Jump to content

Search the Community

Showing results for tags 'SU-22'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Calendars

  • Community Calendar
  • Group Builds
  • Model Show Calendar

Forums

  • Forum Functionality & Forum Software Help and Support
    • FAQs
    • Help & Support for Forum Issues
    • New Members
  • Aircraft Modelling
    • Military Aircraft Modelling Discussion by Era
    • Civil Aircraft Modelling Discussion by Era
    • Work in Progress - Aircraft
    • Ready for Inspection - Aircraft
    • Aircraft Related Subjects
  • AFV Modelling (armour, military vehicles & artillery)
    • Armour Discussion by Era
    • Work in Progress - Armour
    • Ready for Inspection - Armour
    • Armour Related Subjects
    • large Scale AFVs (1:16 and above)
  • Maritime Modelling (Ships and subs)
    • Maritime Discussion by era
    • Work in Progress - Maritime
    • Ready for Inspection - Maritime
  • Vehicle Modelling (non-military)
    • Vehicle Discussion
    • Work In Progress - Vehicles
    • Ready For Inspection - Vehicles
  • Science Fiction & RealSpace
    • Science Fiction Discussion
    • RealSpace Discussion
    • Work In Progress - SF & RealSpace
    • Ready for Inspection - SF & RealSpace
  • Figure Modeling
    • Figure Discussion
    • Figure Work In Progress
    • Figure Ready for Inspection
  • Dioramas, Vignettes & Scenery
    • Diorama Chat
    • Work In Progress - Dioramas
    • Ready For Inspection - Dioramas
  • Reviews, News & Walkarounds
    • Reviews
    • Current News
    • Build Articles
    • Tips & Tricks
    • Walkarounds
  • Modeling using 3D Printing
    • 3D Printing Basics
    • 3D Printing Chat
    • 3D Makerspace
  • Modelling
    • Group Builds
    • The Rumourmonger
    • Manufacturer News
    • Other Modelling Genres
    • Britmodeller Yearbooks
    • Tools & Tips
  • General Discussion
    • Chat
    • Shows
    • Photography
    • Members' Wishlists
  • Shops, manufacturers & vendors
    • Aerocraft Models
    • Air-craft.net
    • Amarket Modl
    • A.M.U.R. Reaver
    • Atlantic Models
    • Beacon Models
    • BlackMike Models
    • Bring-It!
    • Copper State Models
    • Freightdog Models
    • Hannants
    • fantasy Printshop
    • Fonthill Media
    • HMH Publications
    • Hobby Paint'n'Stuff
    • Hypersonic Models
    • Iliad Design
    • Hobby Colours & Accessories
    • KLP Publishing
    • Kingkit
    • L'Arsenal 2.0
    • Litaki Models
    • Maketar Paint Masks
    • Marmaduke Press Decals
    • MikroMir
    • Model Designs
    • Parkes682Decals
    • Paulus Victor Decals
    • Red Roo Models
    • RES/KIT
    • Sovereign Hobbies
    • Special Hobby
    • Test Valley Models
    • Tiger Hobbies
    • Ultimate Modelling Products
    • Videoaviation Italy
    • Wingleader Publications
  • Archive
    • 2007 Group Builds
    • 2008 Group Builds
    • 2009 Group Builds
    • 2010 Group Builds
    • 2011 Group Builds
    • 2012 Group Builds
    • 2013 Group Builds

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 17 results

  1. Polish Su-22 the export version of the Su-17. Pics thanks to Jacek.
  2. Hello to all of you. Here is my IRGC 1:72 Scale KP Su-22m4.The kit is pretty much OOB.I used Tamiya Ak real and gunze colors to paint is.The decals are from Model Maker and they performed great. No issues whatsoever. I have also made a video of the whole build process so if you are interested here is the link bellow. Regards,Dragan
  3. Hello. I have just finished this nice Su-22 kit from Kitty Hawk in 1/48 scale. It is the replica of the Yellow 77 unit from the Ukrainian Air Force. The cockpit and Canopy is detailed using Eduard's photo etch upgrade set and crew boarding ladder from "Part".
