Search the Community

This has been sat on my desk for months 80% complete. It’s the Roden 1:72 kit of WWII British Armoured Car (Pattern 1920 Mk 1) finished as “Ajax” of the 1 Armoured Car Company RAF in Iraq in 1941 (or so the box says). Brush painted used Vallejo acrylics and weathered (rather more than intended) using a variety of acrylic washes, Army Painter quick shade washes and dry brushing with oils. Headlamp glass made from some Humbrol clearfix. Not my best work, some of the fit was so-so and as I said I’ve made it a bit grubbier than intended. But that RAF roundel on the turret came out ok, so not too unhappy. Thanks for looking.

This was a little project I've had on the go for the last year. It is a Corgi Rolls-Royce Corniche that was either an eBay or car boot sale cheap buy; I think I wanted one when I was younger but never got my hands on one. I was inspired by various YouTube diecast restorations. A couple of before photos. And after. I wasn't sure I could match the metallic paint, so I went for solid Vauxhall burgundy, which I rather like. It took a while to get a good finish but some micromesh and polishing compound (not at the same time) brought it up lovely. I also managed to fill and rebuild the front number plate and driving lamp. I wasn't keen on the original interior colour, so I changed that with some enamel paint, chrome detailing was added with Molotow pen except for the wheel centres, which are silver sharpie.

British R-R Armoured Car 1914/1920 pattern (VS-010) 1:35 Meng Model via Creative Models Ltd. As a precursor to tanks, the Admiralty were casting around for armoured protection for vulnerable patrolling soldiers, although as tanks originated as “land ships”, perhaps this was an extension of their thinking. They took a small sample of unfinished Silver Ghost chassis and designed the superstructure to cover the engine and crew, adding a circular turret that held a machine gun and could rotate fully – an idea that predates the early tanks, which makes one wonder why these didn’t make an appearance sooner in British tanks. They were used briefly on the Western Front in the Middle East and after WWI ended, they were handed over to the other services and reinvigorated in 1920 to add an extra Lewis gun on the top of the turret to augment the Vickers .303 and a new Boyes anti-tank rifle to give them a fair chance if they encountered any enemy armour. Later on a cupola was added for the commander, and after the replacement of the ageing RR engine with a Fordson unit, it was renamed as the Fordson Armoured Car. Fewer than 100 vehicles were still in service early in WWII and they took part in some operations before being withdrawn in 1941 as they were hopelessly outdated by then. The Kit This is a brand-new tooling from Meng, and as a modeller with an interest in the old RR, I’m happy to put my old kit from another manufacturer to the back of the stash. It arrives in a smaller-than-normal both with satin finish and the usual high standard of artwork on the front, with four sprues in sand-coloured styrene plus body and turret shells in the same colour. Six black flexible tyres, four poly-caps on a tree, a small sprue of clear parts and a fair-sized fret of Photo-Etch (PE) parts made from thick brass that will be used to depict spokes if you’re modelling a decal option with wire wheels. The decal sheet is mostly roundels plus a few other stencils and unit markings, and the instructions with separate colour painting guide complete the package. Construction begins with a decision over which decal option you plan on building, as there are some differences between the equipment carried, so knowing where you’re going now will help prevent mistakes later. The chassis is first to be made, and a central sub-frame that depicts the underside of the engine onto which the outer rails are fixed, trapping the fuel tank and front brace between them, then joined by front axle, long exhaust with two mufflers and a flared tip, and three brackets each side on the chassis rails. The clutch is attached to the rear of the engine and that leads to the drive-shaft for the rear axles that is controlled by being slipped into holes in the ends of the rear inverted leaf-springs. That’s most of the Rolls-Royce chassis done, so attention moves to the superstructure, which is already well defined by the single hull part, which has the rear doors and the radiator front at the end of the long bonnet/hood. The floor of the body is joined with the chassis and hull, then a wooden palette is installed in the rear, then built-up with shallow sides and brackets for stowage boxes that are made up and glued in place during the construction. Further armour panels are arranged around the fuel tank for obvious reasons, and small stowage boxes are fitted in the outside corners. A different type of long stowage boxes are also provided with a simplified structure and no grab-handles. At the front, Starter-handle, armoured radiator panels, mudguards and lights with clear lenses are all fixed in place, and the running boards are made up with more storage and small barrel on the port side, plus unditching ramps on both sides. There are two styles of wheels supplied in the box, with the wire wheels being the most notable due to their clever PE spokes that are joined together at the rim and spaced out in the centre with a poly-cap hidden in the middle to achieve the correct dish to the spokes. Each sub-assembly is then sandwiched between two styrene half-tyres at the front and for the spare, but with two rim parts keeping the rear wheel spokes in place within a single outer tyre (again, styrene), using two on each side to give it the weight bearing capability. The more modern flexible tyres are used in conjunction with stamped rims that slip inside them and have the poly-caps held inside the bearing by a small cap. Because of the wider tyres used, there are only four wheels on the ground with just a brake drum differentiating the rears from the front. The road wheels slide onto the axles while the spare fits onto a depression in the port side that mates with the T-shaped hanger. The shallow turret is where the rest of the differences arise, and it begins with the base and the C-shaped turret side that is completed by adding the front with the aperture for the Vickers MG, clipping into a simple mount and gluing into the ring. For the early machines the roof and hatch finish it off, but for the modernised vehicle, a different front section is used with an additional aperture for the Boyes anti-tank rifle carried in decal option C. The rifle is a single well-detailed part that slides into place and is boxed in by a small cheek piece. The top Lewis gun is attached to a two-part mount, which rotates on a three-piece ring that is assembled so that it can traverse by leaving the centre part unglued. A “dinner-plate” magazine fits on top of the gun, and a small mantlet slips over the Vickers gun in the turret. The turret attaches to the hull by the usual bayonet mechanism, which completes the model. Markings There are four markings options on the decal sheet, split between 1914 and 1920 pattern vehicles with a nice variation in schemes that include two monotone vehicles and two with different types of camouflage. From the box you can build one of the following: Pattern 1914, Western Front, WWI, 1916 Pattern 1914, WWI Patern 1920, RAF Egypt, 1942 Pattern 1920, RAF Decals are printed in China and have good registration, sharpness and colour density, with a thin satin carrier film cut close to the printed areas. Conclusion Lovely! I’d have liked a full engine, but in fairness how many people would have posed those cowlings open? Not many I suspect. Excellent detail, good wide spread of decal options, and Meng quality throughout. Very highly recommended. Review sample courtesy of

G-ASLW served with the RAF as WS829 before being sold to Rolls-Royce in September 1963 for use as a photographic chase plane. It was sold in July 1969 and after it was attempted to illegally export the aircraft to the Biafran Air Force ran short of fuel and ditched in the sea off the Cape Verde Islands. This is the old Matchbox Meteor NF14 with home made decals. Thanks for looking. Steve

Hi everyone, I've joined this forum hoping to learn and share ideas on scratch building model making. I started out making airfix kits of spitfires like many of us do, at around the age of 13 and my new found hobby quickly became more than just something to do in my spare time. Fast forward 22 years and I'm now studying for an MA in Design. With model making being my background I've decided to build a model of a new concept design for the Rolls-Royce FAB1 limousine from Thunderbirds. The idea of this model is to explore the relationship between client and model maker, and to investigate how clients value models and what makes models valuable to them. Hopefully I'll be able to share my work in progress here and seek assistance where and when I could do with it. cheers, 'Parker'