Search the Community

First post for a while so a new build, thought a Vietnam era A-1 would just be the ticket. Armed with a bit of aftermarket like the lovely Brassin seat and some Quinta office decals I thought why not. Not much progress so far just the basic's of the pit. The seat is a real gem and paints up really well. Enjoy folks

Ki-61-Id Interior 3D Decal (QD48141 for Tamiya) 1:48 Quinta Studio When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a Ziploc bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the ageing Tamiya kit of this WWII Japanese fighter, and it will benefit greatly from the attention that Quinta have lavished on it. The set comprises just one sheet of decals that although small are commensurate with the size of the cockpit itself. It contains a complete instrument panel with multiple angled sections, side wall details; a corrugated oxygen hose and regulator; wiring and a set of lap-belts for the pilot’s vague convenience and mild safety. What was it with WWII Japanese fighters and their poor seatbelt and general crew safety provision? Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, the corrugations of the oxygen hose assembly and overall impressive crispness of the set. This cockpit once complete really needs a crystal-clear or opened canopy to show off the details. I have a vacformed one standing by already. Very highly recommended. Review sample courtesy of

F/A-18F & EA-18G Blocks 25+ (QD48243 for Meng) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a Ziploc bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the Meng kits of the type later than block 26, which you’ll need to look into yourself, as I’m clueless on that matter. The set comprises four sheets of decals, containing two beautifully detailed instrument panels with glossy MFD screens, side consoles with plenty of relief, sidewall inserts with cushioned black panels and document bags that have organic-looking creases printed-in, plus two full sets of seatbelts and an actuator loop between the pilot’s knees to get him out of there in an emergency. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, relief of the consoles, deep gloss in the MFDs and overall impressive crispness of the set. Any cockpit with a Quinta set installed really needs a crystal-clear or opened canopy to show off the details, which the Meng kits are able to provide straight from the box. Very highly recommended. Review sample courtesy of

OV-10A Bronco Interior 3D Decal (QD48227 for ICM) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a Ziploc bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the fabulous and much anticipated ICM kit, which has a great big clear canopy through which you’ll be able to see all that detail. The set comprises three sheets of decals, containing instrument panels for the pilot with upper ancillaries plus two styles of panel for the USAF or USN rear seater, and a large instrument pack for the rear shelf. There are also side console decals 3D relief on the rear consoles, additional black boxes and a document bag for the sidewalls, small levers, and a full set of seatbelts for both the crew’s convenience and safety. Finally, there is a striped yellow and black pull handle to the side of the headbox, which is also augmented with a relief decal to add detail. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, glossy dials and impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details, and you’ll find one of those in the kit's clear sprue, providing you mask it off as you start. Very highly recommended. Review sample courtesy of

After a hectic month or so I need a bit of modelling tonic. The Bucc is on hold as its turned into a mare after the drop incident so I was looking for something a bit more straight forward to knock about. Chose this kit from the stash. And thought I'd add these, first time using them so hopefully it will go okay. Lets see how this goes together.

B-26K Counter Invader Interior 3D Decal (QD48237 for ICM) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a Ziploc bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the recent 1:48 ICM kit, and it’s a beautiful-looking set. It comprises four sheets of decals, first requiring you to remove some sections of moulded-in detail from the fuselage inner sides. Then you add new instrument panel; sidewall details; centre console with extra levers; overhead console; additional instruments on the rear bulkhead; large sheets of diamond-quilted green sound insulation for the sidewalls, bulkheads and even the clear canopy part; plus a full set of seatbelts for the three crew’s convenience and safety, consisting of four-point belts for the flight crew, and lap belts for the rear crew. To assist you with completion of the task, a pair of bright blue template decals are included on one sheet to give you the correct sizes to make your own bases for some of the decals. Conclusion The detail on the decals is incredible, even down to the infinitesimal switches and impressive crispness of the set. This cockpit really needs a crystal-clear canopy to show off the details, maybe leaving the opener on the top ajar to give a better view. Very highly recommended. Review sample courtesy of