  4. My eleventh build of the year comes in the shape of this German Air Force WTD.61 Sukhoi Su-22 M4 30918 98+14. This was known as the official "Last Flight Su-22" which had its service life extended in order for its last flight to RAF Scampton where it currently resides. 1/72 Bilek/Italeri kit. Pavla cockpit & Canopy. Airwaves etch. Scale Aircraft Conversions landing gear. Armory resin wheels. Master brass pitot probes & gun barrels Hi Decal & Propagteam decals. Ammo Mig, Hataka & Vallejo acrylics. Also many thanks to Andre "Hook" for the Aphid missiles & rails. Thanks for looking! Martin
  5. Su-22 Fitter K | 1/144 | Minicraft Hungary I finished this one on 6/7/2020. The Su-22 is the export version of the Su-17 Fitter, which itself is a variable geometry adaptation of the Su-7 Fitter. If you love masking this is the kit for you! Not only did it have a 4-color camouflage scheme, but the pylons had to be masked for 3 different colors and the flash-guard by the guns had to be masked. It was still quite a bit of fun. I purchased this a couple years ago for practically nothing (maybe $5?). At the time I was really getting into Sukhoi aircraft and it seemed like the 1/72 kits of this plane were either hard to find or expensive, so this fit the bill at the time! The kit was better than most Minicraft 1/144 models I've done, however it confirms my first law of modeling: If something is designed to be shown in one position, it will look terrible in another position. In this case, the canopy was designed to be shown open, so of course, gluing it closed revealed a large gap at the bottom of the canopy. If I'd known it early in the build, I would've filled it, but as is I left it because it's hard to see when its on the shelf. Paints: Mr. Surfacer 1500 black > Mr. Color 303 / 302 / 312 / 310 top > Hataka RLM 65 / Ak interactive polished aluminum (bottom) Decals: Kit decals This picture's a little blurry but shows the different metal shades used: Alclad Stainless Steel (with a dusting of dark aluminum) for the gun flash-guards, Alclad RAF high speed silver for the drop-tanks and lower half of the pylons, and Testor's gunmetal for the guns. Thanks for looking! Questions, comments and constructive criticism welcomed!
  6. Set for correcting the shape and size of wing fences of the Su-17/Su-22 model in 1/48 scale manufactured by Kitty Hawk. Cast from polyurethane resin.
  7. Set for correcting the inlet cone of the Su-17/Su-22 model in 1/48 scale manufactured by Kitty Hawk/Hobbyboss. Cast from polyurethane resin. For photo painted silver and black.
  8. Detail for correcting the belly of the fuselage of the Su-17M4/Su-22M4 model in 1/48 scale manufactured by Kitty Hawk. Cast from polyurethane resin.
  9. Sukhoi Su-17 M3/M4 Fitter-K 1:48 Kittyhawk The Su-17, with its NATO reporting name Fitter was derived from the earlier Su-7 as a project to improve its low speed handling, particularly during take-off and landing. It was Sukhoi's first attempt at variable geometry wings, and when it reached service was the Soviet Union's first swing-wing aircraft in service. To keep the project costs down, the centre section of the wing remained fixed, with the outer able to swing back for high-speed flight, and forward for slow. A pronounced spine was also added to the rear of the cockpit to carry additional fuel and avionics that were necessary with the advances in aviation. The first airframes reached service in the early 70s, and were soon replaced by more advanced models with the designation M3 and M4, designated Fitter-H and –K respectively by the Allies. The M3 was based on a larger fuselage and had additional weapons options, while the M4 was further developed and was considered to be the pinnacle of the Fitter line with a heavily upgraded avionics suite including improved targeting, navigation, and yet more weapons options, as well as improved engines. A downgraded version of the M4 was marketed as the Su-22M4, and was in production until 1990! Although the Su-17 was withdrawn from Soviet service in the late 1990s, it remained in service much longer in its export guise, where it was used by both Iran and Iraq, Libya and Angola to name but a few, where it had variable success, which likely had as much to do with pilot skill and training as the merits of the airframe. The Kit A new Su-17 model has been needed for a few years now in 1:48, and this is a new tooling from Kittyhawk that dropped onto our radar relatively recently. The previous best kit was getting a bit long in the tooth, and needed plenty of TLC to coax a good model out of it. The box is fairly standard Kittyhawk (KH) fare, with a pair of Su-17s in formation on the lid, and inside, plenty of plastic in their familiar pale grey styrene. The sprues are large, and it appears that their annoying habit of folding sprues over while still warm is dying out slowly, with detail and crispness