Search the Community
Showing results for tags 'Strasbouirg'.
-
French Battleship Strasbourg HobbyBoss 1:350 The battleship Strasbourg was ordered on 16 July 1934 in response to the Italian Littorio-class battleships. The ship was laid down on the N°1 slipway of the civilian Penhoët Shipbuilding Yards, at Saint-Nazaire, which had been built to accommodate the 313-meter long keel of the liner SS Normandie. She was launched in December 1936. Once fitting out was completed, she left Saint-Nazaire for Brest on March 15, 1938 for her acceptance trials. The Strasbourg was commissioned in April 1939, joining the French Atlantic Fleet, and forming, with Dunkerque, the 1ère Division de Ligne (1st D.L.). White bands were painted on the funnel, in March 1939, a single one on Dunkerque as Division flagship, two on Strasbourg. After an official visit to Lisbon (Portugal), for the commemoration of the discovery of Brazil by Alvares Cabral, both battleships, accompanied by three modern light cruisers of the 4th Cruiser division, visited various ports and Royal Navy bases, such as Liverpool, Oban, Staffa, Loch Ewe, Scapa Flow, and Rosyth, returning to Brest after a four-day call at Le Havre. In the first days of September 1939, the Force de Raid, under Vice Amiral d'Escadre (Squadron Vice Admiral) Gensoul on Dunkerque, including the 4th Cruiser division, plus eight large destroyers were based in Brest. Reports came in, (that later proved incorrect), that German Pocket-Battleships had been sighted, and the force left Brest immediately to stop them from passing into the Atlantic. Soon after this, it was decided to split the Force de Raid into hunting groups against the German surface raiders, which also incorporated Royal Navy warships. In October–November 1939, Force X, under Vice Admiral Duplat, on the French heavy cruiser Algérie, along with Strasbourg, the French heavy cruiser Dupleix and the aircraft carrier HMS Hermes, was based at Dakar and vainly undertook sweeps trying to find Admiral Graf Spee. When Strasbourg returned to Brest, 800 of her powder charges remained in storage at Dakar. During the battle of Dakar, this powder was used by Richelieu and was (wrongly) implicated in the explosion of Richelieu's upper turret 380 mm gun barrels. The Force de Raid was despatched, on April 2, 1940, to the Mediterranean to counter uncertain Italian intentions during the spring of 1940, but, some days later, was ordered to return to Brest to provide cover for an eventual Allies' reaction to the German landings in Norway, on April 9, 1940. Finally the Force de Raid was ordered to Mers-el Kebir on April 24, 1940. The only test in battle for Dunkerque and Strasbourg came in the attack on Mers-el-Kébir, after the fall of France, the battleships, HMS Hood, HMS Resolution, and HMS Valiant from Force H. The French battleships had not been designed to confront these heavily armed battleships. They were also complete taken by surprise when the attack took place on July 3rd 1940. The tightly packed vessels of the French fleet still having their turrets trained fore and aft. The old super-dreadnought, Bretagne, was badly hit, and her magazines exploded, causing the ship to blow up, capsize and sink, taking nearly 1,000 seamen with her. Strasbourg, commanded by Captain Louis Edmond Collinet, had managed to cast off and make head-way. A 15-inch (381 mm) salvo just missed he and at 18.00, another 15-inch salvo fell where her stern had been one minute previously. Escorted by five destroyers, she headed to the entrance, and then steered northeast. Strasbourg increased speed from 15 knots to 28 knots but was hampered by damage to an air intake on the funnel, which had been blocked by a piece of flying masonry from the jetty. However she escaped the pursuit by Hood and Fairey Swordfish torpedo bombers of Ark Royal until about 21.30. At this moment, all thirty boiler room 2 personnel were found lying unconscious, overcome by the heat and the toxic fumes, and three petty officers and two seamen had died. Passing alongside the western coast of Sardinia, Strasbourg reached Toulon, in the evening of the following day. With Bretagne lost, Dunkerque and Provence severely damaged, Lorraine interned at Alexandria, Courbet and Paris seized in Great Britain, only four heavy cruisers of seven and three light cruisers of twelve remained under Vichy control in Mediterranean waters, and with the Atlantic harbours under German occupation, a reorganisation of the Vichy French naval forces had to be carried out. The 1st (fast battleships) and 2nd (slow battleships) Divisions de ligne and the Atlantic Fleet were dissolved, in August 1940 and new Forces de Haute Mer (High Sea Forces) were created, with Admiral de Laborde appointed as C. in-C., on September 25, 1940, and raising his flag on Strasbourg, which had had the lower bridge tower modified to better accommodate an admiral and his staff. Although the Strasbourg was the flagship of the so-called High Seas Forces, she rarely went to sea, due mainly to the lack of fuel, but did escort the Provence which was returning to Toulon in November 1940. She received three more single 13.2 mm Browning CAS machine guns in 1941, and in 1942, a so-called détecteur électro-magnétique, the French equivalent of an air and sea search radar was fitted. Four small rectangular antennas were fitted atop the main yards. Early tests indicated a range against aircraft of 50 km. Strasbourg was still at her moorings of the Milhaud piers at Toulon when the Germans invaded the so-called "Zone libre", in retaliation of the Allies' landings in French North Africa. On November 27th 1942, when the Germans attempted to seize the French warships remaining under Vichy control, she was scuttled by her crew as part of a pre-planned effort to keep the ships from being turned over to the Italian Navy. She was refloated July 17th 1943 by the Italians, but the armistice between Italy and the Allies in September 1943 halted these activities and the ship was taken over by the Germans. On April 1, 1944 they handed her back to the Vichy French authorities. Her wreck was then towed to the Bay of Lazaret, where she was heavily bombed by the US aircraft, and sunk, three days after the August 1944 landings, as part of the preparations for liberation of Toulon. She was raised for the second time on 1st October 1944 but found to be beyond repair. She was then used as a test hull for underwater explosions until condemned and renamed Q45 on 22 March 1955, to be sold for scrap on 27 May that year The Model Hobbyboss are continuing to release plenty of new and exciting maritime subjects. They have now released the sister ship to the Dunkerque, and while there are many similarities between the two kits there are enough differences between the two ships to keep them interesting. The kit comes in quite a large, longish box, with an artist’s impression of the ship at speed on the ocean. Inside there is the single piece hull, which, according to my research and the Seaforth book on French battleships, by John Jordan and Robert Dumas, is actually pretty accurate. Although, as with the earlier release, the two lower strakes down the side of the ship need to be sanded back a bit as they shouldn’t reach the bow. The rest of the parts, nine separate pieces, twelve sprues of grey styrene, and two sprues of clear styrene are all beautifully moulded, with no flash or other imperfections but quite a few moulding pips. The kit also comes with six sheets of relief etched brass, a length of chain and a small decal sheet. Construction begins with the drilling of several holes in the foredeck and main deck. The three deck sections are then glued to the hull. Unusually there are no bulkhead parts to strengthen the hull, so check first as you may need to add thwart ships beams for added rigidity. With the decks in place the foredeck is fitted out with three capstans, three lengths of chain, suitably painted, and the three, two piece bow anchors. At the stern there is a single capstan, chain and another two piece anchor. Several sub assemblies are the built up, six two piece searchlights, eight double carley float assemblies, four three piece twin 37mm cannon mounts and eight quad 13.2mm cannon mounts. The hull is turned upside down and fitted with the two bilge keels and four propeller shafts, A frames and propellers, along with the single rudder and two stern mounted boat booms, which should probably be left till nearer the end of the build. The PE and styrene catapult is also assembled at this point and put to one side to dry along with the two quadruple main turrets, each made up from thirteen parts. The twelve ships boats, each with separate decks and PE cradles are also assembled at this point, along with the eleven piece main mast and rear mounted armoured control station. The upper and middle rangefinder turrets are also assembled, from nine and eleven parts respectively. Moving to the foredeck again, the area is fitted out with the various cleats, bollards, deck houses, ventilators, the jackstaff and the large breakwater, along with a couple of paravanes. The main deck is given the same treatment, and four of the ships boats. The quarterdeck is also fitted with cleats and bollards. Six more of the ships boats are glued into position, along with the various boat booms, carley float assemblies, accommodation ladders ensign staff and inclined ladders. The secondary turrets are assembled, the two twin turrets from four parts and the three quadruple turrets from seven parts. The ships cranes are built up from four styrene parts are three etched parts. The assembly of the superstructure begins with the assembly of the ten piece funnel searchlight platform onto which four searchlight assemblies are fitted. The lower bridge is then assembled, and the rest of the ships boats are on fitted onto the boat deck section, along with the two boat cranes and four inclined ladders. The searchlight platform assembly is fitted to the fore end of the aft superstructure, along with eight carley floats and two small rangefinders. Amidships there is longitudinal bulkhead with deckhouses either side fitted in the centre of the deck. Either side, a twin 37mm and quad 13.2 mount are glued into position, whilst just behind the base of the aft rangefinder tower there is a large tubular mount for another quad 13.2mm mount. The hanger door is then attached while on the hanger roof, two paravanes, a ventilator and eight carley floats are glued in place. Along each side of the superstructure there are numerous armoured hatches, vertical ladders and cable reels attached. The lower bridge deck is built up from three sub-structures, six support beams, and eleven PE supports before being fitted with the lower bridge assembly, a medium rangefinder, two small rangefinders, lower tower block and a quad AA mount. The next level platform is fitted with four lookout stations and two searchlights. Onto this platform the upper tower block is attached, followed by another platform. The larger of the three rangefinders fitted to the tower is assembled and the two smaller units fitted to each others roof. The topmost rangefinder is fitted with an elaborate PE aerial array. The upper tower is also fitted with three large aerial spreader bars before being attached to the lower tower and the whole assembly being glued to the front of the boat deck, followed by the fifteen part funnel assembly. The completed structure is then glued to the main deck, followed by the aft superstructure, main and secondary turrets, catapult and nine piece aircraft handling crane. The model can be displayed onto the four piece stand included. The kit comes with two of the Loire 130 seaplanes the ship carried, each is produce in clear styrene, which, I must admit I’m not a fan of, but it can help with the clear sections I guess. The fuselage is in two halves, which, once glued together are fitted with the tailplanes and wings, each of which has separate floats. The engine and separate two bladed propeller is the attached to the top of the fuselage. Decals The small decal sheet provides the French national flags in straight and wavy forms; ships name plates, national stripes for B turret and the aftermost 130mm turret, plus the roundels and fin flashes for the aircraft. They are nicely printed with good opacity and in register. The ship is painted in Dark Sea Grey overall, with black boot topping and red antifouling. Conclusion This is another very welcome release, giving the modeller the option of making either/or both of a very attractive ships. Since they got the Dunkerque right, it’s natural that this kit is also pretty accurate. Unfortunately Hobbyboss still haven’t provided enough railing for the whole ship, meaning the modeller will have to provide the main deck, quarterdeck and foredeck railings themselves. That said, it’s still a great looking kit. Review sample courtesy of