He.219 Uhu Interior 3D Decal (QD48229 for Tamiya) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the ageing Tamiya kit of this wasp-like aircraft, which while it is getting on in years, doesn’t seem like it will be superseded any time soon, as it is still a great kit – a testament to Tamiya’s tool-making capabilities. The set comprises two sheets of decals, containing an extensive instrument panel of four parts, one circular dial needing a base that could be made from a short piece of styrene rod; rudder pedal straps; headrest and lap belts for the rear crewman; a set of four-point seatbelts and headrest for the pilot’s convenience and safety; a mass of sections of the radio ‘wall’ that takes fourteen decals in total, and as with some of the other parts, needs the kit detail sanding off; detailed side consoles, and similarly busy side walls to the cockpit. Awesome stuff. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, glossy dials and impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

F4U-1D & F4U-1 Birdcage Corsair Interior 3D Decals (for Tamiya & Hobby Boss) 1:48 Quinta Studio When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a Ziploc bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. F4U-1D Corsair (QD48108 for Tamiya) This set is patterned for the Tamiya kit. The set comprises one sheet of decals, containing the instrument panel with additional sub-panels to the sides; side consoles with additional parts for the console walls, including a document folder; equipment and instruments for the cockpit sidewalls; levers and a full set of seatbelts for the pilot’s convenience and safety. F4U-1 Bird-Cage Corsair (QD48126 for Hobby Boss) This set is patterned for the Hobby Boss kit, which could use the help. The set comprises two sheets of decals, containing the instrument panel with additional sub-panels to the sides; side consoles with additional parts for the console walls; equipment and instruments for the cockpit sidewalls; levers and a full set of seatbelts for the pilot’s convenience and safety. Very similar to the other set, so you might be experiencing a bit of déjà vu about now. Conclusion The detail on the parts for both sets is incredible, even down to the infinitesimal switches and impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Grumman F-14D Tomcat Interior 3D Decal (QD32033 for Trumpeter) 1:32 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the big Trumpeter Tomcat, love it or hate it. The set comprises four sheets of decals, containing two superb individual instrument panels with MFDs with shiny screens; side consoles that bristle with switches and levers; additional black boxes and switch-panels; levers; control column buttons; sidewall equipment and greenish insulation; and a full upgrade of the ejection seats including cushions, seatbelts for both the pilot’s convenience and safety. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, realistic screens, seat cushions and impressive overall crispness of the set. This cockpit deserves a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Su-27 Flanker-B Interior 3D Decal (QD32088 for Trumpeter) 1:32 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the big Trumpeter Flanker, and it should give its cockpit a huge boost. The set comprises four good-sized sheets of decals, containing a beautiful multi-layered instrument panel; replacement side consoles and rear bulkhead; rudder pedal details; levers; sidewall surfaces; a comprehensive update to the seat, including new cushions, a full set of seatbelts for the pilot’s convenience and safety, leg restraints and other details. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, the quality of the cushions and overall impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Albatros D.V (QD32085 for Wingnut Wings) 1:32 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even if they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a Ziploc bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the Wingnut Wings Albatros D.V, and is probably the only aftermarket these kits could want or need. The set comprises two sheets of decals, starting with a rear bulkhead that has a choice of linen or lozenge-coloured covers; instruments and compass for the simple panels of the day; key-like switches on the panel; a length of bead or chain and a dial for the right sidewall; a set of detailed four-point harnesses for the pilot, and an exquisite button-quilted cushion for his seat that has just the perfect amount of shine to represent leather; realistic wood pattern and textured floor panel; two wood effect panels for either side of the engine block; details for the ammo feeds and tanks inside the fuselage; a substantial number of raised inspection hatches for the exterior of the fuselage, wings and the aerofoil between the wheels, all of which will improve an already excellent model substantially. Conclusion The detail on the parts is incredible, down to the stiffening around pass-throughs, the dials, that seat, and overall impressive crispness of the set. This WWI cockpit is open to the air, which is just the ticket to show off the superb details. Very highly recommended. Review sample courtesy of

