Search the Community
Showing results for tags 'charger'.
Found 6 results
My build of Dom's Charger Revell kit from The Fast and the Furious. Painted with Tamiya TS paints, with some light weathering done with oils and pigments. To modify the kit to be a bit more accurate to the movie, I added more supports for the roll bar, trimmed the license plate off the front, omitted the passenger seat, and moved a fire extinguisher to the floor. Also pictured is a comparison with my first ever model kit build, the '68 Charger. I'm very proud of the progress I've made the last 3 years of model building.
Akatombo Works project for 2020 is a 1/72nd Convair Model 48 Charger resin kit - ref. Source: http://akatombo.air-nifty.com/akatomboworks/2019/09/post-c03c77.html V.P.
The £10 Charger challenge
chrisrope posted a topic in Work In Progress - VehiclesHi Here is my first car WIP I’ve done. This will be a bit down and dirty, as will become apparent, but a good trial before I crack on with my other car kits. So, I have been building up a stash of car kits, mostly US muscle cars. The one I have the most of is my favourite, 68-70 Dodge Charger, of which I have 6 kits The MPC General Lee kit is legendarily bad. It’s one good feature is the 69 bodyshell. While this shell is not the best, the rest of the kit is pretty much garbage The 68 Revell Charger is a peach. That is unless the previous owner slathered the sprues in some sort of primer with a brush and damaged the screen pillars This kit cost me £10, the inspiration for the thread title I got the MPC in a swap and initially only planned to use the General Lee parts on another Revell kit. I couldn’t bin the rest so started to do bits on the shell as a test mule and to see if I could improve it. I reinforced the rear valance and made a spare Revell bonnet fit as the MPC one is too narrow. The Revell is wider so was easy to get a satisfactory fit. Test fit of the MPC shell on the Revell chassis Fits Like A Glove All the pick up points appear to match perfectly. However, the MPC has the inner wings on the chassis, the Revell on the shell. Only one thing for it Chop the damaged Revell shell and cut out the inner wing section...... ......and test fit with the MPC shell on Revell chassis God damn it’s gonna work...... so far. I know the interior tub fits but neee to check the sides, dash and firewall The £10 Charger Challenge is on
REVELL/ICM TU-144 1/144
pierre Giustiniani posted a topic in Ready for Inspection - AircraftHi Gents and Happy New year !! The last one of 2016 for a forecoming issue of Wingmasters. The Russian copy of the Concorde. All the best Pierre
Ok so there is a story to this build. It's a long one so I'll try my best to keep the soppy stuff to a minimum. Last year I decided to build a model car for each of my closest friends as a Christmas present. My best friend's favourite car was the 1969 Dodge Charger, a kit I new well as I'd build one as a kid. And after quizzing her about what her ideal Charger would be it dawned on me that there was to be a problem with the Revell Monogram '69 kit. Namely that the body in the kit comes with a molded on vinyl roof. But after a bit of research it turned out that the recent '68 release, the same kit but with a new chrome fret, had a body without a vinyl roof but told you to paint it like it had. Problem solved. Get the two kits and swap the bodies. I liked that idea too as it allowed me to build a companion '68 car to act as a sudo friendship bracelet or something to similar effect. I got the info I needed from my friend on how her dream Charger would be and the specs were thus: Black paint without the vinyl roof, Magnum 500 wheels, No R/T stripe over the boot, Black leather interior. (I took a liberty with the wood effect) And this was the result: Unfortunatly those are the only pics I have of the model before I packed it safely in its box and wrapped it up for her present. Now for the sad part. Not long after I wrapped it up we started getting into fights and having big fallouts. In the end I had to walk away coz it was too upsetting and was actually depressing me to a large extent. I did deliver the present and left it as a parting gift. We did reconcile earlier this year, and for a couple of months everything was fine. Then complete silence which became clear was intentional. Too this day I have no idea why. And so the completion of this once friendship project was on hold. After the completion of her '69 Charger the kit was packed away so I could focus on the other builds I needed to complete for presents, with the intent to complete the project in the new year. However because of what had transpired and what followed the kit remained in the stash. At times even the thought of the kit was enough to invert my mood for a week. Everything was just too painful. However more recently I've been getting on with things and forgetting the past. I reached for a Shelby mustang that I started the engine on at the same time as the '69 Charger and before I knew it the '68 kit was out and I wasn't sad or upset. It felt like the right time to build it. And so now that I've finished the Lancia and with all the other builds I have on-going stalled, it's moved onto the workbench. My plan for this kit was to use these: Some may recognise 2 of them from my for sale page. Well with no interest in them I've decided to cannibalise the parts I want. The Centreline wheels from the Shelby using the tyres and backing plates from the 'Cuda will adorn my '68. I did plan on using the Hemi from the 'cuda too but it doesn't fit. So the 440 Magnum engine will do. Not sure whether to do it the correct period Chrylser engine blue or as the change over year to engine red was '69, just paint it like the previous one? I am also using the optional hood i.e the one with the big scoop and it will be painted satin black with the vinyl roof being matt black with the black r/tstripes on the rear. The colour is going to be ford signal green as I have half a tin of it left over from a Hakosuka build. No pics of said build yet as I'm still fettling the body ready for primer and filling some pin marks on some panels that need to be painted body colour. Hope I haven't bored anyone with my story lol TTFN Ashley Edited to lessen the soppiness
Aftermarket 1/25 Wheels + Tyres. Muscle cars
chrisrope posted a topic in Vehicle DiscussionJust picked up Revell Monograms rather nice 69 Charger. The 'stock' wheels are a bit underwhelming so I'd like to replace them. Is there a good source for Aftermarket 1/25 muscle car wheels and tyres. I want some of these really http://www.americanracingwheelsinfo.com/American_Racing_Vector_SE.htm They are the wheels fitted to the General Lee but they suit the Charger well. Cheers for any help Chris