on the increase. Gone also are the large ejector-pin turrets in every intake, although a few are still there in the engine parts, but won't be seen. The fuselage is split fore-aft, which hopefully means we'll be treated to a two-seat UM in due course, but as always don't hold your breath, just cross your fingers. The usual generosity in terms of weapons and stores is still present, with almost a third of the sprues devoted to things to hang off your finished model, which is always nice to see. Inside the box are nine sprues in light grey styrene, one in clear, a small sheet of Photo-Etch (PE) brass, and two decal sheets, one of which is substantially larger than the other. The instruction booklet completes the package, and first impressions are good – it might even get a build review if I can find the time! Construction begins with the ejection seat, which is nicely detailed with PE belts included, which show a lot more detail than previous efforts from KH, which is good to see. The cockpit is built from a series of parts, including the control column, rudder pedals, side consoles and the instrument panel, the last two of which have decals provided for the instrument details. The coaming and HUD are added to the front of the cockpit, with a clear part forming the HUD glazing. Following this the engine is constructed from quite a number of parts, with only the aft end visible if you left off the aft fuselage section, which is possible although not considered in the instructions. The exhaust nozzle is built from sections and surrounded by a ring, showing the actuators around its circumference, which when painted should give a good impression of the original. The engine and exhaust are then sandwiched between the forward part of the aft fuselage, and the aft part of the aft fuselage (confused yet?) is built up with air-brake bays and added around the exhaust. Jumping around somewhat confusingly, the tail with separate rudder is then made up, followed by the nose gear bay, which is again made from individual panels for extra detail. The gear leg is fitted at this stage, but with some care could be left off until later if you feel it would be safer to do that. The cockpit, nose bay and the intake shock-cone (including clear panel) and then trapped between the forward fuselage halves, and this is mated to the aft section, at which point the avionics spine is added in sections, which overlap the fuselage joints for strength. Detailing the fuselage with a host of small, delicate parts seems a little optimistic to this ham-fisted modeller, but if you fancy your chances, go ahead. There are a number of scabbed-on chaff and flare dispensers down the fuselage sides, which are provided with PE attachment brackets that will require a little bending to put in position, so steel yourself if you're not a big fan of PE. The twin prongs on the nose are also added, the pitot probe having all the usual vanes added from styrene parts that are VERY small, so take care not to lose them. The windscreen fits to the sill around the coaming, and the canopy is designed to be posed open, with a styrene fitment to the rear that mates with the notch behind the cockpit. At this stage of the build your Fitter looks little more than a fancy tube with a wheel at one end and a fin at the other. The wings are built as assemblies next, although I'd be tempted to leave off the gear again for fear of breakage, but the instruction advise otherwise. The main gear legs are single parts with three small ancillary struts, one of which stabilises the large captive bay door that hangs down outboard of the leg. The gear bay roof detail is moulded into the underside of the upper wing, while the walls are added separately, as are the optionally open gun bays in the leading edge of the inner wing section. The outer wings are made up from a single centre section with separate flaps and slats, which then attach to a pin in the outer edge of the inner wing section, held in place after the addition of the lower half. A small bay door, actuator jack for the gear and the aforementioned gun bay doors are added underneath, and above the two large strakes fit into their respective slots. Repeat in a mirror for the other wing, and you're done. The wing roots fit into their slots in the fuselage, where you will also find an inner main bay wall, so remember to paint that when you're doing the rest of the bay, or you'll end up cursing. The elevators are both single parts that fit on a pivoting pin, and with the addition of the inner wing flap sections that's the main build done. As already mentioned, there are a substantial quantity of weapons for the many pylons on the inner wings and belly. The decision to place all the weapons on the static parts of the airframe saved money and weight developing rotating pylon mounts such as those seen on the Panavia Tornado. In the box you get