Su-25 Frogfoot interior 3D Decal (QD48249 for Zvezda) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the new Zvezda Su-25 Frogfoot that has just reached the market. The set comprises two sheets of decals, containing a pair of sidewalls with additional parts added to give it more relief, and here the first instruction step shows you how to create the stand-off parts own backing by soaking the decal paper in super glue (CA) and cutting it to size. A pair of decals are joined back-to-back and set in the corner of the windscreen with another flat decal just under it, then the instrument panel, side consoles and the rear bulkhead are glued in place with a number of additional levers and decals added along the way. The seat needs a little ground off one part and the corners built up with some filler, and the cushion ground off the headbox before the cushion decals, seatbelts, leg-restraints and stencils are added to create a highly realistic-looking seat. The base of the HUD is given a decal front and the projection lens is depicted by a green disc that appears to glow green, and the rudder pedals receive textured surfaces. This is a review for the complete set, but the set is also available as the instrument panels only, and the seat and other cockpit details, as you can see from the links below. Conclusion The detail on the parts is incredible as is usual with Quinta products, even down to the infinitesimal switches and impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details, which the kit supplies along with an access ladder. Very highly recommended. Full Set (QD48249) Small Set (QDS-48249) Additional Set (QDS-48249toQD48249) Review sample courtesy of

Ju.88A-4 Interior 3D Decal (QD32114 for Revell) 1:32 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts that are used or replaced and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Although you are advised to use Super Glue (CA) to attach the decals to the surface permanently, preparation is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the big Revell Junkers Ju.88, which is a nice kit in itself that deserves a little extra detail in the cockpit area, especially given its size and the expansive greenhouse of a canopy. The set comprises a staggering six sheets of decals, three of which contain identical sets of crew seatbelts, which are laminated up with comfort pads, adjusters and other details for each of the aircrew. These can be draped however you like on the seats, with the instructions showing a few suggestions to help you on your way. The main instrument panel is a tour-de-force of detail, with additional decals adding extra depth, more instruments on the yoke, and straps for the rudder pedals. The radio panel is completely redone with superbly accurate fronts that are simply stunning. The bomb-sight is similarly redone with dials, knobs and buttons added to the kit part, and a realistic slab of wood grain effect for the plotting table. The other instruments around the cockpit are many and varied, adding depth, detail and colour to the area in heaps, as you can see from the instructions above. The final aspect of the set is the sheet of ammunition belts that are used to adorn the various crew-served self-defence weapons around the airframe, getting more detail and colour in there than most of could achieve with a lifetime of practice. Conclusion The breadth of the set and the detail therein is incredible, even down to the infinitesimal switches and impressive crispness of the set. This cockpit will be so impressive after completion that you will be desperate to open the canopy to show off the details. It’s not a cheap set, but it is large, comprehensive and worth the expense. Extremely highly recommended. Review sample courtesy of

Yak-9D Interior 3D Decal Set (QD48281 for Zvezda) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels with decals if you're lucky, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a Ziploc bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue, and not using decal softener due to the possibility of it melting the resin. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the brand-new Zvezda Yak-9D in 1:48, and includes all manner of goodies. The set comprises two sheets of decals, containing a superbly detailed instrument panel and side consoles, additional black box fronts, levers and a full set of seatbelts for the pilot’s convenience and safety. The coolest parts are the pair of fuel gauges that are fitted flush with the wing top surface. The kit has clear lenses, which are over-thick, so this set replaces them with an inverted printed dial under a spacer in white resin, then a clear lens with bezel to go over the top. There are two types of gauge dials, and those are the white circular parts on the sheet with L and R printed on them to show which wing they fit in. very clever! There’s even a flare pistol for attachment to the floor by the seat. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches and impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Su-30MKK Family Interior 3D Decal (QD48047 for Hobby Boss Kits) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention recently they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch brass panels with either two steps of etching, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of relief as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces, MFDs and metallic-effect hardware, often also including cushions and seat belts in the set. Each set arrives in a ziplok bag with two folded instruction booklets protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the detailed nature of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the truism that pictures speak a thousand words. Additional hints and instructions for the uninitiated are also included, marking out parts needing bases, kit part numbers and other useful tips. The technical instructions in the text-based sheet give additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would fit the bill, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the Hobby Boss kits of the Su-30MK, MK2, M2, MKV, MK2V and MKK. The set comprises one large sheet, containing instrument panel sections, multiple large MFD panels surrounded by buttons, dials and other instruments, the former having a deep green shiny finish, just like the real displays when switched off. The panels are in the more modern brighter bluish shade, and includes the side consoles plus the side wall framing and insulation that have flat-spots on them to accept other parts on the sheet for the ultimate in relief. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, the texture of the insulation and impressive crispness of the set. Any Quinta outfitted cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Su-27UB Interior 3D Decal (QD72020 for Zvezda) 1:72 Quinta Studios When Quinta’s innovative products first came to our attention recently, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or pre-painted Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of relief as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces, MFDs and metallic-effect hardware, often also including cushions and seat belts in the set. Each set arrives in a ziploc bag with two folded instruction booklets protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the detailed nature of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to pictures speaking a thousand words, as they say. Additional hints and instructions for the uninitiated are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based sheet give additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the 1:72 Zvezda kit of the two-seater Sukhoi Su-27UB, so you get two of pretty much everything. The set comprises two sheets of decals, containing instrument panels; multiple large glossy instrument dials and a couple of small MFD panels on inserts, having a deep green shiny finish, just like the real displays when switched off. Side consoles and cockpit sidewalls are covered in new panels with quilted insulation, and the seats are decked out with new belts, cushions and leg harnesses to replace the kit parts, the cushions having a realistic crinkled finish to the vertically stitched surface and side-panels. The interior is in the more modern bluish grey shade, and you will of course have to remove the moulded-in detail to the cockpit surfaces. The detail is still impressive in 1:72, and includes sections of the bulkheads behind each ejection seat. Conclusion The detail on the parts is impressive for the scale, especially in the seat department. Any Quinta outfitted cockpit really needs a crystal-clear of opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Mig-29SMT Interior 3D Decal (QD32022 for Trumpeter) 1:32 Quinta Studios When Quinta’s innovative products first came to our attention recently they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or pre-painted Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of relief as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces, lustrous MFDs and metallic-effect hardware, often also including cushions and seat belts in the set. Each set arrives in a ziploc bag with two folded instruction booklets protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the detailed nature of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to pictures speaking a thousand words, as they say. Additional hints and instructions for the uninitiated are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based sheet give additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the 1:32 Trumpeter kit of the hunchback Mig-29SMT, which is one of those gorgeously ugly aircraft in my opinion. The set comprises three sheets of decals, containing instrument panel sections; multiple large glossy MFD panels surrounded by buttons that the camera doesn’t quite do justice to, having a deep green shiny finish, just like the real displays when switched off. Side consoles and cockpit sidewalls are covered with new parts, and the seat is festooned with new belts and cushions, the latter having a realistic crinkled finish to the vertically stitched surface. Even the sides of the consoles receive attention, as does the HUD box, with a yellowish lens, and the control column is upgraded with a set of buttons that are just superb. The panels are in the more modern bluish grey shade, and you will of course have to remove the moulded-in detail to the cockpit surfaces, as shown in the first diagram on the instructions. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, the texture of the seat cushions and impressive crispness of the set. If you think the 1:48 sets are impressive (they are), the impressive dial goes all the way up to 11 in 1:32 scale and larger. Any Quinta outfitted cockpit really needs a crystal-clear of opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Mig-29 Vacuformed Canopy (QC48008 for all GWH) 1:48 Quinta Studio Quinta are renowned for their superb 3D Printed cockpit decals, but they also have a range of crystal-clear canopies, some of which we’ve reviewed in the past. This set provides a replacement canopy and windscreen for all of Great Wall Hobbies (GWH) single-seater Mig-29s, of which there are a few. It arrives in a small Tupperware style container with a tear-off section to access the lip of the lid. Once removed from the box (which is useful in itself), the canopy is protected in a small Ziploc bag that has an adhesive label applied to one side. The vacformed canopy is a delight to behold, literally crystal clear with frames moulded-in with good sharpness thanks to the female moulding process used in all good vacforms. It will provide the perfect complement to their 3D cockpit sets to show off all that lovely detail, and it would be a great idea if they were also sold as a package. Just thinking out loud, of course. The corners of the forming material have been removed at source to protect the packaging, and to stop you poking or scratching yourself with a sharp corner, and those corners can be really sharp from my experience. How to Vacform Some of us are a little phobic about vacforms in general, and when we’re talking about canopies there’s no need to be, as they’re small and relatively easy to cut out of the sheet thanks to their thinness. Pack the interior of the canopy with Blutak and run round the border with a brand-new sharp scalpel blade, lightly at first. With successive strokes you will see the canopy start to come away from the carrier, so keep working until the whole thing is free. At this point you can test fit it and trim away any excess carefully with a sanding stick or very sharp scissors (I prefer the former). If you are separating the windscreen from the canopy, perform the same actions along the cut-line while the Blutak is still in position. When you remove the Blutak, you may need to remove the residue with a soft cloth, and a dip in Future/Klear will improve the clarity even further. To attach the canopy to your model, use either a PVA-based canopy adhesive, or GS-Hypo cement, which is my personal favourite. Conclusion Shiny, incredibly clear and pocket friendly. There’s nothing more to say really! Very highly recommended. Review sample courtesy of

Fi-156 Storch Interior 3D Decal (QD48078 for Tamiya) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention recently, they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or pre-painted Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of relief as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces, MFDs and metallic-effect hardware, often also including cushions and seat belts in the set. Each set arrives in a ziplok bag with two folded instruction booklets protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the detailed nature of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to pictures speaking a thousand words, as they say. Additional hints and instructions for the uninitiated are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based sheet give additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the excellent Tamiya kit of the type that was released a few years back now, but it’s still the top of a very small heap by quite a way. The set comprises two small sheets, containing instrument panel sections, two large radio boxes, levers and other instruments, the dials having a lustrous shiny finish, just like the real glass panes. The panels are in the RLM 66 dark grey, and includes mag straps if your Storch was fitted with a self-defence machine gun, seatbelts for up to three crew members, rudder pedal straps, plus small instruments on the canopy internal framework. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, the texture of the main panel and impressive crispness of the set. Any Quinta outfitted cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

Mi-24V Hind & NATO Hind Interior 3D Decal (QD48026 & QD48036 for Zvezda Kits) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention recently they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or pre-painted Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of relief as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces, MFDs and metallic-effect hardware, often also including cushions and seat belts in the set. Other brands are starting to come to market now offering similar products, but in this reviewer’s personal opinion the Quinta sets are still the best. Each set arrives in a ziplok bag with two folded instruction booklets protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the detailed nature of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to pictures speaking a thousand words, as they say. Additional hints and instructions for the uninitiated are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based sheet give additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. While some might argue that they’re not really decals, they arrive on decal paper so to me they’re decals. This set is patterned for the Zvezda kit so that you can depict it in the older green cockpit for a Soviet era aircraft, or a NATO chopper with black interior and an almost identical set of instruments. Each set comprises one large sheet of decals, containing instrument panel sections, multiple switch panels festooned with buttons, dials and other instruments, and a single screen, the black version supplied on a separate section for additional depth when complete. The Soviet era panels are in the Emerald Green shade, while the NATO bird is deepest black, and both include additional consoles, panels and a full set of crew seatbelts. Pictures shamelessly taken from Quinta’s own website Conclusion The detail on the parts is incredible, even down to the infinitesimal switches, the texture of the belts and impressive crispness of the set. Any Quinta outfitted cockpit really needs a crystal-clear of opened canopy to show off the details. Very highly recommended. Crocodile Hind (48026) Emerald Green Interior NATO Hind (48036) Black Interior Review sample courtesy of

