Search the Community
Showing results for tags 'Really? Another one?'.
Found 1 result
-
So I have it in my head that I would like to make a Bf109E-1 using the Bf109E-4 kit. I have a few decal options, but am yet to decide. Most probably something using RLM 70/71/65 scheme. So while my rag wing Hurricane is in paint dry mode I made a start. The most significant visual differences required to represent an E-1 are the earlier style canopy, and the wing cannon needs to be removed, with machine gun holes slightly inboard from the cannon position. Also the cannon (access ?) bulges need to be removed, with new access panels engraved for the MG's. Squadron Vac form canopy (early style), poorly cut out by me, is a little narrow. However it sits a little wider when pushed down. I will most likely use a spare canopy out of an Avis Bf109D-1 kit. Two are supplied, and although a bit thick and one piece, this will provide me an excuse not to put too much effort into the interior. The wings of an old Airfix E-4 were used to trial the removal of the cannon bulge. The bulge is not solid, so a hole appears when getting close to flush. I decided to fill the inside of the bulge with sprue.....somehow. First I tried softened/melted sprue...... .....but this didn't bond well enough to the wing. So I filled the hollow with glue and sprue shavings, mixing them with a cocktail stick. Fumes nasty braincells kill do....huh ! I also made shallow cuts along the aileron joint, to slightly lower both, as they both sit down a little when the flaps are lowered (which they will be). Started opening up the front cover of the exhaust manifold, to better represent the real thing. Has taken me nearly as long to get the pics up, as to get to this stage in the build.
- 11 replies
-
- 2
-
-
- 1/72
- Messerschmitt
- (and 1 more)