the following: 2 x BETAB-500 iron bombs 2 x OFAB-250-SZN iron bombs 4 x FAB-250-M54 iron bombs 4 x FAB-250-M62 iron bombs 4 x SAB-100 flare 2 x RBK-500-250 cluster bomb 2 x FAB-500-M54 iron bombs 2 x Fuel Tanks 1 x SPS-141 ECM Pod 2 x B-13 122mm rocket pod 4 x F2B-250-TS iron bomb 2 x KH-23 Kerry missile with APU-68 adaptor rail 1 x SPPU-22 23mm gun pod 2 x UBK-23 gun pods 2 x B-8M rocket pods 2 x S-25L rocket 2 x UB-32 rocket pods BATAB-500-ZD bunker buster bomb 2 x S-24 rocket 2 x R-73 Archer A2A missile 2 x R-60 Aphid short-range A2A missile 1 x KKR-1T Recce pod Quite a list! The parts are all well-detailed, with separate fins and nosecones where applicable, exhausts and other parts including further adapter rails all supplied. The decal sheet contains stencils for them all, with a double page giving a complete stencilling and painting guide. Markings There are a generous seven decal options with the kit, all of which is detailed in the centre pages of the instruction booklet, folding out to double size, which although it disrupts the flow of the construction a tad is an improvement on their early kits, as you at least get a full set of profiles from the major angles, and it is all of a reasonable size. These pages are in colour, and you can pull them out of the booklet if you feel the need, which I did a moment ago. From the box you can build one of the following: Su-17M3R 313 ORAP based at Vizavi Bagram, May 1988 – green/earth camouflage over blue undersides wearing red 01. Su-17M4 43rd OMShAE, Black Sea Fleet, Gvardeiskoe Field, Crimea, Jan 1998 - green/earth camouflage over blue undersides, wearing yellow 40. Su-17M4 274th APIB, Afghanistan 1988 - green/earth camouflage over blue undersides, wearing blue 23. Su-17M3 Russian Air Force, red 95 – all over natural metal. Su-17M4R 886th ORAP, 15th VA Afghanistan war - green/earth camouflage over blue undersides, wearing blue 07. Su-17M3 red 50 – green upper over blue undersides. Su-17M4 Ukrainian Air Force – green/earth camouflage over blue undersides, wearing Yellow 50. Previously, Kittyhawk's decals have been of variable quality, but there is an improvement in this sheet, although there is a small mis-registration of the white or red that affects a couple of the decals with borders, but it shouldn't notice too much. Otherwise the other colours are in good register, sharpness is better, as is colour density. The smaller sheet contains the instrument panels and some emblems that required a different printing process. Conclusion A modern tooling of this aircraft, with its aggressive look and wide use, was long overdue and this scale and now it's here. Detail is good from the box, the weapons provided are unbelievably generous in scope and quantity, and improvements to the engineering and finish of the kit appear to have been made. I haven't been over the kit with a fine toothed-comb checking each rivet yet, but I'm sure any inconsistencies will come out in the wash, as no kit made by imperfect beings such as us can be absolutely perfect. The discussion has started already in the Rumourmonger forum for those that are interested here. Highly recommended. Review sample courtesy of and available soon from major hobby shops.
  10. I'm continuing with a series of jets and presenting my last completed model. SU-22M4 Iraqi Air Force. This plane flew at the end of the Iraq-Iran war, but also during the first desert storm. Here is picture , enjoy.
  11. Its been a while since I have posted an RFI (work, travel and children!), but here is the 1:48 KittyHawk SU-22M4 Fitter. Not a kit to cut your teeth on, but certainly not as bad as some of the online reviews would have you think. My biggest issues were: The multi-part fuselage (take your time and try not to introduce an error, ask me how I know!). Wing Fences needed a little bit of dry fitting, trimming and fettling (not that difficult). Pylon locations were indistinct and the instructions were vague and missing detail. Jet pipe was too long, easy enough to cut out a section. Nose cone has no wedge shaped splitter, either FOD guard it or use AM. However there are some very good bits in regards to the kit, the wing fit was exceptional. Huge selection of stores and a plethora of potential options for users both in the kit decals and aftermarket. Aftermarket used: Eduard Interior 49829 Eduard Brassin B-8M1 Rocket pods and pylons 648 041 CWS nose cone Wolfpack resin seat Master Pitot (very, very fragile) and Model Maker decals and stencils (really thin and lots of stencils, instructions got a bit vague with the high numbered stencil identification but they are reccomended) Paints were Gunze with levelling thinners, oils used for cockpit, seat details, wash and weathering. I have been informed since taking the pictures that the dorsal spine blade aerial has been updated, so that's a minor job for later this week to scratch and correct.
