framing around the cockpit and detail inside, plus the instrument coaming are also addressed along with some handy rear-view mirrors to complete the job. You'll need to have a tiny length of 0.5mm diameter rod in stock to complete the canopy latch mechanism too. Exterior (48873) Starting with the wheel bays, this large brass fret adds a lot of missing details to both the main and nose gear wells; Additional gear-leg and wheel hub parts; gear bay door hinges; detailed splitter-plates and blow-in auxiliary doors on the intakes; tiny circular pressure relief doors on the underside of the aft fuselage; detail for the tail-bullet para-pack; A scale-thickness afterburner ring assembly; inner skins plus bay detail for the air-brakes; a number of aerials and sensors; and aft fuselage details such as chaff and flare dispensers. Weapons (48874) A small brass fret with a LOT of similar parts that adds essential details to the weapons, starting with skins for the ejector racks when empty; attachment points for the R-13M missiles; attachment points and fin-stabilising roller details for the R-60s, plus exhaust ring; and twelve sets of fins for the iron bombs with a template to align the fins before adding the tubular centre (that you must roll) and the box-like rear. FOD (48875) Foreign Object Debris (FOD) is taken seriously in aviation, so the moment an aircraft comes to a halt, technicians swarm in to secure areas that are susceptible. This set contains FOD covers for the AoA probes on the nose; main air intakes and the auxiliary doors on top and at the side of the intakes; and the exhaust. The real intake and exhaust covers have stiffening ridges moulded in, which in PE are replicated by deforming pre-etched areas outwards with the tip of a ball-point pen. Masks (EX492) A sheet of pre-cut kabuki tape is provided with outline masks for the curved windscreen and canopy, the centres of which you should fill either with liquid mask or scrap tape, plus wingtip and HUD glazing, with a bonus of hub masks for the main and nose gear wheels, allowing you to paint the tyres with a sharp demarcation. Review sample courtesy of
-
After its MiG-27K "Flogger-J2" (http://modelsua.com/MiG-27K-Kaira-Guillemot-NATO-Flogger-J2-1-72-Artmodel-7214.html) ArtModel has just released a 1/72nd MiG-27M/D "Flogger-J" kit - ref.7216 Source: http://modelsua.com/MiG-27M-D-Flogger-J-ground-attack-aircraft-1-72-ArtModel-7216.html The image in the ModelsUA homepage is a picture from a 19.Gv.APIB MiG-27D "Flogger-J" - bort 24 yellow, c/n 61912559200 - taken in the early nineties at Lärz (Mirow) in Germany. More about the MiG-27D/M & K based in Germany: http://www.16va.be/3.3_appui_tactique_part1.html http://www.16va.be/3.3_appui_tactique_part2.html http://www.16va.be/galeries_vvs/mig-27/imgcol/index.html http://walkarounds.airforce.ru/avia/rus/mig/mig-27k/index.htm V.P.
-
MiG-23ML Pictures by Sven Harjaek taken at La Bourget museum Paris.
- 1 reply
-
- MiG-23
- Mikoyan-Gurevich
-
(and 1 more)
Tagged with: