Search the Community
Showing results for tags 'Sky Models'.
Found 2 results
-
Dear fellow Britmodellers, here's my 1/72 AZ Model Bf-109 G10 Erla in markings of II. Gruppo Caccia ANR, in Aviano, early 1945. This aircraft was flown by Cap. Ugo Drago, Italy's third most successful Italian fighter pilot of World War II (25 victories). I built with Brengun photo-etch, Rob Taurus vacu, Master gun barrels and pitot tube and Sky Models decals. Photos by Wolfgang Rabel. For the color scheme, I refered to Eduard's instructions of their 48 scale kit (82164). The model was painted with Mr.Hobby acrylics. The markings were cobbled together from various sources - the Balkenkreuze are from the AZ Model box, the Italian flags and "Black 7" from Sky Models ("German Aircraft in Italy", SKY 72-024). The Werknummer (491 353) is not included and was taken from Print Scale's "Bf-109 Kurfürst (72-145)" sheet containing individual serial numbers which I painstakingly applied one by one. Thank you very much for your interest in this topic.- 16 replies
-
- 54
-
-
-
-
- Brengun
- Sky Models
- (and 1 more)
-
Hello and thanks for your interest in this topic. This is my 1/72 Airfix Fw-190 A8 dressed as a "Sturmbock" of II/JG4. This particular aircraft is well documented on color pictures (seen here: http://www.clubhyper.com/reference/luftcambg_5.htm). It was piloted by Walter Wagner on January 1, 1945, participating in"Operation Bodenplatte". It was hit by flak during the attack over St. Trond airfield, when the engine died and the pilot had to make and emergency landing. The plane was captured by the US Forces and sent for evaluation. It later carried an all-red color, decals for the caputred version are available from aftermarket manufacturers as well. This aircraft had black/white/black RVT bands (denoting JG 4) and the emblem of the left side of the fuselage only. I added additional side armor from the Brengun etch set, which also provides various antennas and cockpit interior. To my chargin, the left armor plate lifted off with a "ping!" during the paint session and would not go back into position by any means, which spoils the look of the model from a certain angle. Nonetheless I decided to finish the build wtih it's flaw. The decals are from Sky Models Italy, are of reasonable quality and can be recommended. The sheet also provides the spinner spiral. Painted with acrylics from the Gunze/Mr.Hobby range, weathered with artist's oils and pastel chalks. The red blotches on the fuselage represent primer spots, as seen in the original pictures, and have been hand-painted using Vallejo colors. Pitot tube is a metal piece from Master Model. All photographs by Wolfgang Rabel of IGM Cars & Bikes - a big 'thank you'! Here's some in-progress shots I took during construction stage. The fuselage halves were badly warped, evident in this picture: ... and so were the wings ... Cockpit with Brengun etch, very little can be seen afterwards: Fixing the side armor panels was a difficult task due to the curvature of the fuselage: Thanks for your interest ... and off we go for another mission in the ever expanding universe of Plastic Modelling! Until next time, take care, and all the best from Vienna/Austria! Roman
- 13 replies
-
- 18
-