Petlyakov Pe-2 Interior 3D Decal & Vacform Canopy (QD48011 & QC48011 for Zvezda) 1:48 Quinta Studio When Quinta’s innovative products first came to our attention a little while ago they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of relief as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions are text-based, giving additional tips to the new user regarding maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is for the Zvezda kit of this type that first hit our shelves in 2015. The cockpit area from the box is relatively modern, but suffers from totally blank instrument panels that are fitted with decals during construction. This set includes a complete set of new 3D instruments, with additional details added over the main panels for extra relief, it also has a number of instrument packages that are sat next to the two crew, and yet more on the cockpit sidewalls. Finally, you get a bonus of two complete sets of four-point seatbelts for the top crew, and another pair of lap belts for the waist gunner inside the fuselage. If you’re wondering if any of this beautiful looking detail will be seen under the kit canopies, then I have news for you. Quinta have also created a full set of clear vacformed canopies for this aircraft, which has a relatively large amount of greenhouse glass to contend with. Read on. Pe-2 Vacform Canopy (QC48011) 1:48 Quinta Studio Some aircraft have a few canopies, some have a seemingly endless greenhouse of glazing just waiting for your fingerprints or masking disasters. The Zvezda kit of the Pe-2 has a fair number of clear parts, and the necessary thickness of styrene canopies reduces visibility of the interior. If you’ve spent any time working on the detail inside the aircraft, you’ll want a clear view into the fuselage so that all your effort isn’t wasted. If you’ve used the 3D printed decals above, you’ll be highly motivated to show them off, which is just what this set is designed for. It arrives in a sub-miniature Tupperware style box, with the contents secured in a ziplok bag, and each part further protected within its own smaller bag. There are no instructions, as once you’ve cut the canopy parts from the backing sheet, they can be glued in much the same way as the kit parts, and masked as usual. The frames for these parts are very well defined, so there should be no issues with masking them, but unlike styrene canopies, you’ll be best served by either trying some commercial masking sets, or using thin strips of tape to line the frames and fill in between with more tape or masking fluid. The set includes the following glazing panels: Two oval waist gunner windows in the sides of the fuselage Two small C-shaped windows on the fuselage sides above the waist gun ports Clamshell top window/hatch for waist gunner with pop-up forward windscreen to deflect the slipstream Clear floor for the forward cockpit Canopy with a separate rear turret for the aft gunner Flush wing-light cover If you’re new to using vacform canopies, here are a few tips. Push Blutak into the hollow interior of the vacformed parts to give it some rigidity while handling. Cut off any rigid edges with scissors before beginning the cut-out process. When cutting out the canopy, use a brand new #11 blade, and proceed slowly, using gentle, shallow cuts. Some folks use fine scissors to remove the backing sheet, although I’ve never felt the urge to try it as a blade works for me. Once the canopy has been removed, trim the edges in easy stages to refine fit with the model and test fit frequently. To trim the canopy down, you can use fine scissors (taking care not to close the blades fully), or a sanding stick, being careful not to scratch the clear panes. When you’re happy with the shape, remove any remaining Blutak and clean the screen to remove any residue and finger oils, then dip it in Klear/Future to give it a glossy finish that will allow you to strip it back if you make a mistake. If you make a mistake when painting or gluing, drop your canopy in a sacrificial bath of Klear/Future, and the paint/superglue will just flake off into the liquid if it hasn’t breached the Klear barrier. They’re really not as hard to use as people seem to feel. If I can do it with my big stubby fingers, you can too! Conclusion You have to see them to believe how good they are, and for a turn-key solution they are without match in the hobby right now. Add to that the seatbelts, the incredibly competitive price, and they’re a must-have for anyone that isn’t a cockpit painting master. A true innovation. Add the crystal-clear canopies to your build, and you’ll end up with a brilliant model. Extremely highly recommended. 3D Printed Instrument Decals (QD48011) Vacform Canopy (QC48011) Review sample courtesy of