  12. I'll be building the new Kitty Hawk release of the Su-17 Fitter which will be built as a Polish Air Force Su-22M-4 from 8.elt. I have ordered Model Maker decals and I have the Hataka paint set specifically for this aircraft. I also have some Armour wheels, Master pitot set and a few other bits n bobs but I'm not sure what will be used yet.
  13. 1/48 swing-wing Fitter could be next Avantgarde release after the Foxhound, Tomcat and Albatros. Unconfirmed speculation at local modelling discusions but here are some connections between the AMK and Czech modellers.
  14. Some of the original OEZ/Kovozávody Prostějov's (KP) classics Sukhoi 1/48th kits were becoming difficult to find. They're to be re-released soon by SMĚR (http://www.smer.cz/en/). ref.0853 - Su-7BKL "Fitter-A" - http://www.1999.co.jp/eng/10326152 ref.0854 - Su-7BMK "Fitter-A" - http://www.1999.co.jp/eng/10326153 ref.0855 - Su-17/22M-3 "Fitter-H"- http://www.1999.co.jp/eng/10326154 ref.0856 - Su-17/22M-4 "Fitter-K"- http://www.1999.co.jp/eng/10326155 ref.0857 - Su-25 "Frogfoot-A"- http://www.1999.co.jp/eng/10326156 ref.0858 - SU-25UB/UBK "Frogfoot-B" - http://www.1999.co.jp/eng/10326147 V.P.
  15. Without doubt the star of the show for *me*. Even if that so called F-35 turned up, these would still win, hands down. I will be working through my photos this week, but was very eager to get the Su-22's done.... Hope you enjoy! Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Note the chute is open before touchdown! Polish Air Force Su-22M4 RIAT 2014 by Totallyrad.co.uk, on Flickr Thanks for looking.........
  16. Hello I thought I'd do this group build. I recently discovered my local model shop and have been 3 times in the last few days. Today I bought this kit for £5 - and it's entirely complete. I was pretty suprised to be honest but happy with it. The only thing I want to do is get different decals - I hate having generic USSR decals so I might get some Polish ones or print my own. This is the last kit I'm doing entirely by hand I hope (airbrush should be coming soon) but the first I'm going to build extra detail for - including printing cockpit details, making some joysticks and such from spare parts, and so on. Any advice is appreciated but I'm not going for the most accurate model ever. I'm not as amazing as some of you lot so it frustrates me too much to do so I started the kit today for this - I've done pretty much nothing but thought I'd share and update when I can (hopefully daily). So the box was very pretty for what it was, I like the artwork. The instructions (haven't photoed) are really handy too - separated into inside, wing assembly, fuselage, painting, decals. The first thing that happened? Well it's an oldish kit I think. Either way there was a small crack as part of the kit came of the sprue. Some left over green stuff from my Warhammer times (which I may get back into...*sigh*) came to the rescue. The inside is messy, but I'm not too fussed as it wont be visible at all. I used some Skull White to undercoat the inside of the cockpit and the pilots seats. They don't look great, but they'll be fine once some detail is added. And then I realized...I'm going to have to do some work - Green Stuff to the rescue again? Or anyone got a better idea?
  17. Build 9 Su-22? Sorry Dragon, you got it wrong! Because the markings supplied are only for a Russian Fitter, Su-17M4 is the correct designation, Su-22 is only used for export versions. Now that's cleared up... ;)This looks to be a very nice little kit and I'm looking forward to building it. It'll be built OOB except for the wing/wing glove joint which will need some work. Price: 99p eBay. The decals have yellowed a little and are currently Blu Tacked to my window...
×
×
  • Create New...