Lockheed P-38F/G Lightning Interior 3D Decal (QD48031 & QD48030 for Tamiya) 1:48 Quinta Studios When Quinta’s innovative products first came to our attention a few months ago they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the still new Tamiya kit of the P-38F/G Lightning, the twin-boom heavy fighter from Lockheed that was hugely successful in its role. The set comprises one sheet of decals, containing instrument panel sections, side consoles, additional black boxes, levers and a full set of seatbelts for the pilot’s convenience and safety. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches and impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. P-38F P-38G Review sample courtesy of

Mig-29 SMT (9-19) Interior 3D Decal (QD48024 for Great Wall Hobby) 1:48 Quinta Studios When Quinta Studio’s innovative products first came to our attention a few months ago they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based, giving additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. Application is much the same as your standard decal, but you will need to remove any raised detail that would be underneath the location depicted in the instructions, and some new parts will need small backing panels or bases on which to apply the decal. A slim piece of sheet styrene would perform that task, and painting the edges a matching colour should minimise its appearance or turn it completely invisible. This set is patterned for the lovely/ugly Great Wall Hobby (GWH) Mig-29SMT (9-19), with its distinctive spine hump that houses additional avionics. The set comprises one relatively small sheet, containing instrument panel sections, and two large MFD panels surrounded by buttons and other instruments, the former having a deep green shiny finish, just like the real displays when switched off. The background to the panels are in the more modern bluish shade, and includes the side consoles plus the electronics panel, part C66. Conclusion The detail on the parts is incredible, even down to the infinitesimal switches and impressive crispness of the set. This cockpit really needs a crystal-clear or opened canopy to show off the details. Very highly recommended. Review sample courtesy of

A-10A Thunderbolt II Interior 3D Decal (QD32008 - For Trumpeter Kit) 1:32 Qunita Studio When Quinta’s innovative products first came to our attention a few months ago they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces, lustrous MFD screens and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based sheet gives additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. This set for the Large scale Trumpeter kit supplies the instrument panel, side consoles and additional instruments on the A-10's front screen frame. Also included are the cockpit anti-spalling side pads, ejection seat pads, seat belts, seat handles and seat placards, as well as RBF tags. Conclusion They’re still a highly impressive product and look to be very useful, even more so to those who are not fans of PE (Like myself). Very highly recommended. Review sample courtesy of

F-16I SUFA Interior 3D Decal (QD48046 - For Hasegawa Kit) 1:48 Quinta Studio When Quinta’s innovative products first came to our attention a few months ago they caused quite a stir, as well they should. The replacement Instrument Panels and internal details are mind-boggling to look at, because we’re used to seeing simplified styrene instrument panels, or Photo-Etch Brass panels with either two layers of etch, or laminated parts that can be tricky to glue together, even though they are pre-painted for your ease. But decals? These aren’t your run-of-the-mill decals though, they’re 3D printed in many layers and colours on a flat carrier film, having as much in the way of elevation as is needed to complete a realistic panel printed in the correct colours, complete with shiny dial faces, lustrous MFD screens and metallic-effect hardware, and often including cushions and seat belts in the set. Each set arrives in a ziplok bag with a folded instruction booklet protecting the decals, which are also separately bagged, so they should reach you in good condition. The pictorial instructions are printed on glossy paper, and are shown in full colour as befits the awesomeness of the sets, showing exactly where each part should go on the actual model, so there’s no confusion due to the “pictures speak a thousand words” maxim. Additional hints and instructions are also included, marking out parts needing bases, kit parts and other useful tips. The technical instructions in the text-based sheet gives additional tips to the new user about maximising adhesion and preventing lift at the edges by wicking in super glue. This set for the Hasegawa F-16I Sufa supplies all of the front and rear instrument panels and side consoles. Also included are the cockpit sidewalls, seat pads, seat belts, seat handels and seat placards, as well as RBF tags. Conclusion They’re still a highly impressive product and look to be very useful, even more so to those who are not fans of PE (Like myself). Very highly recommended. Review sample courtesy of